• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.45-52
• /
• 1992

In this paper, combustion characteristics and engine performance varying with blending rate of fish oil using five test fuels, e.g.pure diesel oil and four types of sardine-oil-blended diesel oils, their blending rates by weight being 20%, 40%, 60% and 80% respectively, and operating condition of engine, were investigated experimentally both in the constant volume combustion bomb and in the engine. The results are summarized as follows: 1) In the bomb, the influence of temperature on ignition delay of sardine-oil-blended diesel oils was larger than that of pure diesel oil, and it tended to increase as the blending rate of fish oil increase sardine-oil-blended diesel oils. As far as the influence of pressure on ignition delay concerns, there was no significant difference with all the test fuels. 2) In the engine, the ignition delay of fish-oil- blended diesel oils was longer than that of pure diesel oil, and it tended to increase as the blending rate increases. In the bomb, the ignition delay in high temperature showed no significant difference between with pure diesel oil and with fish-oil-blended diesel oils, and it was especially short with 60% fish-oil-blended diesel oil. In low temperature, however, the delay became longer as the blending rate increase. 3) The combustion duration was shorter with fish-oil-blended diesel oils than with pure diesel oil and it became a little shorter as the blending rate increases. 4) The rate of fuel consumption showed no significant difference between with fish-oil-blended diesel oils and with prue diesel oil, although calorific value of fish oil was lower than that of diesel oil. 5) Smoke density in exhaust gas was lower with fish-oil-blended diesel oils than with pure diesel oil and the higher the blending rate was, the lower the smoke density became.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.185-202
• /
• 2009

With the rapid development of oil and chemical industry in the late 20C, massive transportation of oil by oil tanker vessel has grown and it caused the big oil pollution accidents. When oil spill from the oil tanker, damages reach into the astronomical figures in economically and damages affect wide area and many people with break the balance of ecosystem. Recently in Korea, the oil pollution accidents has occurred frequently as growing of oil consumption and it caused large-scale damages to the victim. Oil pollution in Korea offshore takes not only Korean fisherman from their life ground and break the ecosystem but it takes too much time and money to recover. To minimize oil pollution damages, it is necessary to make pre-caution effort as a ship owner and relevant government bodies should endeavor to prevent from more damages. But once oil pollution accidents occurs in territorial sea, compensation for victim is very important. But it is true that compensation is not paid to victim smoothly. So this study aims at the problems of oil pollution compensation to the Korean victim and find the best way to get reasonable compensation.

• Korean journal of food and cookery science
• /
• v.28 no.4
• /
• pp.443-450
• /
• 2012

This study was investigated the effect of an oil-water fryer on quality properties of deep frying oil used for chicken. The acid and conjugated dienoic acid values of frying oil using an oil-water fryer were lower than those using a deep fat fryer, whereas the iodine value of frying oil using an oil-water fryer was higher than that using a deep fat fryer. The peroxide values of frying oil did not increase with frying number. Frying oil with an oil-water fryer had lower palmitic acid, stearic acid and oleic acid, and higher linoleic and linolenic acid contents than those with a deep fat fryer. The contents of trans-fatty acids in frying oil using a deep fat fryer and oil-water fryer after frying 110 chickens were 0.75% and 0.47%, respectively. The benzopyrene contents of frying oil using a deep fat fryer and an oil-water fryer after frying 110 chickens were 2.20 and $1.61{\mu}g/kg$, respectively.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.51-59
• /
• 2023

Background: Tea tree oil has antiviral, antimicrobial and antifungal effects and Mastic oil has antifungal and anticancer effects. For synergistic effects of oils, blending oil containing a mixture of two to three oils is recommended. This study aimed to determine the antibacterial effects of Tea tree oil, Mastic oil, and Blending oil containing the two oils in a mixture, to verify and suggest the potential use of these oils as a substance to prevent dental caries. Methods: Tea tree oil, Mastic oil, and Blending oil with a 1:1 blend of the two oils were diluted in liquid medium to 0% (negative control), 0.5%, 1.0%, and 2.0%. Streptococcus mutans was applied to each experimental group of the three diluted oils and after 8 h culture, the optical density (OD) was measured and the growth inhibition rate for S. mutans was estimated. Results: Tea tree oil had significantly low OD values across all concentrations (p<0.05) without significant variation among different concentrations (p>0.05). Mastic oil did not significantly vary in OD compared to the negative control across all concentrations (p>0.05) without significant variation among different concentrations (p>0.05). Blending oil, compared to the negative control, did not significantly vary in OD at 0.5% (p>0.05) but significant variation was found as the concentration increased (p<0.05). Additionally, for Tea tree oil and Mastic oil, the growth inhibition rate showed no significant variation according to concentration (p>0.05), whereas for Blending oil, the growth inhibition rate for S. mutans showed a significant difference at 1.0% (p<0.05) and at higher concentrations. Conclusion: Blending oil containing a Tea tree oil and Mastic oil demonstrated a significant growth inhibition effect on S. mutans from the concentration of 1.0%, which suggested its potential use as an effective antibacterial agent for dental caries.

