• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.52-55
• /
• 2002

This paper examines the effective thermal conductivity of 3-D braided glass/epoxy composites. 3-D braided composites have a number of advantage over conventional laminate composites, including through-thickness reinforcement, and high damage tolerance and processability. The thermal properties of composites depend primarily on the microstructure of the braided preform and properties of constituent materials. A thermal resistance network model based on structure of the braided preform is proposed by using thermal-electrical analogy. In order to affirm the applicability theses solutions, thermal conductivities of 3-D braided glass/epoxy composites are measured

• 설비공학논문집
• /
• 제24권4호
• /
• pp.306-314
• /
• 2012

Several numerical or analytical models have been proposed to analyze the thermal response of vertical ground heat exchangers (GHEX). However, most models are valid only after several hours of operation since they neglect the heat capacity of the borehole. Recently, the short time response of the GHEX became important in system simulation to improve efficiency. In this paper, a simple new method to evaluate the short time response of the GHEX by using an analogy model of electric circuit transient analysis was presented. The new transient heat exchanger model adopting the concept of thermal capacitance of the borehole as well as the steady-state thermal resistance showed the transient thermal resistance of the borehole. The model was validated by in-situ thermal response test and then compared with the DST model of the TRNSYS program.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.409-419
• /
• 2006

The actuating performance of plate-type unimorph piezoelectric composite actuators having various stacking sequences was evaluated by three dimensional finite element analysis on the basis of thermal analogy model. Thermal residual stress distribution at each layer in an asymmetrically laminated plate with PZT ceramic layer and thermally induced dome height were predicted using classical laminated plate theory. Thermal analogy model was applied to a bimorph cantilever beam and LIPCA-C2 actuator in order to confirm its validity. Finite element analysis considering thermal residual deformation showed that the bending behavior of piezoelectric composite actuator subjected to electric loads was significantly different according to the stacking sequence, thickness of constituent PZT ceramic and boundary conditions. In particular, the increase of thickness of PZT ceramic led to the increase of the bending stiffness of piezoelectric composite actuator but it did not always lead to the decrease of actuation distance according to the stacking sequences of piezoelectric composite actuator. Therefore, it is noted that the actuating performance of unimorph piezoelectric composite actuator is rather affected by bending stiffness than actuation distance.

• 한국산림과학회지
• /
• 제100권2호
• /
• pp.256-265
• /
• 2011

본 연구에서는 Intergovernmental Panel on Climate Change(IPCC) 기후변화 시나리오 A2와 B1에 따른 산림분포 취약성을 평가하였다. 산림분포 취약성은 한국형 산림 생태계 분포 모델 Thermal Analogy Groups(TAG) 의 산림분포예측 방법과 Hydrology Thermal Analogy Groups(HyTAG)에서 정의한 식생유형을 이용하여 기후 변화에 따른 잠재 식물상(Plant Functional Type: PFT)의 분포 변화를 기후변화 민감성과 적응성으로 나누어 평가되었다. 그 결과, 산림분포가 취약한 지역의 면적은 A2 시나리오에서 전체 국토 면적의 30.78%, B1에서는 2.81%로 나타났다. 행정구역별 취약성 평가 결과는 부산이 A2 시나리오에서 가장 취약하고 대구가 B1 시나리오에서 가장 큰 취약성을 나타냈다. 미래 발전 방향에 따라서 상이하게 구축된 시나리오 별 산림 분포 취약성 결과는 앞으로 산림 분야 적응대책 수립에 중요한 자료로 이용될 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.48-51
• /
• 2002

This paper predicted the thermal conductivity of spun carbon/phenolic composites by the thermal resistance method. This method uses the analogy between the diffusion of heat and electrical charge. To verify the theoretical predictions, the thermal conductivity of spun carbon/phenolic composites was examined experimentally. The reported thermal conductivities of graphite/epoxy composite of a eight harness satin laminate was used of the comparison with the prediction values of the model and it was noticed that a good agreement has been found.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.141.2-141.2
• /
• 2005

• 대한공간정보학회지
• /
• 제19권2호
• /
• pp.19-27
• /
• 2011

본 연구의 목적은 기후변화에 따른 잠재 산림분포 예측에 이용되는 기상 자료의 효과적인 구축 및 규모변환(Down Scaling) 방법을 제시 하는 것이다. 잠재 산림분포 예측을 위해 한국형 산림 분포 모형 TAG(Thermal Analogy Group)의 예측 방법과 HyTAG(Hydrological and Thermal Analogy Group)에서 정의한 식생 기능성 유형(PFT: Plant Functional Types)을 함께 적용하였다. 이를 위해 20km 공간해상도의 기상자료를 1km의 공간해상도에 부합하도록 보간 하였다. 이러한 보간 및 규모변환의 한 가지 방법으로 고도에 따른 기온감율을 적용 및 비적용하여 각각의 과거 잠재 산림분포를 예측하였다. 현존 산림분포도와 비교한 정확도 검증에서 기온감율을 적용한 잠재 산림분포가 약 38% 더 정확한 것으로 나타났다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.95-98
• /
• 2003

In woven or knitted preforms for composites, the yams are often twisted for avoiding damage due to the contact with the textile machine elements. When the preforms of twisted yams are used in carbon/carbon composites, the thermal conductivity of the composites varies depending upon the degree of the yarn twist. This paper presents a thermal conductivity model of spun yarn composites. The thermal-electrical analogy and the averaging technique have been adopted in this analysis. The model prediction has been correlated with experimental results in order to confirm the model predictability. Parametric study has also been conducted to examine the effect of the yam twist on the thermal conductivity of spun yarn composites.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.236-245
• /
• 2006

The ventilation performance for the various venting duct arrays has been experimentally compared in the scaled model of the container hold. Most container ships have the ventilation duct system to remove effectively the condensing heat released from container refrigerator. The existing duct system is vertically installed and basically has the number of duct as many as the columns of reefer container stack. In this study, to make up for the weak points having stagnantly hot legions in the centered area of container hold for the present system, the horizontal upward jotting duct system was proposed and proved by temperature rising tests on the scaled model. In this paper, the expected flow regimes and the thermal and hydrodynamic analogies as well as the measured temperature distributions in a hold for various duct types and heat released rates are deeply discussed.

• 한국추진공학회지
• /
• 제26권2호
• /
• pp.1-11
• /
• 2022

일반적인 축소 확대형 초음속 노즐에 대한 열해석에서 경계조건으로 사용되는 벽면의 열전달 계수는 노즐 전체의 열해석 정확도에 영향을 미친다. 이에 많은 열전달계수 도출 방법이 제안되어 왔으며, 본 연구에서는 각각의 기법들을 실제 실험 조건에서 열전달 계수를 계산하고 비교하고자 하였다. 이를 위해 기 수행된 벽면 등온 노즐의 열전달실험에 대해 이론 기반의 analogy 기법과 반경험식, 유체전산해석을 통해 열전달 계수를 도출하고 실험결과와 비교하였다. 해석 결과는 반경험식들은 전반적으로 다른 방법에 비해 대류 열전달 계수를 과도하게 예측하고, Prandtl-Taylor analogy 기법과 k-ω SST 모델을 적용한 전산해석 결과가 실험결과와 비교적 잘 일치하는 경향성을 보였다.