• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.8
• /
• pp.959-965
• /
• 1988

Zinc diffusion characteristics and its applicabilities have been studied using an open-tube system. Thermal decomposition of arsenide(As) at gallium arsenide(GaAs) wafer surface was well inhibited by using Ga: poly-GaAs: Zn compositon as a diffusion source. Junction depth was obtained as 4.6x10**7\ulcorner exp)-1.25/kT) where activation energy of diffusion was 1.25eV. From Boltzmann-matano analysis, it could be identified that concentration dependencies of Zn diffusivity well consisted with those of kick-out model. The ideality factor of p+-n junction formed by Zn diffusion was about 1.6 and infrared light intensity was linearly varied in the range of sixty folds. It is concluded frodm these results that Zn diffuses according to kick-out model, and open-tube method is applicable to compound semiconductor devices.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.441-444
• /
• 2006

The Yang Pyeong bridge is high the occurred possibility of temperature crack by means of hydration Heat when the foundation of is constructed. Therefore, a pipe-cooling method was applied for reducing the temperature crack. Using the measured temperature curve when construction was carried out, the measured value and different facts were analyzed. In this paper, cause and analysis with respect to a mentioned above is to discuss firstly, and thermal characteristics of concrete and construction method hereafter is also discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.313-319
• /
• 2010

GNSS receiver which uses the weak satellite signal is very vulnerable to the intentional jamming or non-intentional electromagnetic interference. One of the best method to overcome this disadvantage is to use an adaptive array antenna which has the capability of beamforming or nulling to the certain direction. In this paper, the performance of spatial adaptive null pattern control algorithm of 5 element array antenna is analyzed. A control algorithm which is designed in the 5 element array antenna is OPM(Output Power Minimization) which is eliminating the correlation characteristics between a reference antenna and the others. This algorithm can be applied effectively to the satellite navigation's CRPA because the satellite direction is not considered and GNSS signal power is below the thermal noise. The feature of the OPM algorithm is analyzed and the performance is compared with other null pattern control algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.322-325
• /
• 2002

In this study, noise figures of 0.3 $\mu\textrm{m}$-GaAs MESFETs are predicted experimentally with different temperatures. Both the noise figure and the gate leakage current are obtained with wide range of temperatures(27$^{\circ}C$∼300$^{\circ}C$). From the results, gate leakage current increases with temperatures. It is expected that gate leakage current contributes directly to the increase of shot noise current. It is therefore highly recommended to apply an accurate noise analysis to the design of the devices and modules at high temperatures. Fini,Uy the relation between the gate currents resulting in the increase of noise and the noise figures of submicron GaAs MESFETs are traced with different temperatures

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.753-756
• /
• 2004

최근 전자 부품으로써 널리 사용되는 압전 변압기근 고전계 구동시 야기되는 압전체의 기계적인 진동 손실 및 유전 손실에 의해 높은 온도 상승이 초래된다. 이는 압전 변압기의 동작 특성 변화를 일으키며 결국 안전 변압기의 공진 주파수의 변화 및 효율의 감소 등 비선형성의 원인이 된다. 본 논문에서는 유한 요소법을 이용한 압전 변압기의 공진 특성을 해석하였으며 이를 이용하여 압전 변압기의 기계저인 진동 손실 및 유전 손실을 계산하였다. 또한 유한 요소법을 이용한 3차원 열전달 방정식의 해석을 이용하여 암전 변압기의 온도 분포를 해석하였으며 이를 실험적으로 검증하였다.

• Journal of Environmental Science International
• /
• v.14 no.10
• /
• pp.973-978
• /
• 2005

Biodegradable oil gelling agent was prepared, and their oil absorption capacities using light oil, lubricant oil and corn oil were investigated. The result showed that the oil absorption capacity was depended on the amount of surfactant and starch added, and was increased in the order of light oil, lubricant oil and corn oil. Also, the oil-absorption capacity was saturated within 30 min at $18^{\circ}C$. The biodegradability of the prepared biodegradable oil gelling agent was also studied by determination of reduced sugar produced after enzymatic hydrolysis. Their surface morphologies and thermal properties of the prepared biodegradable oil gelling agent were observed by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), respectively.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.527-530
• /
• 2006

In the present work, characteristics of the flow in the cage of a steam turbine bypass control valve for thermal power plant are investigated. Experimental measurement for wall static pressure has been carried out to validate numerical solutions. And, the flowfield is analyzed by solving steady three-dimensional Reynolds-averaged Navier-Stokes equations. Shear stress transport (SST) model is used as turbulence closure. The effects of the flow area between stages of the cage on the pressure drop are also found.

• Journal of the Korean Society of Visualization
• /
• v.3 no.1
• /
• pp.90-96
• /
• 2005

Most of the previous studies on natural convection were based on the numerical analysis, and some experimental studies considered the classic case of thermal convection. In this study, an adiabatic square body was located at the center of an enclosure between the bottom hot and top cold walls. And the measurement of the detailed temperature fields was conducted by the method of two-color Laser Induced Fluorescence using a Nd:Yag laser. As a result, heat transfer characteristics of natural convection with an adiabatic body was estimated as a function of time over a range of Rayleigh numbers.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.104-107
• /
• 2004

Most of the previous studies on natural convection were based on the numerical analysis, and some experimental studies considered the classic case of thermal convection. In this study, an adiabatic square body was located at the center of an enclosure between the bottom hot and top cold walls. And the measurement of the detailed temperature fields was conducted by the method of two-color Laser Induced Fluorescence using a Nd:Yag laser. As a result, heat transfer characteristics of natural convection with an adiabatic body was estimated as a function of time over a range of Rayleigh numbers.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.557-560
• /
• 2002

In this study, simulation of weak shock waves are peformed by a two-dimensional thermal fluid or compressible fluid model of the lattice Boltzmann method. The shock wave represents an abrupt change in fluids properties, in which finite variations in pressure, internal energies, and density occur over the shock thickness. The characteristics of the proposed model with a simple distribution function is verified by calculation of the sound speeds, and the shock tube problem. The reflection of a weak shock wave by wedge propagating in a channel is performed. The results agree well with those by finite difference method or by experiment. In the simulation of unsteady shock wave diffraction around a sharp corner, we show a flow field of vortical structure near the comer.