• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.159-162
• /
• 2004

The processing of phenolic composite reinforced with hybrid of PAN based/Rayon based carbon fabrics using FBG sensor and thermocouple was studied. Once the composite is cured, the reflection spectrum from the FBG sensor shifted the center wavelength with an increase in the temperature. Also, the change in the form of the reflection spectrum obtained during the cooling process of the cure cycle was caused by the thermal shrinkage. During the curing process, uniform distribution of the temperature profile was observed throughout the sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2450-2452
• /
• 1999

Presently, it is now developing the optical remote gas sensor system which can measure combustible gases such as $CH_4$ and $C_2H_2$ generating by partial discharges inside the cable and connection parts to detect thermal deterioration of Oil-Filled (OF) power cable at the appropriate time. It is the most important parameter to select central wavelength of laser diode (LD) by analyzing the absorption bend of measuring gases in the infrared region. In this research, we proposed the optical spectrum analyzer to absorption band of $CH_4$ and $C_2H_2$ for the preliminary research of optical fiber gas detecting system.

• Journal of Radiation Protection and Research
• /
• 제34권2호
• /
• pp.65-68
• /
• 2009

Metal-semiconductor contact is very important for the operating property of semiconductor detector. $Cd_{0.96}$ $Zn_{0.04}$ Te semiconductor crystal was grown with Bridgman method, and the crystal was cut and polished. EPMA (Electron Probe Micro Analyzer) and ICP-MS (Inductively Coupled Plasma Mass Spectrometry) analysis were done to obtain the chemical composition and impurity of the crystal. Metal contact was deposited with thermal evaporator on both sides of the crystal. Detectors with Au/CZT/Au and In/CZT/Au structure were made, and I-V curve and the energy spectrum were measured with the detectors. It could be seen that the detector with the In/CZT/Au structure has superior property than the detector with Au/CZT/Au structure when the crystal resistivity was low. However, the metal contact structure effect becomes low when the crystal resistivity was high.

• Bulletin of the Korean Chemical Society
• /
• 제28권6호
• /
• pp.983-989
• /
• 2007

Azobenzene-cored dendrons having the photoisomerizable azobenzene core and terminal vinyl groups have been prepared. Absorption bands of azobenzene-cored dendrons are similar except more intense 280 nm band in higher generation azobenzene dendron. All three azobenzene-cored dendrons show reversible photoisomerization similar to simple azobenzene, irrespective of the generation of dendron. On 350 nm irradiation, absorption band around 344 nm decreases and 436 nm band increases. Photoisomerization reactions are very fast for all three azobenzene-cored dendron and the reaction efficiency is dependent of its generation and solvent. In the dark, slow thermal reversion to original absorption spectrum is observed.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.294-300
• /
• 1996

In hydro-generator, a groundwall insulation of stator windings gradually deteriorates due to mechanical, thermal, electrical and environmental stresses. These stresses combine to result in loose windings, delamination of the stator insulation and/or electrical tracking of the endwinding, all of which can lead to stator insulation failures. Conventionally, off-line tests such as partial discharge measurement, DC/AC current and .DELTA.tan.delta. tests has been used for estimation of winding condition. However, off-line test requires large power supply and generator outage. In addition, major cause of insulation problems such as loose wedges and slot dischages may not be found with off-line diagnoses. This paper introduces the on-line partial discharge measurement techniques using frequency spectrum analyzer(FSA) for the generator stator windings. The experimental results from the UIAM #1 hydro-generator confirms a optimistic application of on-line generator diagnosis method as a reliable tool for evaluation of winding condition.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1390-1395
• /
• 2006

본 논문에서는 FBG 필터로 구성된 DWDM용 OADM을 제안하고 그 온도 특성에 대해 연구하였다. 제안된 OADM의 온도 특성을 분석하기 위해서, OADM의 온도 응답을 구하고 수치 해석하였으며, OADM을 제작하여 그 출력 스펙트럼을 측정하였다. 그 결과로 부터 $-30^{\circ}C{\sim}90^{\circ}C$ 범위 내에서 제안된 OADM의 출력 스펙트럼 중심 파장이 약 0.01230$nm/^{\circ}C$로 변화함을 알 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.20-23
• /
• 2013

