• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.415-423
• /
• 2021

Recently, an R-based point time series data validation system has been established for the statistical post processing and improvement of the National Center for AgroMeteorology-Land Atmosphere Modeling Package (NCAM-LAMP) medium-range prediction data. The time series verification system was used to compare the NCAM-LAMP with the AWS observations and GDAPS medium-range prediction model data operated by Korea Meteorological Administration. For this comparison, the model latitude and longitude data closest to the observation station were extracted and a total of nine points were selected. For each point, the characteristics of the model prediction error were obtained by comparing the daily average of the previous prediction data of air temperature, wind speed, and hourly precipitation, and then we tried to improve the next prediction data using Support Vector Machine( SVM) method. For three months from August to October 2017, the SVM method was used to calibrate the predicted time series data for each run. It was found that The SVM-based correction was promising and encouraging for wind speed and precipitation variables than for temperature variable. The correction effect was small in August but considerably increased in September and October. These results indicate that the SVM method can contribute to mitigate the gradual degradation of medium-range predictability as the model boundary data flows into the model interior.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.223-231
• /
• 2022

Covid-19, which has made a huge difference in our daily lives, has also brought major changes to our college education. As the class was changed from the traditional face-to-face class to a non face-to-face class, both teachers and students had difficulties in adapting, and problems such as the occurrence of academic achievement gaps due to non face-to-face classes were also raised. Therefore, this study aims to find out what attitudes students have toward non-face-to-face classes at universities caused by Covid-19. Accordingly, this study tried to identify the types of subjective perceptions college students have toward non-face-to-face classes by applying the Q methodology, and to suggest points for reference in the development and improvement of non-face-to-face classes in the future. Five types were found as a result of analysis using 30 P samples and 34 Q samples. First, learning efficiency-oriented type, second, class participation and communication-oriented type, third, non-face-to-face class active acceptance and utilization type, fourth, dissatisfaction type due to remote system and equipment operation errors, fifth, passive response type according to the situation to be. From the results of this study, it seems that it is necessary to develop an educational method for effective non-face-to-face class considering the characteristics of each type, and the merits of non-face-to-face classes, especially recorded lectures, in terms of learning efficiency, are evident. Therefore, even if face-to-face classes are conducted entirely at universities, it is believed that providing video-recorded lectures in class will be of great help to students' learning.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.383-390
• /
• 2002

System developments by components are accomplished by creating new software based on independent components having respective function. Generally, component-based software developments are expected to obtain profits caused by reuse of software, such as improvement of quality, rapid development, and efficiency of maintenance. In a component-based system, the most important goal and also key to success is to identify and construct high quality components that may increase reusability. Therefore, it is necessary for component developers to understand strong and weak points of existing component development methodologies in the aspect of identification of component, and to select the most appropriate methodology for the system to be constructed. It is also necessary for component developers to develop a new methodology enabling effective identification of independent components through modification and/or complementation of existing methodologies. The modification and complementation needs comparison and analysis of various existing methodologies. Accordingly, the this paper is to provide explanation for some widely used methodologies representing the existing component-based software development methodologies such as RUP(Rational Unified Process) of Rational company［1,9］, CBD96 of Computer Associates company［2,3］, UNIFACE of Compuware company［5］, and UML components methodology derived from extending of the component developing method of CBD96 by Cheesman and Daniels［4］. The this paper is also to point out respective problems of the representative existing methodologies. Furthermore, component identification methodologies are compared and analyzedon the whole through this paper.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.17-36
• /
• 2022

