• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.2
• /
• pp.224-236
• /
• 2020

In this study, the 4th (1997) and 6th (2013) direct measurements of Size Korea compared the changing shape of women between the ages of 12 and 18. Comparing the items of height and length, the height and shoulder height were significantly reduced, the waist height was not significantly different, and the height of the upper hip was significantly increased, resulting in a smaller upper torso ratio and a higher lower torso rate. The width and thickness associated with human obesity, the circumference items and obesity levels often increased significantly with the change of the times, indicating that the overall body size was increased and that the chest area was changed to a cylindrical shape with changes in the breast equilibrium. Comparing agespecific measurements with graphs analyzing the trend of change in growth, the results showed that the change in 1997 was minimal since age 14; however, a continuous increase was achieved in 2013 that corresponded to the age at which growth is complete. The results of these studies are expected to be used as basic data to predict pattern design, body implementation, and trends in shape changes for young women.

• Journal of Community Nutrition
• /
• v.3 no.1
• /
• pp.8-13
• /
• 2001

The purpose of study was to test the hypothesis that three are differences in body size dietary behavior and nutrient intakes of adolescent girls with weight control experience. Cross-sectional survey was carried out with a questionnaire and anthropometric measurements . Subjects were 724 healthy adolescent girls from middle and high schools of urban and rural areas in Inchon and divided into two subgroups with weight control experience. Subjects trying to lose weigh were 25.1% in middle school girls and 47.1% in high school girls. There were significant differences in weight and BMI between weight control experience and non- experienced groups in middle school students. There were significant differences in skipping meals and reason of skipping meals between weigh control experience and non-experience groups which might show that skipping meal was used as a weight loss method among female school students. There was no significant difference in nutrient intakes between weight control experienced and non-experienced groups in middle and high school subjects. these results suggest that nutrition education is necessary for adolescent girls to practice appropriate weigh control strategies including desirable eating habits and adequate intake of nutrients such as energy vitamin A vitamin B$_2$calcium and iron.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.113-130
• /
• 2005

With a view to developing male dress forms for educational purposes, human body measurement was made for male adults in their twenties residing in Busan, Korea. Based on the results, the following conclusion was obtained: 1. Comparison d the measurement in Busan and the data of the 5th Korean physical dimensions(Size Korea) In the comparison of the Busan male adults in their 20s with national physical dimensions(Size Korea) by way of the Mollison relational deviation line, all the 28 items revealed differences less than 0.7. As the Busan sample reflects the body type d the average Korean men in their 20s, Busan's measurement results can be safely used as the data for dress form development. 2. Results of front body type classification According to the factor analysis, seven factors of the front body type were produced to explain 77.25%. The factors were shoulder angles, waist height, hip shapes, chest shapes, proportion of body(chest, waist, hip)width to shoulder width and so on. Cluster analysis brought about three somatotype groups. First, the body type with the least differences in hip-waist width, shoulder-waist with, and hip angles (24,23% in appearance) was named Type H. Second, the body type with the most chest-waist width and hip angles (38.66% in appearance) was called Type Sam X Third, the body type with the greatest shoulder-chest width, shoulder-hip width, and shoulder angles (37.11% in appearance) was termed Type Y.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.20-28
• /
• 2021

