• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.232-237
• /
• 2008

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. The extraction of hot air from the space will enhance the performance of BIPV systems. The solar collector utilizing these two aspects is called PV/T(photovoltaic/thermal) solar collector. This research is about the development of solar roof system with PV/T collector to apply into buildings. A test cell experiment was performed with the PVT roof installed: It found that the hot air supply from the PVT air collector contributed to increase the heating efficiency by 2 times and the electrical efficiency by about 8%.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.157-159
• /
• 2009

LED BLU(Back Light Unit), based on MCPCB(Metal Core Printed Circuit Board) with anodizing oxide dielectric layer and improved thermal dissipation property, are presented. Reflecting cups were also formed on the surface of the MCPCB such that optical coupling between neighboring chips were minimized for improving the photon extraction efficiency. LED chips were directly attached on the MCPCB by using the COB (Chip On Board) scheme.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1560-1569
• /
• 2022

Liquid fueled molten salt reactors (MSRs) have seen renewed interest because of their inherent safety features, higher thermal efficiency and potential for efficient thorium utilisation for power generation. Thorium fluoride is one of the salts used in liquid fueled MSRs employing Th-U cycle. In the present study, ThF₄ was prepared by hydro-fluorination of ThO₂ using anhydrous HF gas. Process parameters viz. bed depth, hydrofluorination time and hydrofluorination temperature, were optimized for the preparation of ThF₄ in a static bed reactor setup. The products were characterized with X-Ray diffraction and experimental conditions for complete conversion to ThF₄ were established which also corroborated with the yield values. Hydrofluorination of ThO₂ at 450 ℃ for half an hour at a bed depth of 6 mm gave the best result, with a yield of about 99.36% ThF₄. No unconverted oxide or any other impurity was observed. Rietveld refinement was performed on the XRD data of this ThF₄, and Chi2 value of 3.54 indicated good agreement between observed and calculated profiles.

• 한국식품과학회지
• /
• 제32권1호
• /
• pp.117-124
• /
• 2000

인삼 성분의 열불안정성과 실용성을 고려하여 상압 조건에서 마이크로웨이브 추출실험을 실시하면서 반응 표면분석에 의해 추출조건의 최적화 및 추출특성을 모니터링하였다. 가용성 성분의 수율은 에탄올 농도가 낮고 microwave power가 높을수록, 조사포닌 함량은 에탄올 농도가 높을수록 증가하였다. 그리고 추출물의 가용성성분 함량, 조사포닌 함량, 페놀성화합물 함량, 전자공여작용 등의 추출물 특성을 모두 만족시키는 최적 추출조건을 예측하여 보았을 때, 에탄올 농도 $54{\sim}60%$ 범위, microwave power $41{\sim}90$ W 범위, 추출 시간 4분 이내로 나타났다. 예측회귀식의 신뢰성을 확인하기 위하여 예측된 추출조건의 임의의 최적점에서 실제 추출실험을 실시해 본 결과, 각 반응변수들의 예측값은 실제값과 유사하였다.

• Journal of Information Display
• /
• 제10권3호
• /
• pp.97-100
• /
• 2009

A backlight unit for a 42-inch LCD TV was manufactured with red, green, and blue LED lamps. The luminous and light extraction efficiencies of the LED lamps were increased by improving their light reflection structures and thermal properties. The blue, green, and red LED lamps showed different luminous efficiencies as a function of the input current. Compared to the conventional red LED lamp, however, the developed red LED lamp showed very high luminous efficiency in a low drive current. Taking these luminous efficiencies into account, the fabricated backlight unit showed high energy efficiency, low power consumption, and a wide color gamut.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.81-87
• /
• 2018

In this paper, in order to maximize the input process efficiency of the building energy simulation field, the authors developed the automatic extraction module of spatial information based BIM geometry information. Existing research or software extracts geometry information based on object information, but it can not be used in the field of energy simulation because it is inconsistent with the geometry information of the object constituting the thermal zone of the actual building model. Especially, IFC-based geometry information extraction module is needed to link with other architectural fields from the viewpoint of reuse of building information. The study method is as follows. (1) Grasp the category and attribute information to be extracted for energy simulation and Analyze the IFC structure based on spatial information (2) Design the algorithm for extracting and reprocessing information for energy simulation from IFC file (use programming language Phython) (3) Develop the module that generates a geometry information database based on spatial information using reprocessed information (4) Verify the accuracy of the development module. In this paper, the reprocessed information can be directly used for energy simulation and it can be widely used regardless of the kind of energy simulation software because it is provided in database format. Therefore, it is expected that the energy simulation process efficiency in actual practice can be maximized.

• 한국광학회지
• /
• 제19권5호
• /
• pp.381-385
• /
• 2008

InGaN/Sapphire LED에서 기판 제거와 패키지 방식이 광출력 특성에 미치는 영향을 분석하였다. Sapphire 기판의 제거는 반도체 접합에서 발생된 열의 방출에 도움이 되지만, 반대로 광추출효율이 손상되는 문제점이 수반된다. Sapphire 기판이 제거된 칩을 열전도율이 좋은 금속의 마운트 위에 부착하면, 최대 구동전류는 현저히 증가하고 광출력도 상당히 증가됨으로써, 광추출효율이 손상되는 문제점이 어느 정도 보상된다. 하지만, sapphire 기판이 제거된 칩을 상대적으로 열전도율이 낮은 유전체의 마운트 위에 부착하는 경우에는, 거의 모든 입력전류 범위에서 sapphire 기판이 남아 있는 일반형 칩보다 낮은 광출력을 나타낸다. 따라서, 작은 광출력이 요구되는 응용분야에서는 사용된 칩 마운트의 종류에 무관하게, 일반형 칩이 sapphire 기판이 제거된 칩 보다 유리한 것으로 분석된다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.191-194
• /
• 2011

Low-grade waste heat has generally been discarded in industry due to lack of efficient recovery methods. In recent years, organic Rankine cycle(ORC) has become a field of intense research and appears as a promising technology for conversion of heat into useful work of electricity. In this work thermodynamic performance of ORC with superheating of vapor is comparatively assessed for various working fluids. Special attention is paid to the effects of system parameters such as the evaporating temperature on the characteristics of the system such as maximum possible work extraction from the given source, volumetric flow rate per 1 kW of net work and quality of the working fluid at turbine exit as well as thermal efficiency.