• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.269-275
• /
• 2003

A non-thermal plasma process combined with $Cr_2O_3/TiO_2$ catalyst was applied to the decomposition of trichloroethylene (TCE). A dielectric barrier discharge reactor operated with AC high voltage was used as the non-thermal plasma reactor. The effects of reaction temperature and input power on the decomposition of TCE and the formation of byproducts including HCl, $Cl_2$, CO, NO, $NO_2$ and $O_3$ were examined. At an identical input power, the increase in the reaction temperature from 373 K to 473 K decreased the decomposition of TCE in the plasma reactor. The presence of the catalyst downstream the plasma reactor not only enhanced the decomposition of TCE but also affected the distribution of byproducts, significantly. However, synergistic effect as a result of the combination of non-thermal plasma with catalyst was not observed, i.e., the TCE decomposition efficiency in this plasma-catalyst combination system was almost similar to the sum of those obtained with each process.

• 신재생에너지
• /
• 제17권2호
• /
• pp.40-49
• /
• 2021

This paper explains the development process of methane decomposition to hydrogen and carbon black using solar thermal energy. It also demonstrates the advantages and disadvantages of five different reactors for each development stage, including the reactor's experimental results. Starting with the initial direct heating type reactor, the indirect heating type reactor was developed through five modifications. The 40-kWth solar furnace installed at the Korea Institute of Energy Research was used for the experiment. In the experiment using the developed indirect heating reactor, an 89.0% methane to hydrogen conversion rate was achieved at a methane flow rate of 40 L/min, obtained at about twice the flow rate compared to previous advanced studies.

• 한국수소및신에너지학회논문집
• /
• 제13권2호
• /
• pp.101-109
• /
• 2002

This work was focused on the thermal decomposition of methane into hydrogen and carbon black without emitting carbon dioxide. Extensive experimental investigation on the thermal decomposition of methane has been carried out using a continuous flow reaction system with tubular reactor. The experiments were conducted at the atmospheric pressure condition in the wide range of temperature ($950-1150^{\circ}C$) and flow rate (250 - 1500 ml/min) in order to study their dependency on hydrogen yield. During the experiments the carbon black was successfully recovered as an useful product. Undesirable pyrocarbon was also formed as solid film, which was deposited on the inside surface of tubular reactor. The film of pyrocarbon in the reactor wall became thicker and thicker, finally blocking the reactor. The design of an efficient reactor which can effectively suppress the formation of pyrocarbon was thought to be one of the most important subjects in the thermal cracking of methane.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2835-2843
• /
• 2023

After an emergency shutdown of a lead-bismuth fast reactor, thermal stratification occurs in the upper Plenum, which negatively impacts the integrity of the reactor structure and the residual heat removal capacity of natural circulation flow. The research on thermal stratification of reactors has mainly been conducted using an experimental method, a system program, and computational fluid dynamics (CFD). However, the equipment required for the experimental method is expensive, accuracy of the system program is unpredictable, and resources and time required for the CFD approach are extensive. To overcome the defects of thermal stratification analysis, a high-precision full-order thermal stratification model based on CFD technology is prepared in this study. Furthermore, a reduced-order model has been developed by combining proper orthogonal decomposition (POD) with Galerkin projection. A comparative analysis of thermal stratification with the proposed full-order model reveals that the reduced-order thermal stratification model can well simulate the temperature distribution in the upper plenum and rapidly elucidate the thermal stratification interface characteristics during the lead-bismuth fast reactor accident. Overall, this study provides an analytical tool for determining the thermal stratification mechanism and reducing thermal stratification.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.273-280
• /
• 2002

Thermal decomposition of the copolymer of butyl methacylate(BMA) with styrene(St) was investigated. The copolymer Was obtained at 80 $^{\circ}C$ in a continuous stirred tank reactor(CSTR) using toluene and benzoyl peroxide(BPO), as solvent and initiator, respectively. The reactor volume was 0.3 liters and residence time was 3 hours. The thermal decomposition followed the second order kinetics for BMA/St copolymer. The activation energies of thermal decompositon were in the ranges of 38 ${\sim}43$ kcal/mol for BMA with St copolymer and a good additivity rule was observed with the composition of copolymer. The thermogravimetric trace curve agreed well with the theoretical calculation.