• Journal of Nutrition and Health
• /
• v.29 no.7
• /
• pp.703-712
• /
• 1996

This study planned to compare the effects of source and amount of dietary n-3 fatty acid, tuna oil and perilla oil, on lipid metabolism and eicosanoids production in Spargue-Dawley strain male rats. Weaning rats were fed 5 different experimantal diets for 4 weeks. (S : beef tallow 50%+sesame oil 50%, T1 : beef tallow 50%+sesame oil 40%+tuna oil 10%, T2 : beef tallow 50%+sesame oil 25%+tuna oil 25%, P1 : beef tallow 50%+sesame oil 40%+perilla oil 10%, P2 : beef tallow 50%+sesame oil 25%+perilla oil 25%) Food intake was higher in T2 group than in other groups, but body weight gain and food efficiency tate were not different among groups. Plasma total lipid and triglyceride were significantly lower in groups fed perilla oil as much as groups fed tuna oil than in S. But tuna oil reduced plasma cholesterol level more than perilla oil. Liver total lipid per unit, cholesterol and triglyceride were not affected by dietary fat sources. Peroxisomal $\beta$-oxidation was higher in T1 and T2 than in P1 and P2. Activities of glucose 6 phosphate dehydrogenase and malic enzyme were lower in T1 and T2 than in group fed sesame oil only. Plasma TXB2 was affected by n-3 fatty acid consumption, and it was lower in perilla oil groups as much as tuna oil groups than in S. But 6-keto PGF1$\alpha$ was not different among experimental groups. The results of this study indicated that tuna oil and perilla oil both decreased plasma lipids, however, the mechanism may be different. And tuna oil and perilla oil had a similar effects on eicosanoids production.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.3
• /
• pp.88-93
• /
• 2009

Lubricant oil is needed in air conditioning and refrigeration system because the compressor requires oil to prevent surface to surface contact between its moving parts, to remove heat, to provide sealing, to keep out contaminants, to prevent corrosion, and to dispose of debris created by wear. Thus, the oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics have been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$ at 50 bar and $70^{\circ}C$ to $90^{\circ}C$ at 80 bar. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.253-255
• /
• 2015

Crude oil is the world's most actively traded commodity and also one of the most significant resources in the world. The impact of oil price volatility has great influences on macroeconomic activities. This presentation is to review and analyze the oil price fluctuation and to examine the effects especially on the offshore oil production and thereafter to look over the challenges and opportunities in this sector focusing on the petroleum logistics.

• Journal of Food Hygiene and Safety
• /
• v.8 no.3
• /
• pp.151-155
• /
• 1993

Since there have been no method which can applicable to the screening of commercial sesame oil adulterated with other vegetable oils, the present investigation was carried out particularily focusing on the the pattern of IN absorption of sesame oil and other vegetable oils. For this, a variety of oil samples prepared by the conventional method from sesame seeds, perilla seeds, com, soybean, and rice bran were analyzed by IN spectrophotometer. IN spectra of sesame oil and oil of unheated sesame seeds showed absorption peaks at 215, 230 and 290 nm. While UV spectra of com oil, perilla oil and soybean oil all showed absorption peaks at 215, 230 and 280 nm, that of rice bran oill showed peaks at 215, 290 320 nm. When sesame oil was mixed with com oil, perilla oil or soybean oil, respectively, from which the absorbance of peaks at 290 nm were lower than pure sesame oil. The peak at 320 nm which was typical absorption peak of rice bran oil was still observed in the spectnun of mixture of sesame oil with rice bran oil.

• Journal of Nutrition and Health
• /
• v.20 no.4
• /
• pp.237-245
• /
• 1987

Young male rats were fed for 10 and 20 days on different low-fat experimental diets ; 4% lard + 4% soybean oil, 4% sardine oil + 4% lard, 4% sardine oil with vitamin E+ 4% lard, 4% sardine oil with vitamin E+ 4% soybean oil. Lipid peroxide levels in liver were significantly higher in the sardine oil groups but the addition of vitamin Ehad no effects on the lipid peroxide values. Serum total cholesterol showed no significant difference among the groups but HDL-cholesterol in serum was increased in the sardine oil groups. However, the contents of serum triglyceride and phospholipid were unaffected by the replacement with sardine oil.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.