• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.112-123
• /
• 2010

This study aims at selecting contents of a text book, 'Understanding on Steel', and at presenting compilation methods of that book based on the previous researches on teaching young meister of steel industry. To do that, this, first analyzes subject profiles of textbooks on 'Understanding on Steel' to make questionnaires for the textbook compilation. Second, this study selects textbook contents improved through interviews. Third, this study revises, and complements broad contents, and selects detail units by selected professional committee which is composed of textbook researchers and editor groups. The research results are as follows: First, this study confirms that the formation of the broad contents of 'Understanding on Steel' presented in textbook profiles are appropriate, Second, this study selects subjects of detailed units along with the middle units of 'Understanding on Steel' by selecting parts needed to be improved in terms of the textbook formation. Third, this study presents the text formation system for the broad, middle and detailed units of the textbook, 'Understanding on Steel'.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.118-127
• /
• 2007

SAW(Submerged Arc Welding) process is generally applied to a wide range of welding area in the fabrication of steel structure. This process has a good characteristic properties such as the high quality of welds and the high deposition rates, but in case of welding on a thick steel plate, it also has higher cold crack susceptibility than that of a thin steel plate. The purpose of this research is to find the main factor of crack generation and clarify the countermeasure for crack prevention, and then establish the optimum welding condition in a heavy thick steel plate. The results of this study are as follows, 1. The cause of crack generation is found the diffusible hydrogen penetrated into weld metal by decomposition of the remained moisture in SAW flux during welding. 2. For the removal of diffusible hydrogen, the raw materials of SAW flux are to be dehydrated at the high temperature in the initial manufacturing stage. 3. Mechanical properties of weld metal welded with the dehydrated SAW flux were evaluated very excellent, furthermore the weld metal has been proved to have low diffusible hydrogen content with 3.1ml /100g. 4. The weldability and quality welded with thick steel plates were improved by establishing the new optimum welding condition.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.173-178
• /
• 2002

In this research, we have worked about the radiation thermometer which can be applied to the hazard circumstance such as steel plant. In the results, we have developed radiation thermometer of a measuring range $500-1500^{\circ}C$, accuracy ${\pm}0.1%$, repeatability ${\pm}0.1%$, resolution $0.2^{\circ}C$. We performed extensive field test for 6 months at the hot strip mill in steel plant. Through the test, we have confirmed the reliability of the developed pyrometer.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.10-26
• /
• 2005

In our model, we keep inventory to satisfy uncertain demands which arrives irregularly. In this situation, we have additional two constraints. First, we need to have certain amount of order consolidation (consolidation constraint) for the orders to replenish the inventory because of production or purchase constraint. And also, if we order at a certain date which was set by administrative convenience, we have amount constraint to order the consolidated order demands (capacity constraint). We showed this variant inventory policy is needed in steel industry and note that there will be possible similar case in industry. To deal with this case, we invented a variant replenishment policy and show this policy is superior to other possible polices in the consolidation constraint case by extensive simulation. And we derive a combined solution method for dealing with the capacity constraints in addition to the consolidation constraints. For this, we suggest a combined solution method of integer programming and simulation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.2
• /
• pp.99-112
• /
• 2006

In our model, we keep inventory to satisfy uncertain demands which arrives irregularly. In this situation, we have additional two constraints. First, we need to have certain amount of order consolidation (consolidation constraint) for the orders to replenish the inventory because of production or purchase amount constraint. And also, if we order at a certain date which was set by administrative convenience, we have capacity constraint to order the consolidated order demands (capacity constraint). We show this variant inventory policy is needed in steel industry and note that there will be possible similar case in industry. To deal with this case, we invent a variant replenishment policy and show this policy is superior to other possible polices in the consolidation constraint case by extensive simulation. And we derive a combined solution method for dealing with the capacity constraints in addition to the consolidation constraints. For this, we suggest a combined solution method of integer programming and simulation.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.71-73
• /
• 2003

The paper discussed for energy saving technology of electric arc furnace (EAF) in steel making industry. The energy of EAF in steel making process is nearly 10% of total manufacturing cost. This paper is shown new trand of energy saving technology and future study analysis of technological evolution of the EAF by 2010 issued IISI.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.193-195
• /
• 2011

Nowadays, climatic environment change has become a major issue in the world. This causes major emissions of carbon dioxide industries steel industry, thermal power industry, cement industry is essential in the reduction of carbon dioxide, which is based on total carbon dioxide emissions account for most of the construction industry in an effort to minimize the environmental load is needed. accordingly, through case studies, It can be induce the selection to minimize environmental load by comparing the output of quantitative energy consumption and carbon dioxide emissions per constructional methods. As a result of this study, RC Structure was less environmental load than SC structure.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.203-212
• /
• 2020

