• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.2
• /
• pp.153-162
• /
• 2006

Customer satisfaction is an ever-growing concern of management throughout the world. To find the way to increase customer satisfaction, we must understand customer requirements. Kano distinguishes between three types of product requirements (must-be, one-dimensional, attractive requirement) which influence customer satisfaction in different ways when met. In this paper, potential customer satisfaction improvement (PCSI) index was developed using Kano model and CS coefficient. Timko has developed customer satisfaction (CS) coefficient based on Kano model. The PCSI index represents how much a service feature can increase the degree of customer satisfaction when the service feature is fully fulfilled. In order to explain the meaning of PCSI index, a case syudy of a Family Restaurant is done. It is also discussed how to use the index strategically.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.3
• /
• pp.52-61
• /
• 2023

Conflicts in a construction project not only make negative impacts on project performance such as schedule delay or cost overrun but also require social cost to resolve the conflicts. Although the conflict needs a preemptive management because a conflict usually begins with a complaint, existing studies have focused on conflict resolution after it occurs. This study identifies and categorizes complaints which mainly appear in the construction projects. Those complaints were evaluated and quantified in terms of occurrence frequency and potential to conflict through a questionnaire survey with industry experts. Using the survey results, this study examines the characteristic of complaints in linear project and clustered project, and analyzes what kind of complaints occur by project type. As the results, this study derives the complaints with high potential to the conflicts that should be managed first during managing a construction project in each project type.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.614-615
• /
• 2015

In these days, global construction market is speedily increasing and domestic construction companies have a chance of new contracts. In the meantime, international projects have been increasingly forced to cope with potential risks, which seriously impacted achieving the targeted time and cost. In this study, we introduce a computerized risk management system for international EPCS projects, which is constructed on the needs of practitioners and decision makers as an aid to proactively control the potential risks and to monitor continuously their status and variation. The system is called the Project Risk Management System (PRiMS) is useful for furnishing project managers with warning signals as a project is progressing and helpful for producing the total risk score and tracking risk variation.

• Molecules and Cells
• /
• v.41 no.8
• /
• pp.717-723
• /
• 2018

Chimeric antigen receptor (CAR) T-cell therapy, an emerging immunotherapy, has demonstrated promising clinical results in hematological malignancies including B-cell malignancies. However, accessibility to this transformative medicine is highly limited due to the complex process of manufacturing, limited options for target antigens, and insufficient anti-tumor responses against solid tumors. Advances in gene-editing technologies, such as the development of Zinc Finger Nucleases (ZFNs), Transcription Activator-Like Effector Nucleases (TALENs), and Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR/Cas9), have provided novel engineering strategies to address these limitations. Development of next-generation CAR-T cells using gene-editing technologies would enhance the therapeutic potential of CAR-T cell treatment for both hematologic and solid tumors. Here we summarize the unmet medical needs of current CAR-T cell therapies and gene-editing strategies to resolve these challenges as well as safety concerns of gene-edited CAR-T therapies.

• Nuclear Engineering and Technology
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2008

One of the major current challenges to nuclear energy lies in its competitiveness. To stay competitive the industry needs to reduce maintenance and fuel cycle costs, while enhancing safety features. Extended burnup is one of the methods applied to meet these objectives However, there are a number of potential fuel failure causes related to increased burnup, as follows: l) Corrosion of zirconium alloy cladding and the water chemistry parameters that enhance corrosion; 2) Dimensional changes of zirconium alloy components, 3) Stresses that challenge zirconium alloy ductility and the effect of hydrogen (H) pickup and redistribution as it affects ductility, 4) Fuel rod internal pressure, 5) Pellet-cladding interactions (PCI) and 6) pellet-cladding mechanical interactions (PCMI). This paper discusses current and potential failure mechanisms of these failure mechanisms.

• Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.191-198
• /
• 2018

Improper management and unsanitary approaches are implemented in disposal of leachate, which has resulted in groundwater pollution at village Uruli Devachi, Pune, India. Various physico-chemical treatment methods are commercially available for leachate treatment. However, the application of biological methods viz. phytoremediation to the municipal solid waste landfill leachate has been limited. We report the remediation ability of Typha aungstifolia and Acrorus calamus that is capable of reducing hazardous constituents from the landfill leachate. After 96 h of hydraulic retention time (HRT), it was observed that T. aungstifolia-treated sample showed high reduction potential in reducing biochemical oxygen demand, chemical oxygen demand, hardness, total dissolved solids, Na, Mg, Ca and Ni whereas A. calamus showed greater reduction capacity for alkalinity, Cl, Cu, Zn and Cr. Furthermore, it was also observed that T. aungstifolia withstood longer HRT than A. calamus. In situ application of T. aungstifolia and A. calamus for remediation of landfill leachate carries a tremendous potential that needs to be further explored.

• Journal of Ginseng Research
• /
• v.48 no.2
• /
• pp.140-148
• /
• 2024

Synthetic biology approaches offer potential for large-scale and sustainable production of natural products with bioactive potency, including ginsenosides, providing a means to produce novel compounds with enhanced therapeutic properties. Ginseng, known for its non-toxic and potent qualities in traditional medicine, has been used for various medical needs. Ginseng has shown promise for its antioxidant and neuroprotective properties, and it has been used as a potential agent to boost immunity against various infections when used together with other drugs and vaccines. Given the increasing demand for ginsenosides and the challenges associated with traditional extraction methods, synthetic biology holds promise in the development of therapeutics. In this review, we discuss recent developments in microorganism producer engineering and ginsenoside production in microorganisms using synthetic biology approaches.

• Clinical and Experimental Pediatrics
• /
• v.50 no.1
• /
• pp.14-19
• /
• 2007

Advances in neonatal care have been responsible for the improved survival of prematurity but have not resulted in decreased morbidity. Once the high-risk infants is discharged from the hospital, his or her many special care needs do not cease. A well-coordinated multidisciplinary approach is essential in the follow-up care of these infants. Special attention must be given to their growth and nutrition, immunization, vision and hearing, and sequelae of illnesses experienced during the neonatal period. The role of pediatrician in helping these infants attain their full physical, neurodevelopmental, emotional, and psychosocial potential by providing optimal care is invaluable.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.1
• /
• pp.72-78
• /
• 2014

The study has been designed to develop water vapor supply for semiconductor industry, industrial gas manufacturing, impurities analysis, and fuel cell. Water concentration in air reached $1019{\mu}mol/mol$ at dew temp ($-20^{\circ}C$) and water concentration in CO2 reached $127{\mu}mol/mol$ at dew temp ($-40^{\circ}C$. Carbon dioxide needs more wet gas than air because interaction potential of carbon dioxide shows more strong attraction than air.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.127-132
• /
• 2017

Volunteer services in communities work to provide human and material resources needed in social welfare centers and help the centers efficiently and effectively respond to diverse needs in society as well as provide quality services to clients. With this in mind, this study presents a few political suggestions on their utilization. First, potential volunteer development should be done in communities. Second, users of diverse volunteering services should be developed. Third, centers should pay attention to promotion of volunteers and the volunteers should be completely educated before services are rendered.