• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.122-130
• /
• 2003

Li/S 이차전지의 유황양극의 전기전도도를 향상시키고 유황이 충방전시 전해질내로 용출되는 것을 방지하기 위하여 multi-walled carbon nanotubes (MWNTs)를 thermal CVD 방법으로 제조하여 유황양극에 첨가하였다. 실험결과 첫 사이클에서 Li/S 이차전지의 방전용량은 485mAh/g-sulfur이었고, MWNT 첨가 이후에 유황양극의 cycle life와 rate-capability가 향상되는 것을 관찰할 수 있었다. 그러므로 MWNT는 polysulfide를 유황양극에 흡착시키는 동시에 good electric conductor로서 작용한다는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.515-515
• /
• 2007

$LiCoO_2$ powder was synthesized by Sol-Gel method using inorganic materials. The starting materials, $CH_3COOLi^*2H_2O\;and\;Co(CH_3COO)_2{^*}4H_2O$, were mixed in the atomic ratio Li/Co of 1 and dissolved in i-propanol with acetic acid. The solution was dried for gelation, and finally obtained the pre-powder. The pre-powder were studied by thermal analysis. Based on the TGA result, heat treatment was performed at various temperature(500 to $800^{\circ}C$) for 2h in air atmosphere. The crystal structure, morphology, electrochemical property were carried out using XRD, SEM, cyclic voltammetry(CV).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.159-162
• /
• 1999

All solid state thin film micro-batteries consisting of lithium metal anode, an amorphous LiPON electrolyte and cathode of vanadium oxide have been fabricated and characterized, which were fabricated with cell structure of Li/LiPON/V$_2$O$\sub$5/Pt. The vanadium oxide thin films were formed by d.c. reactive sputtering on Pt current collector. After deposition of vanadium oxide films, in-situ growths of lithium phosphorus oxynitride film were conducted by r.f. sputtering of Li$_3$PO$_4$ target in mixture gas of N$_2$ and O$_2$. The pure metal lithium film was deposited by thermal evaporation on thin film LiPON electrolyte. The cell capacity was about 45${\mu}$Ah/$\textrm{cm}^2$ $\mu\textrm{m}$ after 200 cycle. No appreciable degradation of the cell capacity could be observed after 50 cycles .

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.334-335
• /
• 2005

Ternary tellurite glassy systems ($Li_2O-V_2O_5-P_2O_5$) have been synthesised using Vanadium oxide as a network former and Lithium oxide as network modifier. The addition of a metal? oxide makes them electric or mixed electric-ionic conductors, which are of potential interest as cathode' materials for solid-state batteries. This glass-ceramics crystallized from the $Li_2O-V_2O_5-P_2O_5$ system are particularly interesting, because they exhibit high conductivity (up to $5.95\times10^{-4}$ S/cm) at room temperature. the glass samples were prepared by quenching the melt on the copper plate and the glass-ceramics were heat-treated at crystallizing temperature determined from differential thermal analysis (DTA). The electric D.C conductivity result have been analyzed in terms of a small polaron-hopping model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.842-844
• /
• 2004

Ternary tellurite glassy systems $(CuO-V_2O_5-TeO_2)$ have been synthesised using tellurium oxide as a network former and copper oxide as network modifier. The addition of a transition-matal oxide makes them electric or mixed electric-ionic conductors, which are of potential interest as cathode materials for solid-state batteries. This glass-ceramics crystallized from the $CuO-V_2O_5-TeO_2$ system are particularly interesting, because they exhibit high conductivity ( up to $6.03{\times}10^{-3}S/cm$) at room temperature. the glass samples were prepared by quenching the melt on the copper plate and the glass-ceramics were heat-treated at crystallizing temperature determined from differential thermal analysis (DTA). The electric D.C conductivity result have been analyzed in terms of a small polaron-hopping model.

