• Industrial Engineering and Management Systems
• /
• 제8권4호
• /
• pp.257-263
• /
• 2009

Focusing on the idea that the equation of exponential smoothing method (ESM) is equivalent to (1, 1) order ARMA model equation, new method of estimation of smoothing constant in exponential smoothing method is proposed before by us which satisfies minimum variance of forecasting error. Theoretical solution was derived in a simple way. Mere application of ESM does not make good forecasting accuracy for the time series which has non-linear trend and/or trend by month. A new method to cope with this issue is required. In this paper, combining the trend removal method with this method, we aim to improve forecasting accuracy. An approach to this method is executed in the following method. Trend removal by a linear function is applied to the original shipping data of consumer goods. The combination of linear and non-linear function is also introduced in trend removal. For the comparison, monthly trend is removed after that. Theoretical solution of smoothing constant of ESM is calculated for both of the monthly trend removing data and the non monthly trend removing data. Then forecasting is executed on these data. The new method shows that it is useful especially for the time series that has stable characteristics and has rather strong seasonal trend and also the case that has non-linear trend. The effectiveness of this method should be examined in various cases.

• 한국항해학회지
• /
• 제9권1호
• /
• pp.95-109
• /
• 1985

It has been generally known that the chattering of an AC electromagnetic contactor due to the fluctuation of attracting force is the primary cause of its abrasion and noise. To reduce this chattering effect, an AC electromagnetic contactor is mostly fitted with a shading coil which works the role to make difference in phases of two distinct components of attracting force. The theoretical interpretation of an AC electromagnetic contactor with shading coil and the equation of its attracting force per unit wattage consumed have already been proposed, however, few explications so far have been made on the determination of optimal circuit constants of shading coil. In this paper, the auther constructs a circuit model of an AC electromagnetic contactor with shading coil which is based on the theoretical interpretation of shading coil examined to be valid by experiments under some assumptions, and defines the equation of attracting force without chattering per unit wattage consumed as a performance function for determining the optimal circuit constants of shading coil. And then, the optimal circuit constants maximizing the performance function are determined by means of computer simulation founded on the above circuit model and the characteristics of those circuit constants are examined with special attention to the coupling coefficient.

• 대한화학회지
• /
• 제24권4호
• /
• pp.322-328
• /
• 1980

1,3,5,7-Tetranitro-1,3,5,7-tetraazacyclooctane (homocyclonite)의 합성에 있어서 부산물로 1,3,5-trinitro-1,3,5-triazacyclohexane (cyclonite)이 동시에 생성되는데, 본 연구는 반응메카니즘 측면에서 주 생성물 homocyclonite로 가는 중간생성물인 1,5-endomethylene-3,7-dinitro-1,3,5,7-tetraazacyclooctane (DPT)을 액체크로마토그래피로 추적하고 반응계내의 총 메틸렌대 아미노 N 비율을 결정하기 위해 반응중에 첨가되는 paraformaldehyde의 최적의 양을 찾기 위한 이론적인 식을 유도하였으며, (식 1 참조) 실제 실험에서 얻어진 결과와 비교함으로서 주생성물인 homocyclonite의 최대의 수율을 얻기 위한 반응조건을 확인하였다.

• STI Policy Review
• /
• 제4권1호
• /
• pp.74-93
• /
• 2013

Although open innovation (OI) has been an important research theme for over a decade, its theoretical framework has been relatively under-researched. As OI involves a wide range of innovation activities, a firm's capacities in the use of the various firm resources play a critical role in OI implementation. However, it is unclear how they affect firms' performances for little is known of OI capacities. Based on a theoretical framework derived from the literature, this study looks into the relationships between six OI capacities (inventive, absorptive, transformative, connective, innovative, and desorptive) and financial performance using the Korean Innovation Survey (KIS) 2008 data. The research model was tested using structural equation modelling (SEM) while potential differences in capacities between different firm groups were also investigated. The results indicate that 1) OI capacities are significantly associated with firms' financial performance; 2) capacities are highly correlated with one another; and 3) some capacities are differently configured between different types of firms. Findings suggest that policy makers should pay more attention to helping firms enhance OI capacities and attempt to develop relevant policies in order to complement inadequate capacities.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권1호
• /
• pp.74-84
• /
• 1986

Ejectors, having no moving, lubricating and leaking parats, are widely used as marine pumps because of its high working confidence. For instance, uses in ships are stripping in crude oil tank, bilge discharge in engine room, ballast water pumping on are carrier, and brine discharge from fresh water generator. And it is also used as cooling water recirculating pump in boiling water type nuclear reactor and deep-well pump. It is not easy to determine the optimal dimension for designing each ejector agreed with its suggested performance condition, because complicated calculations must be repeated to obtain the maximum efficiency affected by flowrate ratio, head ratio, area ratio and so on. Therefore, it is considered that the CAD (Computer-Aided Design) for ejector is a powerful method for design according to the individual design condition. In this paper, a computer program for water ejector design is developed based on the previous paper on theoretical analysis and experimental results for water ejector. And from the theoretical approach, an equation for the working limit and an equation for determing the shape of throat are obtained. The validity of the present computer program is sufficiently confirmed through the comparison of the computed results with the main dimension of the previous manufactured water ejector. This program will be easily developed as the CAD for various kinds of ejectors, including steam ejector.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1259-1268
• /
• 2017