The purpose of this study is to diagnose problems in the regulation and management of Restricted Development Zone and to prepare a construction plan to convert it to a data-based monitoring system. Unlike other land-use zones, the Restricted Development Zone is a exceptional zone that prohibits all development activities other than the minimum maintenance and must be strictly controlled and managed by the local government. However, the current Restricted Development Zone management is distributed according to the conditions of each local government, and it is not possible to monitor changes in the entire Restricted Development Zone as shown in the survey results. In particular, in this study, by introducing an AI-based monitoring system, MOLIT sends the results of detecting changes across the country at regular time points(monthly and quarterly) to the local governments based on the same regulation standards, and the local governments can be trusted while inputting the regulation results into the system. To propose this methodology, first, a survey and interview were conducted with local government officials and experts. Second, we analyzed cases in which AI analysis was applied to local governments and proposed a plan to improve the efficiency of regulation work according to the introduction of the monitoring system. Third, a plan was prepared to establish a monitoring system based on the advancement of the management information system. This monitoring system can be expanded and applied to land that needs periodic regulation and management in the future, and this study tried to propose a methodology and policy for this.

• Journal of Music and Human Behavior
• /
• v.6 no.1
• /
• pp.55-80
• /
• 2009

The objective of this study was to improve the self-expression of children through Orff activities. In this study, three (3) children from D day care center in Seoul who demonstrated withdrawn behaviors were chosen as research subjects, based on a self-expression test score of 50 points. The activities were conducted for 6 weeks, totaling fourteen (14) sessions, with each session being scheduled for forty (40) minutes. Across 14 sessions, the researcher conducted, analyzed and compared the self-expression scale of subjects, measured during the third and the last session. The researcher then qualitatively analyzed verbal and non-verbal self-expression behaviors of subjects by video recording the session. The analysis results shown by the study are as follows. First, the results of a quantitative analysis of the self-expression scale showed significant changes in self expression. Furthermore, the results of a qualitative analysis of verbal self-expression showed positive changes in self-perception and an increase in feelings of independence and activity than that of initial sessions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1133-1143
• /
• 2016

The purpose of this study is to improve project performance analysis indicators for BTL sewer rehabilitation projects. Among the assessment indicators for BTL sewer rehabilitation projects, an infiltration assessment indicator is given a high score of 17.5 points as a single assessment item. This infiltration assessment indicator is assessed focusing on the amount of infiltration, and presently calculated according to 'Nighttime Domestic Flow Evaluation' method. However, this assessment indicator's failure to reflect the geological features of Jeju region is emerging as a problem in the operational stage. Thus, this study intended to compare and analyze the calculation result depending on the assessment indicators and the actual amount of infiltration, centering on Jeju region. To this end, this study analyzed the amount of infiltration in five areas of Jeju Province calculated according to 'Nighttime Domestic Flow Evaluation' method. Also, a complete enumeration survey was carried out about the conditions for actual infiltration occurrence. According to the results of this survey, ground water level is distributed lower than the level of sewer pipes. The results of a sewer pipe function test show there was no infiltration occurrence caused by sewer pipe defect. So, it is concluded that 'Nighttime Domestic Flow Evaluation' method, which is utilized for the current assessment indicator, is not appropriate to apply to Jeju region, and it is thought that there is a need to establish infiltration criteria specialized for Jeju region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.520-527
• /
• 2019

In this study, the technical level and competence of Chungbuk region manufactures were diagnosed and implications for efficiency improvement of cooperation with local universities were derived. The results are as follow. First, in Chungbuk area, 75% of the skilled workers are medium-skilled and high skilled workers. And the life cycle of production products was found to have entered middle/old age. In addition, the industries were overestimating its technology capabilities, including marketing and sales technology, and management technology. Therefore, local universities should develop differentiated program such as technology transfer and commercialization support so that companies can nurture new industries and it is necessary to improve understanding of reality and future prediction ability through various education and seminars. Second, universities in Chungbuk province have failed to meet the practical demands of industry by providing general educational programs such as lifelong education curriculum, rather than the practical training required by industry. First of all, industries needed the practical training programs such as human resource empowerment, technical education and workers' retraining for local industry development. In addition, industries were expected to provide relevant knowledge and infrastructure such as testing, analysis, participation in technology development such as commissioning and joint research. Therefore, universities should prepare customized Industry-Academia Cooperation Programs through industry demand survey in planning. Also, it is necessary to establish various connection points with industry to ensure that industry-academia cooperation will continue and achieve results. Third, the technology of the industries in Chungbuk province was found to be very unrelated to the next generation regional strategic industries. This is not shared vision between industry and local government, Industry-Academia Cooperation Programs will serve as a platform to organize various community entities. Universities will be able to play a key role in between industries and local governments.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.599-605
• /
• 2009

