• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1202-1215
• /
• 1996

In this study, in order to achieve the uniformity of mechanical properties and microstructures of a hot-rolled coil in the transversal direction, the edge mask device is newly device is newly developed and installed at the upper laminar-flow cooling head in the run out table, which controls the transversal temperature of strip with enco panel and bar edge heater. The device that is transversally movable prevents the temperature drop of strip edge by blocking the cooling water into the strip edge. So, the pattern of edge mask set-up condition of the device was derived by analyzing the characteristics of strip temperature and mechanical properties according to the on-line application of edge mask.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.1
• /
• pp.40-46
• /
• 2023

Controlled nitriding is a technology that controls the nitriding potential based on the gas partial pressure received through an IOT-based sensor. Controlled nitriding is characterized by easy control of the phase of the nitride compound and excellent reproducibility of quality. In particular, it is possible to form a compound layer of excellent quality with fewer pores on the surface. However, despite these advantages, the application of controlled nitriding still needs to be improved in Korea. This paper explains the characteristics of controlled nitriding and describes the future direction and the problems of controlled nitriding in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.52-60
• /
• 2003

The physical properties of small hardwood and softwood specimens treated with liquid ammonia were investigated. The specimens treated for 4 or 18 hours were compared with the controls. The EMCs of the liquid ammonia treated specimens were higher than those of the controls when conditioned at the same humidities. However once oven-dried they didn't show any significant differences in EMCs. With the increase of liquid ammonia treatment time specimens shrank in radial and tangential directions, but not in longitudinal direction. As liquid ammonia treatment time increased the ultrasonic velocities of specimens decreased and their densities increased, thus their dynamic MOEs decreased. For chestnut specimens the presteamed were more plasticized than the liquid ammonia treated. Incising on the surfaces of specimens didn't improve liquid ammonia permeability in both hardwoods and softwoods. Liquid ammonia treatment was very effective for plasticizing 5 mm thick softwoods. Relative dielectric constants and thermal conductivities were measured with both liquid ammonia treated and control specimens.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.1
• /
• pp.11-18
• /
• 2006

Man has always striven to create a thermally comfortable environment. This is reflected in building traditions around the world - from ancient history to present day. Today, creating a thermally comfortable environment is still one of the most important parameters to be considered when designing buildings. It is defined in the ISO 7730 standard as being "That condition of mind which expresses satisfaction with the thermal environment". A definition most people can agree on, but also a definition is not easily converted into physical parameters. Thermal comfort is a matter of many physical parameters, and not just one, as for example the air temperature that is set by air-conditioner. The most important matter Today's common offices and homes are only depending on air-conditioning as a cooling system during the summer. This kind of system tends to be focused on the person who controls it and those who are around the air-conditioner while thermal-comfort is neglected. Futhermore, the people's body conditions are not considered during each time that beginning, middle, last of the air-conditioning which causing displeasure of the residents more and more. This kind of operating system is set for a long time may causes unbalanced air condition and man's psychologic displeasure goes to increase.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.253-258
• /
• 2012

The characteristics of $Al_2TiO_5$ ceramics were influenced by the additives and the heat treatment that controls the microcrack behavior at grain boundaries. The effect of additives on $Al_2TiO_5$ ceramics were investigated in terms of mechanical properties and thermal expansion at high temperature. The $Al_2TiO_5$ were synthesized at $1500^{\circ}C$, $1550^{\circ}C$ and $1600^{\circ}C$ for 2h by reaction sintering. The formation of $Al_2TiO_5$ phase was increased by additives that enhanced the volume of the microcrack that can lead to low thermal expansion. The mechanical properties of the stabilized $Al_2TiO_5$ ceramics were increased remarkably at $1100^{\circ}C$, $1200^{\circ}C$ and $1300^{\circ}C$ due to the oneset of mechanical healing of grain-bondary microcracks at a high temperature. The amount of microcrack was decreased at lower sintering temperature that causes the increase of mechanical properties at high temperature.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.179-186
• /
• 2020