The alpha eigenvalue problem in multigroup neutron diffusion is studied with particular attention to the theoretical analysis of the model. Contrary to previous literature results, the existence of eigenvalue and eigenflux clustering is investigated here without the simplification of a unique fissile isotope or a single emission spectrum. A discussion about the negative decay constants of the neutron precursors concentrations as potential eigenvalues is provided. An in-hour equation is derived by a perturbation approach recurring to the steady state adjoint and direct eigenvalue problems of the effective multiplication factor and is used to suggest proper detection criteria of flux clustering. In spite of the prior work, the in-hour equation results give a necessary and sufficient condition for the existence of the eigenvalue-eigenvector pair. A simplified asymptotic analysis is used to predict bands of accumulation of eigenvalues close to the negative decay constants of the precursors concentrations. The resolution of the problem in one-dimensional heterogeneous problems shows numerical evidence of the predicted clustering occurrences and also confirms previous theoretical analysis and numerical results.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.844-851
• /
• 2018

In this study, the regression equation was suggested to predict of the shot ball velocity according to blade shapes based on discrete element (DE) analysis. First, the flat type blade DE model was used in the analysis, the validity of the DE model was verified by giving that the velocity of the shot ball almost equal to the theoretical one. Next, the DE analyses for curved and combined blade models was accomplished, and their analytical velocities of shot ball were compared with the theoretical one. The velocity of combined blade model was greatest. From this, the regression equation for velocity of shot ball according to the blade shape based on the DE analysis was derived. Additionally, the wind speed measurement experiment was carried out, and the experimental result and analytical one were the same. Ultimately, it was confirmed that the prediction method of the velocity of shot ball based on DE analysis was effective.

• 자동차안전학회지
• /
• 제14권3호
• /
• pp.6-16
• /
• 2022

Recent, the issue of the fourth industrial revolution triggered by technological advances has changed the automobile industry centered on internal combustion engines, and quantitative growth of the global automobile market, which has grown rapidly, has been slowing since 2015. These advances in technology are expected to develop beyond the advanced driver assistance system to autonomous driving technology. According to SAE-J3016 published by the Society of Automotive Engineers, the technology of autonomous vehicles is divided into a total of six stages according to the driver's intervention and automation level from 0 to 5. Securing safety for autonomous vehicles is important. But, research on safety evaluation theory and autonomous vehicle evaluation method based on real vehicle test is insufficient. In this study, the longitudinal distance theory equation and continuous test scenario were proposed for the test method of autonomous vehicles for fixed targets, and the real vehicle test was conducted. When comparing the theoretical values compared to the measured values, it was determined that it was reliable with a minimum error rate of 0.484% and a maximum error rate of 7.391%. Using the proposed theoretical equation, it is judged that it can be used as a safety evaluation method in an environment where real vehicle test is not possible because it can grasp the trend in the longitudinal direction in the development stage.

• Educational Technology International
• /
• 제6권2호
• /
• pp.43-58
• /
• 2005

The purpose of this study was to investigate the impact of organizational learning culture on job satisfaction and organizational commitment. Two streams of scholarly work have provided the theoretical foundations for this study. The first stream comes from the literature on learning organization. The second stream of the theoretical foundation comes from an extensive literature on attitude-intention-behavior relationships. In addition, this study was tested three alternative models. Alternative model 1 employed job satisfaction as the mediating commitments variable between learning culture and organizational commitment. Alternative model 2 used organizational commitment as the mediating variable between learning culture and job satisfaction. Finally, alternative model 3 specified a direct impact of learning culture on both job satisfaction and organizational commitment, and reciprocal linkages between these two variables. The results of this study support the hypothesized relations among an organization's learning culture, job satisfaction, and organizational commitment. The findings of this study are various congruent with a widely accepted hypothesis that job satisfaction serves as an appraisal function in evaluating various work environments and determining emotional responses such as organizational commitment. Organizational learning culture is one of the important factors that organizations cannot overlook. Therefore, the findings of this study provide a new direction for researchers seeking to explain the complex relations among these central organizational variables.

• 한국지반공학회논문집
• /
• 제26권3호
• /
• pp.35-45
• /
• 2010

말뚝으로 지지된 성토지반 내에 발달되는 펀칭전단현상에 의하여 성토하중이 말뚝에 전이되는 메커니즘을 규명하였다. 성토지반 속에 발달하는 펀칭전단파괴의 기하학적형상에 근거하여 이론해석을 실시하였고 말뚝으로 전이되는 성토하중의 크기를 예측할 수 있는 이론식을 제안하였다. 이 이론식에는 말뚝캡보로의 하중전이 메커니즘에 영향을 주는 여러 매개변수가 포함되어 있다. 이 이론식의 신뢰성을 검증하기 위해 일련의 모형실험을 실시하였다. 모형실험은 말뚝캡보폭이 좁은 경우와 넓은 경우의 두 종류의 캡보에 대하여 실시하였다. 모래성토는 7단계로 나누어 단계적으로 실시하였으며 매 성토단계에서의 재하시간은 장기재하방식과 단기재하방식의 두 가지 방식으로 실시하였다. 장기재하방식은 매 성토단계에서의 히중재하시간을 24시간으로 하였고 단기재하방식은 하중재하시간을 2시간으로 하였다. 이들 모든 모형 실험에서 측정된 연직하중의 측정값은 제안된 이론식에 의거 산정된 예측치와 잘 일치하였다. 또한 이 이론식의 현장 적용성을 검증하기 위하여 성토지지말뚝이 시공된 한 현장의 계측결과와 이론치를 비교 검토하여 보았다. 이 현장에서는 캡보 사이의 간격을 너무 넓게 설치하였기 때문에 성토지반 내에 지반아칭이 발달하기가 어려워 펀칭파괴가 발달하였을 것이 예상되는 현장이었다. 결국 이 이론식으로 예측된 연직하중은 이 현장에서 측정된 현장계측 결과와도 잘 일치하였다.