For sensitive measurements of micro-Tesla nuclear magnetic resonance (${\mu}T$-NMR) signal, a low-noise superconducting quantum interference device (SQUID) system is needed. We have fabricated a liquid He dewar for an SQUID having a large diameter for the pickup coil. The initial test of the SQUID system showed much higher low-frequency magnetic noise caused by the thermal magnetic noise of the aluminum plates used for the vapor-cooled thermal shield material. The frequency dependence of the noise spectrum showed that the noise increases with the decrease of frequency. This behavior could be explained from a two-layer model; one generating the thermal noise and the other one shielding the thermal noise by eddy-current shielding. And the eddy-current shielding effect is strongly dependent on the frequency through the skin-depth. To minimize the loop size for the fluctuating thermal noise current, we changed the thermal shield material into insulated thin Cu mesh. The magnetic noise of the SQUID system became flat down to 0.1 Hz with a white noise of 0.3 $fT/{\surd}Hz$, including the other noise contributions such as SQUID electronics and magnetically shielded room, etc, which is acceptable for low-noise ${\mu}T$-NMR experiments.

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.314-319
• /
• 2015

In this research, we focused on the development of cy3 dye with high thermal stability and good solubility for LCD color filter. Cy3 dyes were prepared through the synthetic procedure of two steps. The synthesized cy3 dyes were characterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed maximum absorption wave length (${\lambda}_{max}$) in the range of 549~555 nm in UV/Vis spectrum. And we confirmed that solubility characteristics and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with methyl counter cation and ethyl counter cation have good solubility in organic solvents such as chloroform, ethanol, and PGME. Moreover, Cy3 dye with ethyl counter cation gave excellent thermal stability in TGA thermograms. And Cy3 dye with ethyl counter cation showed good result in photoresist film test.

• Ocean and Polar Research
• /
• 제35권4호
• /
• pp.281-290
• /
• 2013

The vertical structure of sediment temperatures in the tidal flats of Geunso Bay and Seonyu Island in western Korea were measured for more than a year and analyzed. Mean temperature decreased with depth in spring and summer. On the contrary, it increased with depth in fall and winter, faithfully reflecting the seasonal variation resulting from the heating and cooling of the surface sediment. The surface sediment temperatures are shown to be strongly dependent on solar radiation, M2, and M4 tidal components. They are also weakly affected by precipitation. Thermal diffusivity of sediment is estimated at each depth and in each of the four seasons by applying the amplitude equation method. In Geunso Bay, the estimated seasonal-mean values decreased with depth, while they showed little change in Seonyu Island. Depth-averaged thermal diffusivity in Geunso Bay ($1.94 {\times}10^{-7}m^2/s$) was smaller than Seonyu Island ($2.20 {\times}10^{-7}m^2/s$). The variability of thermal diffusivity is shown to corelate with sediment composition and sorting from the grain-size analysis of intertidal sediments in Geunso Bay and Seonyu-do.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.530-533
• /
• 2017

ZnO micro/nanocrystals with different morphologies were synthesized by thermal evaporation of various zinc source materials in an air atmosphere. Zinc acetate, zinc carbonate and zinc iodide were used as the source materials. No catalysts or substrates were used in the synthesis of the ZnO crystals. The scanning electron microscope(SEM) image showed that the morphology of ZnO crystals was strongly dependent on the source materials, which suggests that source material is one of the key factors in controlling the morphology of the obtained ZnO crystals. Tetrapods, nanogranular shaped crystals, spherical particles and crayon-shaped crystals were obtained using different source materials. The X-ray diffraction(XRD) pattern revealed that the all the ZnO crystals had hexagonal wurtzite crystalline structures. An ultraviolet emission was observed in the cathodoluminescence spectrum of the ZnO crystals prepared via thermal evaporation of Zn powder. However, a strong green emission centered at around 500 nm was observed in the cathodoluminescence spectra of the ZnO crystals prepared using zinc salts as the source materials.