• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.285-291
• /
• 2017

본 연구에서는 무인 항공 장비에 장착되는 전자 장비에 상변화 물질을 적용한 방열 설계를 수치적으로 진행하였다. 상변화 물질에 대한 열특성 실험을 통해 용융점($T_m$), 용융시 온도 증분(${\Delta}T_m$) 및 체적 팽창을 확인하였으며, 이를 통해 해석 모델 검증을 진행하였다. 용융시 용융점에서 발생하는 온도 정체 현상을 모사하기 위해 등가 비열법으로 계산한 열 물성치를 상변화 물질의 해석 모델 물성치로 입력하였으며, 실험 결과와의 비교를 통해 해석 모델의 신뢰성을 검증하였다. 검증된 해석 모델을 통해 핀과 함께 상변화 물질이 충진된 장비 하우징의 방열 성능을 향상시키고, 이를 통해 장비의 열적 안정성을 확보하였다. 현재 상변화 물질이 충진된 하우징의 방열 성능 극대화를 위해 핀 최적 설계에 대한 추가적인 연구가 진행 중에 있다.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1757-1762
• /
• 2007

Recently, the demand for the low cost power conversion equipment is rapidly increased. To develop this three phase voltage source inverter, optimum power conversion equipment to system is designed. The optimum operation method to minimize the power loss also satisfy the life time of the power electronics that is request in the present industry. In this paper, the efficient operating method to change of the acceleration, jerk, and switching frequency in the interval of acceleration is selected to optimize the power loss and life time of the power electronics by using the elevator model. So, we proposed the method that 50[A] rating power electronics is adopted in 9[kW] load.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.245-253
• /
• 2004

There has been recent demand for extending the life of age-degraded structures and equipment by such techniques as diagnosis, maintenance, safety assessment, and estimating residual life on iron-making plants and hydraulic, thermal, and nuclear power plants. These techniques take into account comprehensive scenarios that may cause malfunction and structural damage and allow an assessment of risk based on the likely scenarios. In particular the safety assessment and residual life estimation of age-degraded ships and equipment facilities require consideration of various factors such as mechanical and thermal stresses, corrosion, hardness, load variation due to changes of operating condition, crack generation and strength reduction of material by fatigue. In this study, a detail thermal stress analysis, one of useful techniques of safety assessment and maintenance, is performed on a blast furnace by using general FEM code (MSC/NASTRAN).

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.98-101
• /
• 2011

A 10 nm nano-silica was introduced to a conventional 3 ${\mu}M$ micro-silica composite to develop an eco-friendly new electric insulation material for heavy electric equipment. Thermal and mechanical properties, such as glass transition temperature (Tg), dynamic mechanical analysis, tensile and flexural strength, were studied. The mechanical results were estimated by comparing scale and shape parameters in Weibull statistical analysis. The thermal and mechanical properties of conventional epoxy/micro-silica composite were improved by the addition of nano-silica. This was due to the increment of the compaction via the even dispersion of the nano-silica among the micro-silica particles.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.84-87
• /
• 2008

The sulfur oxides is one of important materials to come about air pollution at thermal plant consuming fossil fuel. The several flue gas desulfurization equipments are installed and operated to decrease sulfur oxides. The flue gas desulfurization of our thermal plant is designed for optimizing flue gas desulfurization technical development and research by Korea Electric Power Research Institute. We operate this desulfurization equipment. Now, our country imports nearly 97 percentage of the energy source and competes with the world for the energy because of the rise of raw materials cost. The fuel cost decrease of power plants is the most important factor of the operation. The fuel used in the experiment is the domestic anthracite from Kangwon Taeback and the bituminous coal from Russia,Taldinsky Mine. This Study is experimental investigations of desulfurization characteristics for domestic anthracite power plant by increasing bituminous coal. We surveyed possible parameters and conducted the performance about desulfurization equipment in Y.D thermal power plant.