The purpose of this study was to investigate the effects on the bio signal of brain waves and pulse waves using acupressure thermal bed combined with acupressure and thermal therapy. Forty healthy adults were divided into 20 experimental groups using combinatorial stimulation beds and 20 non-irritating controls. As a result of the experiment, the EEG was significantly increased in the delta wave and theta wave in the experimental group, and the alpha wave and beta wave decreased significantly. The pulse wave increased the parasympathetic activity index in the experimental group and the heart rate decreased. There was no difference in the control group. This change in EEG can be seen as a combination stimulation bed having a sleep-inducing effect, and a change in pulse wave can seen as having a relaxing effect. This study is expected to be used as basic data for the development of various combination stimulators and functional bed products.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.341-352
• /
• 2024

This study investigates the heat and mass transfer characteristics of a MoS₂ nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS₂ nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS₂ nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS₂-C₂H₆O₂ nanofluids can potentially optimize temperature distribution and fluid dynamics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.471-474
• /
• 1994

Five experimental groups with five adult male rats in each, were exposed to 20, 35, 40 and $45^{\circ}C$ air temperature for 50-70 minutes, and to $50^{\circ}C$ for 30-50 minutes, respectively. Food and drinking water were not permitted during the exposure. Blood samples were obtained by heart puncture immediately after the thermal treatment. All the rats were hyperthermic (p<0.01) as compared to the controls ($20^{\circ}C$). Hyperthermia was associated with hypoglycemia which was significant (p<0.01) at 45 and $50^{\circ}C$ exposures. Plasma levels of GOT and GPT declined at 35 and $40^{\circ}C$ reaching the lowest (p<0.05) level at $45^{\circ}C$, while at $50^{\circ}C$ GOT level was elevated by 45% but GPT was normal as compared to the controls. Differences between groups were significant (p<0.01) for GOT and insignificant for GPT. Hematocrit value increased significantly (p<0.01) at 45 and $50^{\circ}C$, indicating hemoconcentration. It could be concluded that severe heat stress (45 and $50^{\circ}C$) resulted in critical hyperthermia, hypoglycemia, disturbed liver function, body dehydration, and hemoconcentration leading to death.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.105-110
• /
• 2015

Purpose: This study aimed at finding the optimal input variables of the artificial neural network-based predictive model for the optimal controls of the indoor temperature environment. By applying the optimal input variables to the predictive model, the required time for restoring the current indoor temperature during the setback period to the normal setpoint temperature can be more precisely calculated for the cooling season. The precise prediction results will support the advanced operation of the cooling system to condition the indoor temperature comfortably in a more energy-efficient manner. Method: Two major steps employing the numerical computer simulation method were conducted for developing an ANN model and finding the optimal input variables. In the first process, the initial ANN model was intuitively determined to have input neurons that seemed to have a relationship with the output neuron. The second process was conducted for finding the statistical relationship between the initial input variables and output variable. Result: Based on the statistical analysis, the optimal input variables were determined.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.988-994
• /
• 2008

The purpose of the investigation was to establish how the pineal-adrenal axis plays an important role in thermoregulation in female goats under short-term heat stress. The study was conducted to observe the influence of glucocorticoids on pineal function in goats and its influence on stress alleviation capability. Melatonin and glucocorticoid secretions and several other endocrine and biochemical blood parameters reflecting the animals well being were determined over a one week period after goats had been exposed to $40^{\circ}C$ and 60% relative humidity for 10 days. Six female goats were used in the study. These animals served as self controls prior to the start of the experiment. The study was conducted for a period of seventeen days in a psychrometric chamber at $40^{\circ}C$ and 60% relative humidity. Chemical pinealectomy was achieved using propranolol followed by exogenous hydrocortisone treatment. Blood samples were drawn twice daily after each treatment to find the effect of hydrocortisone on plasma glucose, total protein, total cholesterol, cortisol, insulin, aldosterone, melatonin and corticosterone. Chemical pinealectomy significantly ($p{\leq}0.05$) affected plasma levels of the parameters studied and these could be significantly ($p{\leq}0.05$) counteracted by administration of hydrocortisone. Chemical pinealectomy aggravated thermal stress, although administration of hydrocortisone could ameliorate the condition. This indicated a role of the pineal in support of thermoregulation. The study establishes the modulating effect of glucocorticoids on pineal activity to relieve thermal stress in goats.