• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.1007-1013
• /
• 2003

As environmental restriction kas continuously become more strict, machining technology has emphasized on development of environment-friendly technology. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on workers health and working environment. In this study, compressed cold air was used as a replacement for conventional cutting fluids. The cooling effect on cutting tool was analyzed using the finite element method and the computational fluid dynamics. This study focused on the temperature simulation of cutting tool by real flow analysis of cold air. The maximum flow rate and the minimum temperature of compressed cold air are 300ι/min and -30$^{\circ}C$ respectively. To compare the simulation and experimental results, inner temperature of the cutting tool was measured with the thermocouple embedded in the insert. The results show that the analysis of cutting temperature using FEM and CFD is resonable, and the replacement of cutting fluid with cold air is available.

• Journal of Chest Surgery
• /
• v.27 no.4
• /
• pp.266-271
• /
• 1994

Between 1985 and 1993, 29 children from 1 to 15 years of age have undergone cardiac valve replacements at Buchon Sejong Hospital. The patients were composed of 20 males and 9 females and 17 patient had congenital heart disease and 12 patients had acquired heart disease. Two of these patients have had second valve replacements due to paravalvular leakage and valve thrombosis. Single valve replacements were 29 and double valve replacements were 2. All the patients had received prosthetic valves except one. Among the 25 patients who had definite post-operative records, the overall mortality was 12%[4% was early mortality and 8% was late mortality].25 patients were followed up with coumadin anticoagulation for total 633 patient-months[minimum 2 months to maximum 93 months, mean 25.3 months] and actuarial survival rate was 88.5 $\pm$ 6.3% at 7 years and event free rate was 70.3 $\pm$ 11.7% at 7 years. These results suggest that pediatric valve replacements can now be performed at a low operative risk although various problems are still remained and the choice of valve is prosthetic valve mainly due to its durability at the present time.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.741-762
• /
• 2015

This study examines the long-term prospects for a minimum living guarantee by public pensions for the elderly using a dynamic micro-simulation model. "Elderly poverty" here is an estimate calculated by considering only the public pension income and it means how public pension affects the minimum living guarantee for the elderly. The main results are: First the impact of the public pension system on elderly poverty can be decomposed into economic growth and institutional effect. When considering both effects, the absolute poverty rate of the elderly will be reduced to 20% by the year 2040. But when considering the institutional effect(except economic growth effect), that rate is expected to be a long-term level of around 90%. Second, even if the Basic Pension is indexed to 10% of A-value, the elderly poverty rate is only about 10%p to be reduced further, compared to the current CPI-indexed system. Third, current benefit formula for National Pension does not consider the actual correlation of income level and insured period; consequently, the reversal possibility of the replacement rate appears likely. Fourth, the reform of 2007 improves the sustainability of the National Pension; however, it deteriorates the adequacy of the pension policy, i.e., the past system would be better than the current system in regards to a reduction in elderly poverty. Further discussion is needed on aspects of correct pension reform assessments which is difficult to achieve without understanding the comprehensive benefits and costs to society.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.98-98
• /
• 2003

Recently, human embryonic stem (hES) cells have become very important resources for ES cell basic research, cell replacement therapy, and other medical applications; thus, efficient cryopreservation methods for these cells are needed. This study examined whether a newly developed minimum volume cooling (MVC) vitrification method, which was tested through cryopreservation of sensitive bovine oocytes, can be used for freezing hES cells. Feeder-free cultured hES cell (MB03) colonies were mechanically dissected into several small clumps following enzymatic treatment. We compared the freezing efficiency of a slow-cooling method using a cryo-module (0.4-0.6C/min, 20-30 clumps/vial) and MVC vitrification using a modified 0.5-ml French mini-straw designated as a MVC straw (>$20,000{\circ}C$/min, 10 clumps/straw) After thawing, in vitro survival of hES cell clumps was higher for MVC-vitrified cells (80.8%, 97/120) than for slow-cooled cells (38.2%, 39/102). Further, the proliferation rate of surviving MVC-vitrified cells was similar to that of control hES cells from 2 weeks after thawing. In addition, vitrified-thawed hES cells demonstrated a normal karyotype, were positively immunostained for surface marker antibodies (AP, SSEA-4 and TRA-1-60) and the Oct-4 antibody, and could differentiate into all three embryonic germ layer cells in vitro. This result demonstrates that hES cell clumps can be successfully cryopreserved by a newly developed MVC vitrification method without loss of human cell characteristics.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.1
• /
• pp.35-44
• /
• 2020

Design techniques for the deep mixing method, one of the soft ground improvement methods, include two ways to interpret the ground as composite ground and pile ground. However, since comparative studies on these two approaches are insufficient, it is difficult to clearly define the analysis criteria in the design. In this study, two-dimensional and three-dimensional analyses have been performed with different conditions. The three conditions, the embankment height, depth of soft ground, and replacement ratio of reinforcement zones were varied and the analysis was performed on the basis of the assumption of composite ground and pile ground for each condition. As a result, the minimum depth of improvement in the two-dimensional analysis was deeper by 6.85~9.08% than in the three-dimensional analysis. The pile ground analysis showed that the depth of improvement was deeper by 12.22~14.45% than the composite ground analysis. Based on these results, it is concluded that for more accurate design, three-dimensional analysis should be performed rather than two-dimensional analysis. also, it is judged that necessary to analyze the ground as composite ground for economical design, and as the pile ground analysis for stable design.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.199-200
• /
• 2006

