• 한국재료학회지
• /
• 제27권9호
• /
• pp.471-476
• /
• 2017

In order to improve the high temperature oxidation resistance and lifespan of mat type porous carbon insulation, SiC was coated on carbon insulation by solution coating using polycarbosilane solution, curing in an oxidizing atmosphere at $200^{\circ}C$, and pyrolysis at temperatures up to $1200^{\circ}C$. The SiOC phase formed during the pyrolysis process was converted into SiC crystals as the heat treatment temperature increased, and a SiC coating with a thickness of 10-15 nm was formed at $1600^{\circ}C$. The SiC coated specimen showed a weight reduction of 8.6 % when it was kept in an atmospheric environment of $700^{\circ}C$ for 1 hour. On the other hand, the thermal conductivity was 0.17 W/mK, and no difference between states before and after coating was observed at all.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.1-8
• /
• 2024

Bonding wires are composed of conductive metals of Au, Ag & Cu with excellent electrical conductivities for transmitting power and signals to wafer chips. Wire metals do not provide electrical insulation, adhesion promoter and corrosion passivation. Adhesion between metal wires is extremely weak, which is responsible for wire cut failures during thermal cycling. Organic coating for electrical insulation does not satisfy bondability and manufacturability, and it is complex to apply very thin organic coating on metal wires. Automotive packages require enhanced reliability of packages under harsh conditions. LED and power packages are susceptible to wire cut failures. Contrary to conventional OCB behaviors, forming gas was not required for free air ball formation for both Ag and Pd-coated Cu wires with Al₂O₃ passivation.

• Composites Research
• /
• 제33권3호
• /
• pp.101-107
• /
• 2020

본 논문에서는 탄화규소로 코팅된 탄소-탄소복합재료의 단열 특성을 고찰하였다. 탄소-탄소 복합재료 상에 탄화규소를 화학증착법(CVD)법으로 코팅하였다. 먼저 탄화규소로 코팅한 복합재와 코팅되지 않은 복합재에 대해, 공기 중에서 1350℃의 온도를 급작스럽게 부가하였을 때의 단열특성을 서로 비교하는 연구를 수행하였다. 또한 본 연구에서는 최대 1700℃ 및 2000℃의 온도에 복합재의 표면을 노출시키는 고온 버너실험을 수행하였다. 버너실험 전, 후의 무게를 측정하여 무게변화를 고찰하였다. 고온 버너실험 후 탄소-탄소 복합재 및 탄화규소로 코팅된 복합재의 손상여부를 비교, 고찰하였다. 그 결과 2000℃의 온도에 노출 시 탄화규소 코팅재에서 박리, 균열, 공동 등의 결함손상들이 발견되었으나, 고온으로부터 탄소-탄소 복합재를 보호하는데 효과적이었다.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.829-834
• /
• 2016

Coil specimens were prepared by continuous coating on a copper wire with flexible PAI (polyamideimide) and PAI/nanosilica (5 wt%) varnish and thermally aged at 150, 200 and $250^{\circ}C$ for 5, 10 and 15 days, respectively. AC insulation breakdown voltage was investigated under inverter surge condition at 60 Hz and 1,000 Hz and insulation breakdown voltage decreased with increasing aging temperature and aging time at each 60 and 1,000 Hz.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.120-129
• /
• 1997

The fire protective coating can reduce certain damages in case of fire, also conserve energy by thermal insulation and prevent corrosion and errosion in normal daily life by means of blocking thermal transfer, that were generally made of organic, inorganic and metallic materials as adiabatic coating. In case of inorganic material such as soluble silicate, it produces less toxic substances which are exposed to Ore, and have a plenty of raw material. Also inorganic thermal insulator is good in heat resistance. To develope such a excellent inorganic thermal insulator, the study of fire protective coating using the alkali silicate is necessary The principle of intumescence for alkali silicate is from rapid evolution of water in the coating material, the quantity of water in it is of course influenced on the degree of intumescence. The phenomenon of intumescence in ternary silicate is increased as the radius of ion is bigger, and this is caused by evolution of so many kinds of water. The individual degree of intumescence is ordered like this ; $K^+$ > $Na^+$ > $Li^+$ . The best protection effect is similarity found to intumescence of ternary silicate. The result of X-ray diffraction analysis indicates that $KHSi_2O_5$ is an important ingredient in K-silicate.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.7-12
• /
• 2021

Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al₂O₃ coating and DLC coating were compared to find the optimal surface treatment method. Al₂O₃ coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.17-22
• /
• 2009

에폭시 분체도료는 부스닥트, 및 전기기기에 절연재료로 광범위하게 사용되어 진다. 특히 Coating 절연 방식의 경우 전류에 의한 줄 열로 인해 전기화재 및 폭발의 점화 원인이 된다. 본 연구는 에폭시분체도료의 열화특성에 대해 절연파괴, 아크방전, 수명특성(V-t)을 중심으로 비교검토하고 이에 대한 기초데이터 확보 및 전기화재 원인인 절연특성에 대해 연구 하였다. 온도변화에 따른 절연특성은 시편 KS가 유리전이온도(Tg) 이전까지 $8{\sim}10%$ 정도의 감소로 안정적이었다. V-t 및 아크방전특성의 경우, 열화시편에서도 안정적 특성을 유지하였다. 열화에 의한 전기적특성의 경우 시편KS가 우수한 성능을 가지고 있다.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.141-146
• /
• 2010

• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.63-70
• /
• 2003

It is very important to improve the insulation performance of curtain wall anchoring unit since it is composed of materials with high thermal conductivity, such as aluminium, steel and so on. This study aims to evaluate the heating energy performance and economical efficiency of various alternatives which are different in position and material of insulation. As results, alternative of inserting the urethane washer & pad and coating the anchoring unit with urethane foam can improve the heating energy performance and L.C.C(Life Cycle Cost) by 6.33% and 0.95%, respectively, as compared with the existing case.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.44-47
• /
• 2019

This paper is a study of recovery under load process of superconducting fault current limiter (SFCL). SFCL consists of five parallel-connected high-temperature superconductor (HTS) tapes additionally stabilized by stainless tape. Previously, HTS was heated by current pulse to simulate a short circuit in a power grid. During the cooling period, the current amplitude decreased to 23% or less of HTS critical current value, which is the simulation of network re-switching. When HTS with a polymer coating is cooled, temperature gradient on thermal insulation layer occurs, that prevents a boiling crisis and improves the heat sink into liquid nitrogen. Two samples are coated with a 30 ㎛ and 50 ㎛ polylactide (PLA) layers, reference sample has no polymer coating on it. Samples with a polymer coating show 3-5 times faster cooling than the reference one.