• 자원환경지질
• /
• 제29권6호
• /
• pp.753-765
• /
• 1996

It is a well known fact that the remanent magnetization direction of the Tertiary rocks is deflected significantly clockwise (about $50^{\circ}$) in the Tertiary basins of the southeastern part of Korean peninsula. This fact has been interpreted as an evidence of north-south spreading of the East Sea (Sea of Japan) and dextral strike-slip motion of the Yangsan fault. As deflection (rotation) of remanent magnetizations is frequently reported from various regions of the world in the vicinities of strike-slip fault, such phenomena are to be expected in the Yangsan fault region also. It was the purpose of this study to clarify whether such premise is right or not. A total of 445 independently oriented core samples were collected from Cretaceous rocks of various lithology (sedimentary rocks, andesites and I-type granites) in the Yangsan fault area. In spite of through AF and thermal demagnetization experiments, no sign of remanent magnetization deflection was found. Instead, palaeomagnetic poles calculated from formation-mean ChRM directions are very similar to those of contemporary (Barremian, and late Cretaceous-Tertiary) sedimentary and plutonic rocks in the other parts of $Ky{\check{o}}ngsang$ basin as well as those of China. Therefore, possibility of tilting of granite plutons and horizontal block rotation of study area is excluded. It is also concluded that the Yangsan fault did not take any significant role in the Cenozoic tectonic evolution of southeast Korea and the East Sea region. The boundary between rotated and unrotated region of remanent magnetization is not the Yangsan fault line, but must lie further east of it.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.28-31
• /
• 2005

To verify the feasibility of bifilar winding type superconducting fault current limiter (SFCL) using BSCCO tape, two types of magnets were fabricated and tested by short-circuit in this research. Even if the FCL using high Tc superconducting (HTS) tape has zero resistance in normal state, it needs to be wound as a bifilar winding for zero inductance. Solenoid type and pancake type bifilar winding magnets are designed and fabricated with the same length of BSCCO tape. The test system consists of AC power supply, transformer, fault switch, load and bifilar winding magnet. The applied AC voltages during fault duration, 0.1s, were from 0.5V to 20V. The test results without bifilar winding magnet were compared with those with each type magnets. The test results include voltage against magnet, transport current and generated resistance curve. Thermal stability, the recovery time, was studied from the results of two type magnets. The pancake type was the most effective to limit fault current but the solenoid type was thermally the most stable. From this research, short-circuit characteristics of the two types were obtained.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.57-61
• /
• 2015

A Superconducting Fault Current Limiter is an electric power device which limits the fault current immediately in a power grid. The SFCL must be cooled to below the critical temperature of high temperature superconductor modules. In general, they are submerged in sub-cooled liquid nitrogen for their stable thermal characteristics. To cool and maintain the target temperature and pressure of the sub-cooled liquid nitrogen, the cryogenic cooling system should be designed well with a cryocooler and coolant circulation devices. The pressure of the cryostat for the SFCL should be pressurized to suppress the generation of nitrogen bubbles in quench mode of the SFCL. In this study, we tested the performance of the cooling system for the prototype 154 kV SFCL, which consist of a Stirling cryocooler, a subcooling cryostat, a pressure builder and a main cryostat for the SFCL module, to verify the design of the cooling system and the electric performance of the SFCL. The normal operation condition of the main cryostat is 71 K and 500 kPa. This paper presents tests results of the overall cooling system.

• 한국안전학회지
• /
• 제25권2호
• /
• pp.18-23
• /
• 2010

This paper describes a cause of fire accidents on power system fire DC electric traction vehicles. We investigated fire scene of power line for DC electric traction vehicles. From analysis results, the cause of fire on power line turned out line to ground fault between a feeder of electric power services(pantagraph) and DC electric traction vehicle roof. Fire accident of DC electric traction vehicles be assumed that electric sparks had been produced between the pantagraph and the power line conductor by repetitively making contact and separation, maybe if some material like branches get in between connecting rod it makes progress line to ground fault. ZnO arresters are widely used to protect DC electric traction vehicles against overvoltages caused by lightning or switching surges. However, the arresters are deteriorated by commercial overvoltages and/or lightning one. The deteriorated arresters could lead power failures, such as line to ground fault by a thermal runaway resulting from the increases in leakage current even in a nominal power system voltage. Finally, the power failures would be causative of the fire accident.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.241-247
• /
• 2008

This paper describes a cause of fire accidents on power system for DC electric traction vehicles. We investigated fire scene of power line for DC electric traction vehicles. From analysis results, the cause of fire on power line turned out line to ground fault between a feeder of electric power services(pantagraph) and DC electric traction vehicle roof. Fire accidents of DC electric traction vehicles be assumed that electric sparks had been produced between the pantagraph and the power line conductor by repetitively making contact and separation, maybe if some material like branches get in between connecting rod it make progress line to ground fault. ZnO arresters are widely used to protect DC electric traction vehicles against overvoltages caused by lightning or switching surges. However, the arresters are deteriorated by commercial frequency overvoltages and/or lightning one. Deteriorated arresters could lead power failures, such as line to ground fault by a thermal runaway resulting from the increases in leakage current even in a nominal power system voltage. The power failures, such as line to ground fault would be causative of the fire accidents.