PM recent developments focus on increasing this technology's competitiveness when compared to wrought materials. Warm compaction allows the replacement of a double press double sinter process with a single warm press and sintering step, thus allowing cost and time savings. Moreover there are added benefits to consider such as reducing work in process and lessening part's logistics cost. This paper presents a successful industrial trial to replace a double press-double sinter process with a warm die compaction and sintering process. The part chosen was a high performance gear containing 0,9% wt. carbon. Sintering was conducted in a belt furnace at $1120^{\circ}C$ in a nitrogen rich atmosphere with rapid cooling process in order to obtain a quasi fully martensitic structure with a minimum of 700HV0,1 and 450HV10 after annealing. The balance between properties and cost is favoured by the use of a singular lubricant developed in a Eureka frame project together with POMETON S.A. and die warm compaction. Warm compaction is only needed to be effective on the gear teeth, in order to achieve the required properties. Therefore only the die is actually heated. This simplified system avoids flow rate problems typically involved when using more elaborate warm compaction equipments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.243-251
• /
• 2010

The military has been putting great efforts into applying data communication on existing voice communication systems being used in NCW(Network Centric Warfare). Data communication will be an effective choice in one of many effort to yield a minimum kill chain, comparing to legacy voice communications, when tactical units conduct their missions. However, the required budget will be enormous, in case of the replacement of a lot of legacy communication systems with new one. As a cost-effective alternative, the tactical data communication systems using the conventional radio systems instead of the development of new radio systems has been proposed. It is mandatory, though, to ensure QoS while maintaining data communication by making use of legacy radio systems already in use. This paper focuses on the performance issues experimented and analyzed for tactical data communication through the legacy radio systems as the first step towards guaranteed QoS. We have conducted various experiments such as the transmission error rate on certain tactical messages, performance evaluation of redundant transfers, the relationship between the transmission frame size and rate of error, the identification of error points in the transmission frame, and techniques to reduce the errors in both hopping and non-hopping modes. As a result of the performance experiments, The adaptive communication module which decides the redundant transmission or the Forward Error Correction(FEC) technique by analyzing channel status and current transmission status(hopping/non-hopping) of the legacy radio should be designed. the FEC technique in non-hopping, and the redundant transmission technique in hopping mode was recommended from the result of experiment with the frame size is 20bytes in non-hopping and 10Bytes frame size in hopping mode.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.

• International Journal of Highway Engineering
• /
• v.20 no.4
• /
• pp.21-26
• /
• 2018

PURPOSES : The objective of this study is to evaluate the application of soil stabilization method for soft shoulder construction in the iRoad Project of Sri Lanka. METHODS : Firstly, the quantitative analysis of soil strength improvement due to soil stabilization was done for soil samples collected from iRoad construction sites. Two types of soils were selected from iRoad Project sites and prepared for soil stabilization testing by the Road Development Authority. Secondly, the appropriate stabilizer was selected at given soil type based on test results. Two different stabilizers, ST-1 and ST-2, produced in Korea were used for estimating soil strength improvements. Finally, the optimum stabilizer content was determined for improving shoulder performance. The uniaxial compressive strength (UCS) test was conducted to evaluate the strength of stabilized soil samples in accordance with ASTM D 1633. The use of bottom ash as a stabilizer produced from power plant in Sri Lanka was also reviewed in this task. RESULTS : It is found from the UCS testing that a 3% use of soil stabilizer can improve the strength up to 2~5 times in stabilized soft shoulder soils with respect to unstabilized soils. It is also observed from UCS testing that the ST-1 shows high strength improvement in 3% of stabilizer content but the strength improvement rate with increase of stabilizer content is relatively low compared with ST-2. The ST-2 shows a low UCS value at 3% of content but the UCS values increase significantly with increase of stabilizer content. When using the ST-2 as stabilizing agent, the 5% is recommended as minimum content based on UCS testing results. Based on the testing results for bottom ash replacement, the stabilized sample with bottom ash shows the low strength value. CONCLUSIONS : This paper is intended to check the feasibility for use the soil stabilization technique for shoulder construction in Sri Lanka. The use of soil stabilizer enables to improve the durability and strength in soft shoulder materials. When applying the bottom ash as a soil stabilizer, various testings should be conducted to satisfy the specification criteria.

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.3
• /
• pp.91-99
• /
• 2019

Purpose: This retrospective study reports the intermediate-term clinical outcomes including the practical function in daily and sports activities after total ankle arthroplasty for end-stage rheumatoid arthritis, as well as the effects of modification of perioperative anti-rheumatic medications. Materials and Methods: Twelve patients were followed for a minimum of 2 years after total ankle replacement for end-stage rheumatoid arthritis. Perioperative anti-rheumatic medications in all patients were modified based on a specific guideline. Clinical evaluations consisted of American Orthopaedic Foot and Ankle Society (AOFAS) scores, Foot and Ankle Outcome Score (FAOS), and Foot and Ankle Ability Measure (FAAM) scores. Periodic radiographic evaluation was conducted to detect changes in ankle alignment and postoperative complications. Results: Mean AOFAS, FAOS, and FAAM scores improved significantly from 37.5 to 81.2, 39.1 to 72.4, and 33.8 to 64.0 points at final follow-up, respectively (p<0.001). Functional outcomes in daily and sports activities at final follow-up were found to be 76.5 and 55.8 points for the FAOS and 70.5 and 57.5 points for the FAAM, respectively. As early postoperative complications, there was one case of local wound necrosis, one case of medial malleolar fracture, and one case of deep peroneal nerve injury. Radiological evaluation revealed two cases of asymptomatic heterotopic ossification and one case of progressive arthritis in the talonavicular joint. Reoperation was performed in only one patient (8.3%) with a medial soft tissue impingement at a mean of 35.6 months follow-up. Conclusion: Total ankle arthroplasty appears to be an effective surgical option for end-stage rheumatoid arthritis. Practical functions in daily and sports activities were significantly improved at intermediate-term follow-up. Modification of perioperative anti-rheumatic medications can be one of the solutions to reduce the postoperative complication rate.