• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.43-46
• /
• 2007

To find out the optimum design of hydrogen storage and supply tank using Metal Hydride (briefly MH) and to make clear the performance characteristics under various conditions are our research purpose. In order to use the low-temperature exhaust heat, $LaNi_{4.7}Al_{0.3}$ which operates under the low pressure of 1MPa is chosen, and we measure the basic properties, namely density, specific heat, PCT(Pressure-Concentration-Temperature) characteristic, and effective thermal conductivity. Then, a numerical calculation model of hydrogen storage using MH alloy is suggested and this thermal diffusion equation of model is solved by the backward difference method. This calculation results rate compared with the experimental results of the systems which installed 1kg MH alloy and, it is found out that our calculation model can well predict the experimental results. By the experimental using MH alloy, it is recognized that the hydrogen flow rate can control by the step adjustment of brine temperature.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.199-212
• /
• 2008

A small-break loss of coolant accident (SB-LOCA) test with a break size equivalent to a 3-inch cold leg break of the APR1400 was carried out as the first transient integral effect test using the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation). This was the first integral effect test to investigate the integral performance of the test facility and to verify its simulation capability for one of the design-basis accidents. Reasonably good thermal hydraulic data was obtained so that an integral performance of the fluid sub-systems was identified and control performance of the ATLAS was confirmed under real thermal hydraulic conditions. Based on the measured data, a post-test calculation was carried out using the best-estimate thermal hydraulic safety analysis code, MARS 3.1, and the similarity between the expected and actual data was investigated. On the whole, the post-test calculation reasonably predicts the major thermal hydraulic parameters measured during the SB-LOCA test. The obtained data will be used to enhance the simulation capability of the ATLAS and to improve an input model of the ATLAS for simulation of other target scenarios.

• 한국주조공학회지
• /
• 제43권4호
• /
• pp.194-200
• /
• 2023

주조공정에서 주형의 열전달은 주형을 균일한 등방성 재료로 간주하여 계산해 왔지만 실제로 주형은 균일한 등방성 재료가 아니어서 유사한 근사값으로 계산을 행하였으며, 특히 다짐성, 바인더 첨가량등을 고려할 시에는 추정치를 사용하고 있었다. 본 연구에서는 사형 주형의 입자 구조의 관계의 열물성치를 계산하는 연구를 진행하고, 열물성치를 계산할 수 있는 기술을 개발하였다. 입자가 균일한 경우에서 열저항 모델에 근거한 열전도도 및 비열을 계산하는 알고리즘을 개발하고, 이를 모래 크기분포가 있는 사형 주형에 적용하였다. 모래는 인공사를 대상으로 하여 열물성치를 계산하였으며, 실험치와 비교하여 비교적 근사한 값을 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.129-134
• /
• 2001

It is essential to predict the welding deformation at assembly stage, to increase productivity through mechanization and automation effectively. A practical analysis method appled for production engineering was proposed to simulate the deformation of arc welding, with an analytical model using finite element method solving thermal-elastic-plastic behavior. In this research, for accurate assembling, 3-D thermal-elastic-plastic finite element model is used to simulate the out-of-plane deformation caused by arc welding. Efforts have been made to find out the efficient method to improve the reliability and accuracy of the numerical calculation. Each of theories of small and large deformation is applied in solving 3-D thermal-elastic-plastic problem to compare with their efficiency about calculation imes and solution accuracy. When solid elements are used in a bending problem of a plate, phenomenon that the predictive deformation is more than that of actual survey is observed. To prevent this phenomenon, reduced integration method for element is employed instead of full integration that is generally used in 3-D thermal-elastic-plastic analysis.

• Journal of Information Processing Systems
• /
• 제15권2호
• /
• pp.331-343
• /
• 2019

Dynamic thermal rating of the overhead transmission lines is affected by many uncertain factors. The ambient temperature, wind speed and wind direction are the main sources of uncertainty. Measurement uncertainty is an important parameter to evaluate the reliability of measurement results. This paper presents the uncertainty analysis based on Monte Carlo. On the basis of establishing the mathematical model and setting the probability density function of the input parameter value, the probability density function of the output value is determined by probability distribution random sampling. Through the calculation and analysis of the transient thermal balance equation and the steady- state thermal balance equation, the steady-state current carrying capacity, the transient current carrying capacity, the standard uncertainty and the probability distribution of the minimum and maximum values of the conductor under 95% confidence interval are obtained. The simulation results indicate that Monte Carlo method can decrease the computational complexity, speed up the calculation, and increase the validity and reliability of the uncertainty evaluation.

• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.35-43
• /
• 1988

Welding residual stresses were calculated by two dimensional thermal elasto-plastic analysis using element method. Complicated plastic behavior during heat transfer was simulated with time. Fist, temperature distributions. To consider time varying behavior of material properties and loading and unloading processes, iterative calculation based on initial stiffness method was carried out. The method proposed by Yamata was used in time increment control which determined the accuracy of claculation. comparison with other caculated and experimental results shows fairly good agreement.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2007

1997년 교토 기후협약이 체결되었고, 우리나라도 2013 년부터 기후협약 규제가 거의 확실시 되고 있다. 화석 연료의 연소로 대부분의 전력 을 생산하는 발전 산업은 우리나라 CO2 배출량의 25%를 차지하고 있으며, 발전소의 전력 생산에 따른 CO2배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 발전소의 시험data 와 IPCC (Intergovernmental Panel on Climate Change)의 온실가스 추계방법론을 이용하여 시간당 CO2 대기 배출량을 계산하는 방법을 제시한다. 발전출력에 대한 CO2 배출량을 계산하는 한 예를 도시하였다.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.631-637
• /
• 1999

The module LEAPR of NJOY data processing system has been improved to have the capability of computing the thermal elastic scattering cross sections for silicon, which has a diamond-like structure. Silicon lattice was assumed as an fcc lattice with two atoms at each lattice point. The calculation formulas for thermal neutron elastic scattering by silicon were introduced and incorporated into LEAPR, and then the scattering cross sections for silicon were computed. The results were compared with experimental data, and they were found to give a good agreement with experimental data.

• 지질공학
• /
• 제11권3호
• /
• pp.269-278
• /
• 2001

MD 시뮬레이션을 이용하여 $\alpha$-quartz, 백운모, 조장석의 열팽창계수를 산정하였다. MD 시뮬레이션에서 가장 중요한 포텐셜 함수로는 부분이온성 두입자간 포텐셜을 이용하였다. 열팽창계수는 격자구조의 온도에 따라 변화를 NPT-ensemble 시뮬레이션을 통하여 계산하여 산정하였으며 그 결과를 실험결과와 비교하였다. 시뮬레이션을 통하여 산정된 열팽창계수는 시험결과와 잘 일치하고 있으며, 유효한 수준의 결과를 보이고 있다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.473-478
• /
• 2004

This work presents the Thermal Hydraulic analysis has been performed for a 19-pin wire-spacer fuel assembly using three-dimensional Reynolds-averaged Navier-Stokes equations. SST model is used as a turbulence closure. The whole fuel assembly has been analyzed for one period of the wire-spacer using periodic boundary condition at inlet and outlet of the calculation domain. The overall results far a preliminary calculation show a good agreement with the experimental observations. It has been found that the major unidirectional flows are the axial velocity in sub-channels and the peripheral sweeping flows and the velocities are found to be following a cyclic path of period equal to the wire-wrap pitch. The temperature is found to be maximum in the central region and also, there exist a radial temperature gradient between the fuel rods. The major advantage of performing this kind of analysis is the prediction of thermal-hydraulic behavior of a fuel assembly with much ease.