• 방사선산업학회지
• /
• 제5권1호
• /
• pp.75-80
• /
• 2011

This study was to determine the microbiological safety and tensile strength of gammairradiated porcine tendon for the development of safe xenografts. Escherichia coli and Bacillus subtilis were used as model pathogens and inoculated as $10^6{\sim}10^7log$ colonies forming unit $(CFU)g^{-1}$. As model virus from porcine, porcine parvovirus (PPV), bovine viral diarrhoea virus (BVDV) and poliovirus were inoculated as $10^5{\sim}10^6$ tissue culture infectious dose $(TCID)_{50}g^{-1}$ into porcine skin. The $D_{10}$ value of E. coli and B. subtilis was measured as $0.32{\pm}0.082kGy$ and $4.0{\pm}0.312kGy$, respectively. Additionally, the $D_{10}$ values of PPV, BVDV and poliovirus were also shown as $1.75{\pm}0.131kGy$, $3.70{\pm}0.212kGy$ and $6.26{\pm}0.332kGy$, respectively. Gamma irradiation decreased the tensile strength of porcine tendon. Results indicate that microbiological safety of porcine tendon can be improved significantly by gamma irradiation. However, further studies are needed to improve the tensile strength of gamma-irradiated porcine tendon.

• 한국환경보건학회지
• /
• 제33권3호
• /
• pp.211-216
• /
• 2007

This study was to determine the effect of cooling part of the trunk without harm for the health. The results provide basic data for the development of clothing which could increase work efficiency and reduce body strain in hot environment. Eight males took part in the study. The experiment was conducted in a climate-chamber controlled with $37{\pm}1^{\circ}C,\;50{\pm}5%R.H$. The trunk was divided into six areas to be cooled: head, neck, chest, abdomen, the upper back, the lower back. According to preceding studies, permissible safety cooling limits of skin temperature, of each part of the trunk for four hours cooling were $25^{\circ}C$ on the head, $20^{\circ}C$ on the neck, $27^{\circ}C$ on the chest, $25^{\circ}C$ on the abdomen, $20^{\circ}C$ on the upper back, $20^{\circ}C$ on the lower back. So cooling temperatures of each region set up temperatures above mentioned. In conclusion, the head, the neck and the upper back cooling could reduce sweating amount, rectal temperature and heart rates and reduce the heat stress of workers exposing in the hot environment by decreased subjective sensations of heat and comfort. Thus, it was concluded that effectiveness of cooling among the trunk was best on the head and the neck.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.18-21
• /
• 2004

A GFRP based composite blade was developed for a 750kW wind energy conversion system of type class I. The blade sectional geometry was designed to have a general shell-spar structure. The load cases specified in the IEC61400-1 international specification were considered. For withstanding all relevant extreme loads, the structural analysis for the complete blade was performed using a commercial FEM code. The static load carrying capacity, buckling stability, blade tip deflection and natural frequencies at various rotational speeds were evaluated to satisfy the strength requirements in accordance with the IEC61400-1 and GL Regulations. For designing a lightweight blade, the thickness and the lay-up pattern of the skin-foam sandwich structures were optimized iteratively using the DOT program T-bolts were used for joining the blade root and the hub, which were modeled using a 3D FE volume model. In order to confirm the safety of the root connection, the static stresses of the thick root laminate and the steel. bolts were predicted by taking account of the bolt pretension and the root bending moments. The calculated stresses were compared with the material strengths.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.434-445
• /
• 2014

The meaning of this research is to make recognition for necessity of ergonomic fashion design research. And the purpose is to provide the guidelines for ergonomic fashion product development. For this, literature research and analysis of empirical illustration of product design indicating ergonomics characteristic are implemented. Among the body-conscious active sportswear, cycle wear, swim suit, and skin scuba wet suit were selected and analyzed. Then they were explained according to the ergonomics characteristics arranged previously. Lastly, the features of ergonomic fashion design were arranged by composition elements of the clothing such as pattern, sewing, material and detail. The characteristics of ergonomic design derived from literature and advanced researches are efficiency, usability, functionality and safety. Through research and analysis, the characteristics of ergonomic fashion design are as followings. In pattern, it is related to the 3D structure division pattern, the reduction pattern design, the closing & opening part design for easy detachment, the receipt and the changeable design. In sewing, it is related to the use of latest sewing techniques and the finish using silicon or rubber band. In material, it is related to the use of high performance fabrics and the proper arrangement of these. In detail, it is related to the convenient detail, the storage detail, the adjustable detail, and the body protection detail.

• 간호행정학회지
• /
• 제9권2호
• /
• pp.265-282
• /
• 2003

Purpose : This study was conducted to provide for a basic resource, which can be used to set up a efficient management system in Cardiac Surgery Intensive Care Units(CSICU). Method: 1) Questionnaires were administered and observation methods were used, to examine the nursing activities performed in the CSICU after having reviewed related literatures and a review by the experts. Thus, the nursing activities were designating 254 activities and classified into 28 categories. 2)The 22 nurses in the 2 CSICUs filled out questionnaires about nursing activities from 12 April, 2002 to 17 April, 2002. The frequency of the nursing activities in the 28 categories counted and new nursing activities added by directly observing 12 nurses by two trained research staffs for 4 day. 3)In terms of validity, the 264 nursing activities were analysed by the 25 experts. As a result, 231 nursing activities were found valid and remained as appropriate nursing activities to be used for the careful analysis of the nursing activities in CSICUs. Result: The 22 categories are as below: assessment, monitoring, respiration management, nutrition management, elimination/drainage management, mobility management, sanitation management, safety management, temperature management, specimens collection, preparation and assistance of treatment, skin/wound management, infection management, medication management, education/support, dying patient care, recording/keeping, supplies management, environment management, communications, evaluations, professional development Conclusion : The manifest job description of the staff nurse will contribute to improving the efficiency of the nursing activities and to reducing the role conflicts among the medical staffs.