• 한국지리정보학회지
• /
• 제19권4호
• /
• pp.106-117
• /
• 2016

최근 환경보호와 신재생에너지 확보 일환으로 태양광발전소가 널리 보급되고 있으며, 태양광 모듈의 효율적인 관리를 위해서는 정기적인 점검이 필요하다. 본 연구에서는 UAV 기반 열적외선 카메라와 GIS 공간분석을 통해 태양광 모듈에 대한 고장여부를 진단할 수 있는 실험을 실시하였다. 먼저 고정익 UAV와 RGB 카메라를 이용하여 영상을 촬영한 후 Pix4D SW를 통해 정사영상을 생성하였으며, 정사영상 자료를 이용하여 태양광 모듈 레이어를 구축한 후 코드를 입력하였다. 또한 태양광 모듈 고장여부를 진단하기 위해 고무덮개를 태양광 모듈에 설치하였으며, 열적외선 카메라로부터 얻어진 온도 정보와 태양광 모듈 레이어를 기반으로 Zonalmean 함수를 통해 태양광 모듈별 평균온도를 계산할 수 있었다. 마지막으로 GIS 공간분석을 통해 이상 발열이 확인된 $37^{\circ}C$ 이상의 모듈을 자동으로 추출하고 각 모듈별 고유식별 코드를 식별함으로써 고무 덮개를 설치한 모듈의 위치를 정확하게 분석할 수 있었다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.595-601
• /
• 2020

10년 이상 보관된 니트로셀룰로오스 (Nitrocellulose, 니트로셀룰로오스) 재질의 화약용기 안전 검사를 진행하는 과정 중 화약이 보관되어진 용기에 균열이 발생한 것을 확인하여 고장 원인 분석 시험을 실시하였다. 고장이 발생한 데에 영향을 준 요인을 선별하기 위해 먼저 고장수목분석(Fault Tree Analysis, FTA)을 통해 고장 요인 및 원인에 대해 탐구하였으며, 보관 시 발생할 수 있는 내·외부적인 요인 및 환경에 대한 영향성을 확인한 결과 열에 의해 화학 반응이 가속화되어 발생한 화약용기의 물성 변화가 고장의 원인인 것으로 추정하였다. 이를 확인하기 위해 자연 노화된 화약용기를 이용하여 열충격시험, 양립성 시험 등의 환경시험을 수행하여 고장의 원인 분석을 수행하였으며, 가속노화시험을 통해 고장 재현 시험을 실시하였다. 이를 통해 앞선 고장수목분석 결과와 같이 열과 화약에 의해 화학 반응이 가속화되는 것을 확인할 수 있었으며, 화약용기의 물성이 변화하는 것을 확인하였다. 또한, 열 노화에 의한 수명 추정을 위해 아레니우스 모델(Arrhenius Model)을 이용하여 화약용기의 사용 수명을 추정하였다.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.85-96
• /
• 1998

The sericite ore is formed by the hydrothermal alteration of rhyodacitic welded tuff. The alteration zone of the host rock can be classified into four types based on the mineral assemblages ; sericite, quartz-sericite, silicified and propylite zone. The sericite ore mainly occurs as vein types and fault clay along the fault plane in the quartz-sericite zone. Mineral components of the sericite ore are mainly sericite with minor diaspore, corundum and pyrite. The sericitic porcelaineous ore is mainly composed of quartz and sericite. Accessory minerals are muscovite, diaspore, sphene, corundum, pyrite, iron-oxides and etc. The chemical compositions of K2O, Al2O3, and ignition loss in the sericite ore increase largely than that of the host rock, while the compositions of SiO2, Na2O and Fe2O3 decrease. XRD patterns of the heat-treated sericite ores show the formation of mullite at $1,200^{\circ}C$. and the diaspore-bearing sericite ore forms mullite and corundum at $1,200^{\circ}C$. The differential thermal analysis of the sericite ores show small endothermic peak at 645~668$^{\circ}C$. and the diaspore-bearing sericite ore shows a strong endothermic peak at $517^{\circ}C$. It indicates that the decomposition of diaspore appear at lower temperature than that of sericite. The thermal expansivity of the sericite ores show the similar pattern. The sericite ores show the thermal expansivity of 3.3~4.7% at 900$^{\circ}C$ and 0.39~0.75% at 1,20$0^{\circ}C$, respectively. DTA-TG curves of the sericite ores show closely relations with the thermal expansivity.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2002년도 춘계공동학술발표회요약집
• /
• pp.287.1-287
• /
• 2002

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.813-814
• /
• 2013