This study surveyed 244 employees out of a total of 356 graduates from the steel industry in 2015 to February 2019. The employment rate of graduates is POSCO 67.7%, Hyundai Steel 23.8%, POSCO families 13.1%, and Hyundai Steel families 8.5%. The national certificates acquired by each section were surveyed, with 53.1% of metal section, 39.8% of mechanical section, and 7.1% of other section. Preferred national certificates were POSCO, machinery maintenance industry technicians, steelmaking technicians, and Hyundai Steel followed steelmaking technicians, mechanical maintenance industrial technicians. Among other certifications, the national certificate of industrial safety industrial engineer was preferred. In addition, the average number of national certificates per person for major employment is 5.06 for POSCO, 5.35 for POSCO families, 5.29 for Hyundai Steel, and 4.73 for Hyundai Steel families. The average number of national certificates for S-OIL, KEPCO, Poongsan Metal, etc., is 2.51. In conclusion, it was found that the national certificates related to majors are used as the main evaluation data in finding suitable majors and competency for the job when recruiting talents.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.131-138
• /
• 2020

In accordance with huge demand for capital to meet the expansion of steel production, there are more and more steel companies who have officially listed their stocks in HOSE and HNX. One of the key issues in successful initial public offerings and seasonal offerings for these companies is how to make stocks of steel companies become more attractive in the eyes of investors. The purpose of this research is to analyze the determinants of share prices of listed steel companies in Vietnam. This study utilized macro-economic variables, ratios and indicators representing characteristics of steel industry collected from Quarter 1/2006 to Quarter 4/2019 in association with the panel data and the feasible generalized least square (FGLS) model to evaluate the degree of these factors on the share prices. The results of the research show that ROE, Cons_rate, and CO2_rate are three main factors affecting the share prices of listed steel companies. Among which, ROE and Cons_rate have a positive effect, while CO2_rate has a negative effect on the share prices of listed steel companies. It also confirms the relationship between the environmental factor, construction industry factor and the stock prices. This lays foundations for recommendations for the future policies towards environmental protection and sustainable development.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.21-29
• /
• 2014

Purpose - This research undertakes to understand the competitiveness of the steel distribution industry of both Korea and China to strengthen Korea-Sino economic cooperation, examines impediments to trade between the two countries to analyze causes which affect trade, and examines improvements in these areas to identify means of trade expansion. Through this survey of a defined period, we can identify the structural factors of trade dependence in the relationship between Korea and China. Research design, data, and methodology - The data were collected from the Korea Traders Association, the Korea Customs Office, and UN Comtrade, from which whole table indexes are calculated. The research methodology uses trade-related indexes to focus on analyzing comparative advantages based on time-series analysis statistics data (2000-2012) by using the analysis index of trade intensity index (TII), the revealed comparative advantage index (RCA), and the trade specialization index (TSI). Results - The export ratio for Korea to China was slightly higher in 2000 at 2.867, and the export ratio for Korea to China was sustained in 2005. However, it diminished gradually, reaching 1.263 in 2012. During the period 2000-2012, the indexes were maintained without any significant change. However, they still remain close to -1. In particular, in 2012 it is the closest it has ever been to -1. Therefore, China has a comparative advantage in export specialization. On the other hand, Korea has a comparative advantage in import specialization. For the research period, all indexes were much lower than 1, which means that Korea has consistently had a comparative disadvantage against China for the past 10 years when compared to other industries, even though it experienced improvement in 2000. Conclusions - The summary of conclusions based on empirical analysis research are as follows: First, per the trade intensity index of industries between the two countries, we conclude that the export ratio index in 2000 is 2.867, which means the export ratio of Korea to China is slightly higher. Furthermore, the ratios of 2.259 and 1.263 held in 2005 and 2012, respectively, meaning that the export ratio of Korea to China was maintained in 2005, but was diminishing gradually as the index in 2012 was 1.263. Second, per the trade specialization index of the steel distribution industry between Korea and China, the value was -0.379 in 2000, -0.368 in 2005 and -0.568 in 2012. Looking at the whole period of 2000-2012, the indexes remained without any significant change. However, they are still moving closer to -1. In particular, in 2012 it is the closest it has ever been to -1. Third, regarding the revealed comparative advantage index of the steel distribution industry between Korea and China, the RCA indexes in 2005 and 2012 are 0.246 and 0.306, respectively, which are still far from 1, even though the index has improved compared to the 2000's value of 0.0001. Therefore, the Korean steel distribution industry is at a significant comparative disadvantage to that of the Chinese steel distribution industry.