Changes of atmospheric pressures cause short- and long-term crustal deformations and thus become error sources in the site positions estimated from space geodesy equipments. In this study, we computed daily displacements due to the atmospheric pressure loading (ATML) at the 14 permanent GPS sites operated by National Geographic Information Institute. And the 10-year GPS data collected at those stations were processed to create a continuous time series of the height estimate. Then, we corrected for the ATML from the GPS height time series to see if the correction changes the site velocity and improves the precision of the time series. While the precision improved by about 4% on average, the velocity change was not significant at all. We also investigated the overall characteristics of the ATML in the southern Korean peninsula by computing the ATML effects at the inland grid points with a $0.5^{\circ}{\times}0.5^{\circ}$ spatial resolution. We found that ATML displacements show annual signals and those signals can be fitted with sinusoidal functions. The amplitudes were in the range of 3-4 mm, and they were higher at higher latitudes and lower at the costal area.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.140-153
• /
• 2008

The recent stagnation of construction market draw more attention to construction technology development which is believed to be playing a important role in increasing the competitiveness of the construction industry. Thus, increasing pressures has been on the government playing a catalytic role of strengthen technology competitiveness. Hereupon, this study analyzed technology skill evaluation items of the Pre-Qualification system to facilitate construction technology development at the national level and tried to show the correlation between the PQ system and patent application through multilateral analysis of patent applications. Analysis results are intended to provide basic reference in decision-making process related to governmental regulation improvement especially on the PQ system. This research also attempted to draw implications to increase the use of technology related regulations such as patent & utility model based on PQ system analysis results. To do so, a comprehensive trend Analysis on the PQ system has been conducted from the view points of construction technology. Similar analysis has been done with the patent system & Utility model system. Based on Analysis result, implications of regulation improvements was outlined to promote construction technology development, due to eventually increase the competitiveness of Korean construction industry.

• Journal of Mushroom
• /
• v.21 no.4
• /
• pp.266-269
• /
• 2023

This study aimed to address the increasing demand for technologies preventing mushroom fly damage. By monitoring the annual occurrence patterns of pests over several years and accumulating data, we conducted an analysis to evaluate the efficacy of preventive measures applied before the surge in mushroom fly infestation, typically observed in May. For preemptive control, physical measures involved installing air curtains at cultivation facility entrances and placing sticky traps and insect traps around entry points to block external entry and reduce internal insect density. Additionally, we applied an organic agricultural material, Dalmatian chrysanthemum extract, weekly alongside chemical control measures. To assess the reduction in mushroom fly populations, yellow sticky traps (15×25 cm) were placed at three locations within the mushroom cultivation facility, and the occurrence patterns before and after implementing preventive measures were compared. Compared to conventional practices, the application of preventive techniques resulted in a significant reduction, with a 60% decrease from 15 levels of mushroom flies/m² to 6 levels of mushroom flies/m² in May and a 40% decrease from 10 levels of mushroom flies/m² to 6 levels of mushroom flies/m² in June. While achieving over 50% efficacy during the peak mushroom fly season with preventive measures, we identified complementary actions such as blocking external sources (gaps in cultivation facility doors) and maintaining cleanliness around cultivation facilities (proper disposal of spent substrate) for further improvement. Comprehensive analysis and safety studies, including correlation analysis with contaminants and pathogens, are recommended to ensure the widespread adoption of mushroom fly preventive techniques for safe and stable mushroom production in the agricultural sector.