• 한국중재학회지:중재연구
• /
• 제32권3호
• /
• pp.93-109
• /
• 2022

Cosmetics are products that consumers use every day to maintain or improve the health of their skin and hair. Therefore, the expansion of the cosmetics market leads to the expansion of disputes over cosmetic damage. Along with constant social changes, new conflicts continue to arise. In order to resolve these disputes, various consumer dispute resolution organizations and methods are required. Therefore, Alternative Dispute Resolution (ADR), an alternative method that can provide a reasonable judgment on problems that occur during the manufacture and distribution of cosmetics with expert knowledge of the industry, is required. Korea resolves disputes between consumers and manufacturers caused by cosmetics through the ADR of the Korea Cosmetics Association and the Korea Consumer Agency. It handles disputes related to accidents caused by cosmetics, offers consultation on consumer complaints on cosmetics and provides information on accidents and safety related to cosmetics. It is not possible to completely eradicate disputes from cosmetic damages. Therefore, it is necessary to expand and efficiently operate the cosmetic ADR system for consumers. In this study, the current status of cosmetic damage disputes and damage relief and the role of the domestic ADR system were reviewed. Consumers should be easily relieved from damage caused by cosmetics. By accumulating important precedents with an efficient cosmetic damage dispute resolution system, disputes over cosmetic damage should be smoothly resolved.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.287-298
• /
• 2017

The present study aims to determine the structural response of full scaled rectangular columns under both of vertical and lateral loads using numerical methods. In the study, the composite columns considering full concrete filled circular steel tube (FCFRST) and concrete filled double-skin rectangular steel tube (CFDSRST) section types are numerically modelled using ANSYS software. Vertical and lateral loads are applied to models to assess the structural response of the composite elements. Also similar investigations are done for reinforced concrete rectangular (RCR) columns to compare the results with those of composite elements. The analyses of the systems are statically performed for both linear and nonlinear materials. In linear static analyses, both of vertical and lateral loads are applied to models as only one step. However in nonlinear analyses, while vertical loads are applied to model as only one step, lateral loads are applied to systems as step by step. The displacement and stress changes in some critical nodes and sections and contour diagrams are reported by graphs and figures. At the end of the study, it is demonstrated that the nonlinear models reveal more accurate result then those of linear models. Also, it is highlighted that composite columns provide more and more safety, ductility compared to reinforced concrete column.

• 한국미생물·생명공학회지
• /
• 제50권4호
• /
• pp.465-476
• /
• 2022

The importance of beneficial microorganisms, particularly probiotics, that coexist in the human body, is being increasingly recognized. Probiotics are representative health functional foods that provide health benefits to humans through the production of various metabolites, including short-chain fatty acids. However, the health benefits are strain-specific, and the use of each probiotic strain should follow guidelines that assure its safety. Accurate identification of the strain should be managed through genetic and phenotypic analyses of the strain. Besides, the functionality of probiotics should be disclosed in vitro and in vivo so that they can be used as legal functional ingredients (i.e., individual standards). In this review, we deal with the guidelines, including the technical factors related to probiotic strains. The common health effects of probiotic strains include proliferation of beneficial bacteria, control of harmful bacteria, and facilitation of bowel activities. Probiotics with various functionalities (e.g., body fat and cholesterol reduction, vaginal health, and improvement of skin's immune system) have been investigated as "individual standards of raw materials for health functional foods" provided by MFDS. In the future, various biotechnologies including synthetic biology can be applied to produce customized probiotics to improve human health.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.25-30
• /
• 2016

In this paper, personal electrical stimulation medcial devices using bioelectrical stimulating was developed. Therapy effect of RET(resistive electric transfer) was more effective than CET(capacitive electric transfer), but CET was adopted because of safety issue. Then, the optimum parameters that may be effective in thin skin or facial wrinkles was set. For example, the frequency of the pulse voltage for stimulation is 1.8[MHz], burst frequency is 7[kHz] or 400[Hz], the development of devices was to have ON/OFF control and frequency control. When burst frequency was adjusted 7[kHz], heat was generated in the electrode. The case of 400[Hz] the heat was little generated. The microcontroller ATmega128-based experimental results show that the proposed personal high frequency electrical stimulation devices can be applied to medical equipment using therapy effect successfully.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.93-102
• /
• 1992

본 논문에서는 종굽힘하에서 이중선각구조선박의 최종굽힘강도와 피로강도에 대한 신뢰성평가를 다루었다. 최종굽힘강도는 beam-column approach의 개념을 이용하여 구하였고, 보강판의 응력-변형도 곡선들은 소성힌지의 개념을 이용하여 유도하였다. 피로강도는 피로손상에 대한 것만을 고려하였고, 이를 위해 Miner의 손상식을 이용하였다. 갑판에서 가능한 여러 연결부 형태에 대해 그 피뢰신뢰성을 추정하였고 또한 굽힘에 의한 파괴와 피로에 의한 파괴를 동시에 고혀하는 일종의 Series System에 대한 신뢰성을 평가를 하였다.