• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2380-2382
• /
• 1999

An Ampacity of a power cable depends on the soil thermal property, especially the soil thermal resistivity. Also, The soil thermal resistivity depends on the soil moisture contents in soil surrounding the power cable. This paper propose the prediction algorithm of the soil moisture contents using the Thornthwaite theory.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.682-685
• /
• 1996

Photothermal properties depend on the characteristics of energy transfer processes in solution. In this study, a time-resolved single beam thermal lens experiment in various solvents is employed to investigate the energy coupling effects which govern the energy transfer processes. Interestingly, it is observed that the behaviour of the photothermal propagation in solution depends on the property of solution and the concentration of solute in a single beam thermal lens configuration. These characteristics lead us to consider the solute-solvent coupling effects as well as the solvent-solvent interactions.

• 한국세라믹학회지
• /
• 제32권2호
• /
• pp.171-182
• /
• 1995

Five eucryptite and ten spodumene compositional powders were syntehsized from three sillimanite group, two kaolin group, and five pyrophyllite group silicate minerals. Those powders were isotatically pressed and fired at 1200~135$0^{\circ}C$ for 2 hrs, and then the sintered bodies were characterized. Silicate minerals with molar ratio of Al2O3 to SiO2 correspond to those of eucryptite and spodumene are kaolin and pyrophyllite group silicate minerals, respectively. Sintering characteristics of eucryptite from kaolin group and spodumene from pyrophyllite group mineral were superior to those from other silicate minerals. Eucryptite sintered bodies with 95~97% relative densities and densified microstructures can be obtained using Hadong pink kaolin as starting materials by sintering over broad temperature zone(1250~135$0^{\circ}C$). The eucryptite sintered bodies which were fired at 130$0^{\circ}C$ for 2hrs, from Hadong pink kaolin had within 3.0wt% microstructural compositional variations compaired with stoichiometric compound, and had good negative thermal expansiion property with -3.55$\times$10-6/$^{\circ}C$ thermal expansion coefficient. Spodumene sintered bodies which were prepared from pyrophyllite group silicate minerals, had dense microstructures and high densities by densification through liquid phase sintering with enlarged temperature range. The specimens which were fired at 130$0^{\circ}C$ for 2 hrs from Gusipyrophillite, had dense microstructure with crystallines mainly, and low thermal expansion property with 0.62$\times$10-6/$^{\circ}C$ thermal expansion coefficient. The porous texture and residual glass phase in LAS system ceramics which were prepared from silicate minerals, tend to increase the thermal expansion properties of sintered bodies to positive direction.

• 대한기계학회논문집A
• /
• 제37권5호
• /
• pp.657-664
• /
• 2013

에폭시 수지에 다중벽 탄소나노튜브를 첨가하여 초음파 처리와 전단혼합 방법으로 분산시켜 다중벽 탄소나노튜브로 강화된 에폭시 복합재료를 제조하였으며, 에폭시 수지 내 다중벽 탄소나노튜브의 분산 적정성을 판단하고 기계적 및 열적 물성을 고찰하였다. 충전재 분산에 대한 평가를 위해 정성적인 방법으로 주사전자현미경(scanning electron microscope, SEM) 이미지를 사용하였고, 정량적인 판단을 위해 인장실험을 실시하였다. 또한, 열적 특성을 평가하기 위해 열팽창계수(coefficient of thermal expansion, CTE)를 측정하였다. 주사전자현미경 사진 및 인장 강도와 영률(Young's modulus)의 작은 편차를 통해서 다중벽 탄소나노튜브가 에폭시 수지 내에 적절히 분산되었음을 확인하였다. 충전재 함량에 따라 인장 강도와 영률이 증가함을 보였고 열팽창계수 측정에서는 열안정성 개선을 고찰하였다.