With an increase in the commercialization of electricity, and the development of advanced and large electric devices and various wireless radio wave services, concerns over the effects of electromagnetic fields on human health have increased. Accordingly, the World Health Organization encouraged the development of international standards by establishing the 'International Electromagnetic Fields Project' in 1996 based on studies on the harmful effects of electromagnetic fields on the human body. Moreover, the National Institute of Environmental Health Sciences (NIEHS) classified electromagnetic fields as possible carcinogens under Group 2B category, even though they have been found to have a weak correlation with those effects on human health. Mid-to-large-sized electric facilities used at industrial sites mostly adopt a commercial frequency of 60 Hz, and workers handling these facilities are exposed to such extremely low frequency (ELF) fields for a long time. A previous study suggested that exposure to ELF electromagnetic fields with frequency ranges from 0 to 300 Hz, even for a short time, at densities higher than 100 μT may have harmful effects on human body as it affects the activation of nerve cells in the central nervous system by inducing an electric field and current and stimulating muscles and the nervous system in the body. Such studies, however, focused on home appliances used by ordinary people, and research on facilities utilizing high-capacity current and operated by workers at industrial sites is lacking. Therefore, in this study, a 3000 kilowatt generator, which is a high-capacity electric facility employed at industrial sites, was investigated, and the size of the magnetic fields generated during its no-load and high-load operations per distance to produce a map was measured to reveal spots deemed hazardous according to domestic and international exposure standards. The findings of this study is expected to alleviate workers' anxiety about the harmful effects of magnetic fields on their body and to minimize the level of exposure during operations.

• Korean Journal of Human Ecology
• /
• v.23 no.5
• /
• pp.891-904
• /
• 2014

The objective of this study is to classify somatotypes of back-surface shape of women in their late 20s by using 3D body scan data(Size Korea 2010) in order to improve fitness of Hanbok Jeogori. The results were as follows: 1. According to the in-depth survey of the experienced expert's interview, most problems related to the fit were caused by the back area of Jeogori. 2. The result of factor analysis indicated that 6 factors were extracted and those factors comprised 82.85% of total variance. 3. According to the cluster analysis, back somatotypes of women in their late 20s were categorized by two types : straight type(54.1%) and bending type(46.9%). The results could be used as the Hanbok Jeogori to improve the fitness of back-surface shape.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1190-1195
• /
• 2011

This paper presents a waist pressure evaluation method in human sensibility using a electroencephalogram(EEG) signal. For this objective, a size-controllable waist-belt is used. First of all, EEG signals for relaxed state are acquired. Then, the waist-belt of the subject is tightened about 90% of normal state. After a few minutes, the belt of the subject is released. Some necessary preprocessing is performed on the acquired signals, Linear Prediction (LP) coefficients are utilized as the feature parameters extracting the characteristics of EEG signal, and a multi-layer neural network is used for indicating the state of body pressure. The results of the method showed 77.2% of coincidence with body pressure states. This may be compromising results for ssubject-independent sensibility evaluation using EEG signal.

• Proceedings of the ESK Conference
• /
• 1993.04a
• /
• pp.18-26
• /
• 1993

When designing workplaces, controls should be placed within the reach of operator's arm or foot to guarantee effective performance. The aviation industry is perhaps the chief user of anthropometric data for its need to weight minimization and space optimization. In designing a workplace which must cater to a wide range of operator size, it might be sufficient to plan only for the 'average person'. Static arm reach measurements which are taken in conventional, standardized positions provide the necessary information, but they cannot be directly applied to dynamic situations. In this research, an approximate algorithm to generate the workspace of the human body including foot reach and trunk motion is proposed and tested. The robot kinematics was employed to represent the human body as a multi-link system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.153-171
• /
• 2016

With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.804-812
• /
• 2017

This study builds a database that can be reflected in the production of dress form for fitting by typifying the upper body shape of a senior male. This study analyzed the 3D shape data of 405 persons of the 5th Size Korea. The age range is from 50s 210 persons and 60s 205 persons. Analysis items to identify upper body shape of senior males consisted of 51 items. 3D shape data were also measured using a Geomagic Design ${\times}$ program for the analysis of the upper body of the senior male required for the dress form of this study. The reference point was based on the Size Korea 2010 3D measurement standard and created points (Back-protrusion) on shape data. As a result of the senior men type, the senior men's body type was classified into four types:1. Overall, the upper body is a large body type and the most undistorted overall body type 2. Width / Thickness Flatness is the largest and vertical length factor is the smallest abdominal obesity type 3. Severe flexion of the back part type 4. The upper body is small and the scapular bending is severe. The elderly body type showed a high distribution ratio in the type with severe flexion. The development of a dress form that reflects the cause of the finery issue can improve the fit of ready-to-wear.