• 한국입자에어로졸학회지
• /
• 제5권3호
• /
• pp.133-138
• /
• 2009

Airborne microorganisms, termed bioaerosols, are etiological agents of many respiratory and skin diseases. There are high demands of controlling the concentration of bioaerosols, specifically in indoor environments. Here, a new system for controlling indoor bioaerosols is designed and evaluated. An idea of a short time exposure to a thermal energy is used in the design of the equipment. The system was tested in laboratory environments. The experimental results show that the new system can reduce the concentration of viable bioaerosols of indoor laboratory environments.

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.79-86
• /
• 2004

In this paper, the uncertainty in the calibration of coaxial thermal noise sources using a noise figure measuring (NFM) equipment is evaluated. Contributions to the uncertainty such as the calibration uncertainty of the standard noise source, mismatch, measurement of adapter efficiency, ambient temperature variation, and repeatability are evaluated in the frequency range of 10 MHz to 18 ㎓. Results show that the expanded uncertainty(k=2) is 0.23 ㏈ for the noise sources of 5 ㏈ and 15 ㏈ ENR, and 0.27 ㏈ for those of 21 ㏈.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1012-1018
• /
• 2006

In this study, the insulation performance of thermal insulation materials such as glass wool, polyetylene and flexible lastomeric foam according to water vapor permeance was estimated by using experimental correlation equation. The results showed the conductivity increment of flexible lastomeric foam which has very low-permeability (${\le}0.15[ng/{\cdot}s{\cdot}Pa]\;or\;{\mu}{\ge}1,000$) is about 50% lower than that of glass wool with the lapse of ten years. The conclusion is that moisture inevitably accumulated in permeable Insulations reduces insulation performance and also accelerates surface condensation in the case of cold water system.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.55-61
• /
• 2009

안료 생산 공정의 슬러지로부터 물을 제거하는 감량화 공정은 제품의 질 향상, 건조경비 절감 그리고 안료 운송경비 절감 등의 다양한 측면에서 매우 중요하다. 안료입자는 크기가 $5{\mu}m$ 이하로 미세하여 기계적인 힘에 의한 탈수가 어렵다. 미세입자의 탈수율 향상을 위해 기존의 필터프레스 탈수장치의 압착판 사이에 고정 열판을 장착하고, 열수를 고정열판에 공급하여 케이크 층에 열을 공급하여 슬러지 탈수하는 열필터프레스 탈수장치를 개발하였다. 이 장치를 통해 압착공정의 유무 탈수시간 변화와 같은 변수 실험을 통해 안료슬러지에 대한 탈수율 평가하였다. 그 결과 열 탈수 시 압착공정에 의한 탈수율이 비압착공정에 비하여 약 20% 증가하였다. 압착공정이 있는 경우, 탈수시간을 70분과 80분으로 하여 수행한 결과 탈수시간이 80분으로 길게 하였을 때, 함수율 46.7wt%에서 43.9wt%로 감소하였고, 탈수속도는 $4.0DSkg/m^2{\cdot}hr$에서 $3.5DSkg/m^2{\cdot}hr$으로 감소한 것으로 분석되었다. 열 탈수는 케이크 층으로부터 액체의 배출을 원활이 할 수 있어 장치의 여과포 막힘 현상(Clogging)을 최소화 할 수 있음을 관찰하였다. 따라서 본 연구를 통해, 압착공정이 탈수율 향상에 효과적이며, 탈수시간이 80분으로 길게 할 경우, 저함수율 탈수 케이크를 생산할 수 있지만 탈수속도의 감소로 인한 생산량 저감을 초래할 수 있다. 즉 본 연구에서 개발한 열필터프레스 탈수장치를 안료와 같은 미세입자가 함유된 슬러지에 적용한다면 보다 효과적으로 탈수케이크를 생산 할 수 있을 것으로 분석된다.

• Structural Engineering and Mechanics
• /
• 제33권6호
• /
• pp.781-784
• /
• 2009