• 한국지반환경공학회 논문집
• /
• 제11권10호
• /
• pp.15-24
• /
• 2010

지중전력선은 연성관을 다발로 지하에 매설함으로 관의 하단부 다짐효율이 낮아 파손 등과 같은 구조적 문제점에 항상 노출되어 있고 이러한 문제점을 해결하기 위해서 다양한 방법들이 강구되어 왔으며 그중 하나가 유동성이 뛰어난 저강도 콘크리트의 개발이다. 그러나 지중전력선 뒤채움재는 이러한 구조적 안정성 뿐만 아니라 전력선에서 발생하는 열을 효율적으로 외부로 배출시키는 우수한 열적 특성도 동시에 요구된다. 따라서 본 연구에서는 급결성 유동성 뒤채움재의 물리, 역학적 조건에 따른 열 저항특성을 파악하고자 한다. 국내 토질조건을 고려하여 풍화토, 자갈, 점토를 혼합한 혼합토 총 17종류의 다양한 토양에 대해서 고화재를 적용하여 물리, 역학적 특성(함수비, 단위 중량, 간극비, 양생 시간)에 따른 열저항 특성을 파악하고, 현장의 적용성을 확인하고자 실증실험을 수행하였다. 연구결과, 실제 지반조건과 유사한 17종 혼합토에 대해서 수축팽창, 양생조건을 고려한 실내실험과 현장토에 대해서 실험을 수행한 결과, 다양한 현장조건에 대해서 $85^{\circ}C\;cm/W$ 이하 열 저항성 값으로 우수한 열특성을 나타냈다.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.305-313
• /
• 2001

본 연구에서는 콘크리트 열전도율의 영향인자에 대하여 TLPP원리를 응용한 QTM-D3 장비를 이용하여 실험을 실시하였고, 이들 실험결과를 이용하여 콘크리트의 열전도율을 예측하는 모델식을 제안하였다. 본 연구를 통하여 얻은 결론은 다음과 같다. 콘크리트, 모르타르 및 페이스트의 열전도율에 미치는 주요 영향인자를 구명하기 위해 본 연구에서 선택된 실험변수는 재령, 골재 함유량, 시멘트 함유량, 결합재 종류, 잔골재율, 시편의 온도 및 함수상태로 총 7가지이다. 이중에서 골재 함유량과 함수상태가 콘크리트 열전도율의 주요 영향인자임을 알 수 있었다. 그리고 시멘트 사용량이 많은 페이스트나 모르타르의 경우 시멘트 함유량이나 결합재 종류에 의해서도 열전도율이 영향을 받고 있다. 그러나 재령은 콘크리트의 열전도율에 큰 영향을 미치지 않음을 알 수 있었다. 콘크리트 열전도율에 주요 영향인자인 골재 함유량, 잔골재율, 시편의 온도 및 함수상태를 이용하여 콘크리트의 열전도율을 계산할 수 있는 모델식을 제안하였다.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.84-97
• /
• 2017

Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.64-69
• /
• 2001

In general, laminate effective orthotropic thermal conductivities are dependent on fiber and matrix material properties, fiber volume fraction and fabric geometric parameters. This paper deals with the predicting method of the transverse and the in-plane thermal conductivities of plain weave fabric composites based on the three dimensional series-parallel thermal resistance network. Thermal resistance network was applied to unit cell model that characterizes the periodically repeated pattern of plain weave. Also, an experiment apparatus is setup to measure the thermal conductivities of composite material. The numerical and experimental results of carbon/epoxy plain weave are compared.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1258-1263
• /
• 2010

Backfill material of buried electrical transmission cable should dissipate the heat as rapidly as it is generated, or high temperatures will lead thermal runaway. These problems could raise thermal resistance and recude trasmission efficiency. So Backfill material of buried electrical transmission cable should have not only structual safty but good thermal property. So, in this study, we performed thermal resistancy test for various materials such as sand, weathered soil, clay and mixed soil to analyze the thermal characteristics of CLSM(controlled low strength materials) for water content.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.298-305
• /
• 2000

The functionally graded material (FGM) is the new concept for a heat resisting material. FGM consists of ceramics on one side and metal on the other. A composition and microstructure of an intermediate layer change continuously from ceramics to metal at the micron level. This study is carried out to analyze the thermal shock characteristics of functionally graded PSZ/ metal composites. Heat-resistant property was evaluated by gas burner heating test using $C_2H_2/O_2$ combustion flame. The ceramic surface was heated with burner flame and the bottom surface cooled with water flow. Also, the composition profile and the thickness of the graded layer were varied to study the thermo mechanical response. Furthermore, this study carried out the thermal stress analysis to investigate the thermal characteristics by the finite element method. Acoustic emission (AE) monitoring was performed to detect the microfracture process in a thermal shock test.