• 전기화학회지
• /
• 제22권4호
• /
• pp.164-171
• /
• 2019

Nano-sized $SnO_2$ powders were synthesized via a solvent thermal reaction using $SnClO_4$, NaOH, and ethylene glycol at $150^{\circ}C$. TGA, SEM, FT-IR, XRD, and Potentiostat/Galvanostat were employed to investigate the chemical and electrochemical characteristics of the synthesized $SnO_2$. The structure of $SnO_2$ was amorphous, and when heat treated at $500^{\circ}C$, it was transformed into a crystalline structure. The morphology obtained by SEM micrographs of the as-synthesized $SnO_2$ showed powder features that had diameters ranging 100 to 200 nm. The electrochemical performance of the crystalline $SnO_2$ as a Li-air battery cathode was better than that of the amorphous $SnO_2$. The specific capacity of the crystalline $SnO_2$ was at least 350 mAh/g at 10 mA/g discharge rate. However, there was some capacity loss of all the cells during the consecutive cycles. Keywords : Lithium-Air Battery.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.150-163
• /
• 2021

Interest in eco-friendly materials with high efficiencies is increasing significantly as science and technology undergo a paradigm shift toward environment-friendly and sustainable development. MXenes, a class of two-dimensional inorganic compounds, are generally defined as transition metal carbides or nitrides composed of few-atoms-thick layers with functional groups. Recently MXenes, because of their desirable electrical, thermal, and mechanical properties that emerge from conductive layered structures with tunable surface terminations, have garnered significant attention as promising candidates for energy storage applications (e.g., supercapacitors and electrode materials for Li-ion batteries), water purification, and gas sensors. In this review, we introduce MXenes and describe their properties and research trends by classifying them into two main categories: transition metal carbides and nitrides, including Ti-based MXenes, Mo-based MXenes, and Nb-based MXenes.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.272-278
• /
• 2021

In this study, high nickel layered LiNi_0.8Co_0.1Mn_0.1O₂ cathode materials for lithium-ion batteries were modified by yttrium doping and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) coating. The effects of yttrium doping and PEDOT:PSS coating on the structural and electrochemical properties of the LiNi_0.8Co_0.1Mn_0.1O₂ cathode material were investigated and compared. The substitution of nickel with an electrochemically inert yttrium was confirmed to be successful in stabilizing the layered structure framework. Moreover, coating the surfaces of the LiNi_0.8Co_0.1Mn_0.1O₂ particles with a conductive polymer, PEDOT:PSS, improved the capacity retention, thermal stability, and impedance of the cathode material by increasing its ionic and electric conductivities.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.36-41
• /
• 2022

Drying process is involved in the production of various products including food, textiles, paper, pharmaceuticals, and batteries. Phase change of liquid to vapor generally requires enormous thermal energy, so in order to save energy, it is advantageous to develop an appropriate drier and use it under appropriate operating conditions, depending on the characteristics of materials. However, due to the complex, multiscale heat and mass transfer occurring during drying processes, predictions of appropriate drying conditions before actual operation are not easily achieved, leading to challenges in designing driers. Here, we developed a lab-scale experimental setup to evaluate the performance of band dries. The experimental setup was used to measure the moisture content and temperature change in the materials being dried in a belt dryer. Experimental results obtained using our lab-scale setup allow us to predict the performance of a full-scale band drier, thus suggesting a practical framework for predicting the drying process of various materials and developing band driers.

• 전기화학회지
• /
• 제20권2호
• /
• pp.27-33
• /
• 2017

매우 좋은 에너지 저장장치인 리튬이차전지의 안전성은 전기화학반응이 일어나는 "양극/분리막(전해질)/음극"의 계에서 리튬이온전지의 분리막의 물리적 충격, 고온에 따른 손상에 기인하는 바가 크며, 특히, 폭발사고에서 분리막 손상에 의한 내부단락이 큰 영향을 끼친다. 고분자로 구성된 분리막의 열 안정성을 높이기 위해 세라믹이 얇게 코팅된 세라믹코팅 분리막이 최근 사용되고 있다. 폴리에틸렌계 분리막 위에 다양한 크기(IL = 488.5 nm, I = 538.7 nm, S = 810.3 nm, D = 1533.3 nm)의 $Al_2O_3$ 입자와 styrene-butadiene rubber(SBR) / carboxymethyl cellulose(CMC) 바인더를 섞어 만든 슬러리를 코팅하여 열 안정성을 측정한 후, 이를 분리막으로 하는 삼성분계 양극과 리튬메탈 음극의 코인 셀을 제작하여, 전기화학적 특성 변화를 관찰하였다.