• 신재생에너지
• /
• 제17권1호
• /
• pp.40-49
• /
• 2021

In this study, the optical properties, heat transfer capabilities and chemical reaction performance of a methane thermal decomposition reactor using solar heat as a heat source were numerically analyzed on the basis of the cavity shape. The optical properties were analyzed using TracePro, a Monte Carlo ray tracing-based program, and the heat transfer analysis was performed using Fluent, a CFD program. An indirect heating tubular reactor was rotated at a constant speed to prevent damage by the heat source in the solar furnace. The inside of the reactor was filled with a porous catalyst for methane decomposition, and the outside was insulated to reduce heat loss. The performance of the reactor, based on cavity shape, was calculated when solar heat was concentrated on the reactor surface and methane was supplied into the reactor in an environment with a solar irradiance of 700 W/㎡, a wind speed of 1 m/s, and an outdoor temperature of 25℃. Thus, it was confirmed that the heat loss of the full-cavity model decreased to 13% and the methane conversion rate increased by 33.5% when compared to the semi-cavity model.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.142-149
• /
• 2008

본 논문은 비열평형 플라즈마와 촉매를 이용하여 트리클로로에틸렌의 효과적인 분해방법을 제안하였다. 이를 위하여 이산화망간과 알루미나 펠렛을 플라즈마 리액터 내부에 충진한 리액터를 설계하였다. 이산화망간 충진 리백터를 이용할 경우에는 산소를 포함한 가스중의 방전에 의해 발생된 오존이 촉매 표면에서 분해되는 동안에 발생된 산소원자 라디칼에 의하여 TCE의 분해율이 향상됨을 알 수 있었다. 그리고 알루미나를 충진한 경우에는 TCE DCAC로 산화되었으며, COx 및 $Cl_2$와 같은 저분자상으로 많이 분해되지 않았다. 그러나 알루미나 충진 리액터에 의한 플라즈마 처리된 가스를 리액터 후단에 설치한 이산화망간 촉매를 통과시킴에 의하여 분해율이 매우 향상됨을 알 수 있었다. 따라서, 플라즈마 프로세스에 이산화망간을 응용함에 의하여 오존 분해에 따른 촉매 표면의 산소원자 라디칼에 의하여 TCE 및 분해 생성물(DCAC)를 효율적으로 분해하는 것이 가능하다.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.343-347
• /
• 2012

충전형 저온 플라즈마 반응기 내에서의 가스 상 시안화합물의 분해특성을 반응기로 투입되는 방전 전력, 시안화합물의 유입농도, 운반기체인 공기의 습도 및 반응기 내의 충전물질 등을 변수로 연구하였다. 저온플라즈마 방전의 경우 시안화합물들의 분해는 트리클로로에틸렌에 비하여 상대적으로 매우 낮은 효율을 보였다. 그러나 플라즈마 방전 영역에 알루미나 또는 백금/알루미나 구슬을 충전한 경우 분해효율이 크게 높아졌으며 이는 플라즈마 반응과 더불어 백금/알루미나의 촉매작용에 의한 촉매 반응이 동시에 작용함에 기인한 것으로 판단된다.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.27-37
• /
• 2017

In this study, an artificial solar simulator composed of a 2.5 kW Xe-Arc lamp and mirror reflector was used to carry out the solar thermal two step thermochemical water decomposition cycle which can produce high efficiency continuous hydrogen production. Through various operating conditions, the change of hydrogen production due to the possibility of a dual-zone reactor and heat recovery were experimentally analyzed. Based on the reaction temperature of Thermal-Reduction step and Water-Decomposition step at $1,400^{\circ}C$ and $1,000^{\circ}C$ respectively, the hydrogen production decreased by 23.2% under the power off condition, and as a result of experiments using heat recovery technology, the hydrogen production increased by 33.8%. Therefore, when a thermochemical two-step water decomposition cycle is conducted using a dual-zone reactor with heat recovery, it is expected that the cycle can be operated twice over a certain period of time and the hydrogen production amount is increased by at least 53.5% compared to a single reactor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.912-916
• /
• 2002

In this paper, the $CF_4$ decomposition rate and by-product were investigated for a simulated two plasma reactors which are metal particle reactor and spiral wire reactor as function of mixed gases. The $CF_4$ decomposition rate by plasma reactor with metal particle electrode had a gain of 20~25[%] over that by plasma reactor with spiral wire electrode. The $CF_4$ decomposition efficiency increases with increasing applied voltage up to the critical voltage for spark formation. The $CF_4$ decomposition efficiency of metal particle reactor was about 80[%] at AC 24[kV]. The $CF_4$ decomposition rate used $Ar-N_2$ as base gas was the highest among three base gases of $N_2$, $Ar-N_2$, air. The by-products of the $N_2$, $Ar-N_2$ base as were similar, but in case of air base they were different.