• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.311-320
• /
• 2013

이 논문은 쉴드TBM 추진시 잭킹 force에 의한 세그먼트 두께의 영향에 대한 현장사례연구이다. 이 연구를 위하여 조사현장의 지반 특성에 대하여 분석하고 현장 조사 자료를 통한 쉴드TBM공사시 문제점에 대하여 분석하였다. 실질적으로 잭킹에 의한 터널 추진시 세그먼트가 부분적으로 파손된 것으로 추측되었다. 이에 따라 세그먼트의 파손에 대하여 조사하였으며, 파손 원인에 대하여 다각적으로 수치 해석적 및 이론적으로 평가를 실시하였다. 결과로부터 파손의 주원인들은 잭킹 시스템과 세그먼트의 두께가 얇은데 있다는 것으로 추측되었다. 추가로 연구 결과를 근거로 향후 얇은 세그먼트의 안전한 설치를 위한 추진 잭킹 방법에 대하여서도 제안하였다.

• Geomechanics and Engineering
• /
• 제29권4호
• /
• pp.471-486
• /
• 2022

The effect of segmental joints is one of main importance for the segmental lining design when tunnels are excavated by a mechanized process. In this paper, segmental tunnel linings are analyzed by two numerical methods, namely the Beam-Spring Method (BSM) and the Solid-Interface Method (SIM). For this purpose, the Tehran Subway Line 6 Tunnel is considered to be the reference case. Comprehensive 2D numerical simulations are performed considering the soil's calibrated plastic hardening model (PH). Also, an advanced 3D numerical model was used to obtain the stress relaxation value. The SIM numerical model is conducted to calculate the average rotational stiffness of the longitudinal joints considering the joints bending moment distribution and joints openings. Then, based on the BSM, a sensitivity analysis was performed to investigate the influence of the ground rigidity, depth to diameter ratios, slippage between the segment and ground, segment thickness, number of segments and pattern of joints. The findings indicate that when the longitudinal joints are flexible, the soil-segment interaction effect is significant. The joint rotational stiffness effect becomes remarkable with increasing the segment thickness, segment number, and tunnel depth. The pattern of longitudinal joints, in addition to the joint stiffness ratio and number of segments, also depends on the placement of longitudinal joints of the key segment in the tunnel crown (similar to patterns B and B').

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.695-702
• /
• 2015

원심모형시험은 최근의 기계적, 이론적 발전에 따라 그 활용도와 정확성이 높아지고 있다. 원심모형시험은 원지반 응력을 효과적으로 재현할 수 있으므로 주위 지반 또는 암반과 상호작용을 하는 터널과 같은 지하구조물의 거동을 모사하기 적합하다. 본 연구에서는 병렬 터널의 지진시 동적 거동을 원심모형시험을 통하여 분석하였다. 터널 모델링시 지진에 의해 발생하는 최대 가속도 저감을 위하여 Flexible segment를 고려하였으며 Flexible segment의 두께가 얇은 경우와 두꺼운 경우를 각각 고려하였다. 시험 결과 Flexible segment의 지진시 터널 구조물에 발생하는 최대 가속도 저감 효과를 확인하였다. 그러나 Flexible segment가 얇은 경우 단주기파 적용시 최대가속도의 저감효과는 없었고, 두꺼운 경우 기반암 가속도가 클 경우 보다 효과적임을 확인하였다. 또한 동일 모델에 대하여 3차원 수치해석을 수행하여 지진시 거동을 파악한 결과, 시험 결과와 유사한 경향을 보임을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.715-728
• /
• 2022

A new type of buckling-restrained braces (BRBs) with a longitudinally profiled steel plate working as the core (LPBRB) is proposed and experimentally investigated. Different from conventional BRBs with a constant thickness core, both stiffness and strength of the longitudinally profiled steel core along its longitudinal direction can change through itself variable thickness, thus the construction of LPBRB saves material and reduces the processing cost. Four full-scale component tests were conducted under quasi-static cyclic loading to evaluate the seismic performance of LPBRB. Three stiffening methods were used to improve the fatigue performance of LPBRBs, which were bolt-assembled T-shaped stiffening ribs, partly-welded stiffening ribs and stiffening segment without rib. The experimental results showed LPBRB specimens displayed stable hysteretic behavior and satisfactory seismic property. There was no instability or rupture until the axial ductility ratio achieved 11.0. Failure modes included the out-of-plane buckling of the stiffening part outside the restraining member and core plate fatigue fracture around the longitudinally profiled segment. The effect of the stiffening methods on the fatigue performance is discussed. The critical buckling load of longitudinally profiled segment is derived using Euler theory. The local bulging behavior of the outer steel tube is analyzed with an equivalent beam model. The design recommendations for LPBRB are presented finally.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.634-639
• /
• 2011

This paper presents a study on the design parameters that consider the magnetic saturation effect in a rotor core of a synchronous reluctance motor. Two important design parameters in a rotor are selected to analyze the saturation effect of a synchronous reluctance motor, particularly in a rotor core. The thickness of the main segment, which is the main path of the d-axis flux, and the end rip, which affects the q-axis flux, are analyzed using the d-axis and q-axis inductances. Moreover, the characteristics of torque and torque ripple when magnetic saturation takes place are analyzed. The saturation effect is verified by comparing the reluctance torque between the experiment and FEM simulation.

• Journal of Acupuncture Research
• /
• 제23권6호
• /
• pp.207-219
• /
• 2006

Objectives : This study was to investigate the effect of low frequency electro-acupuncture (EA) at ST36 acupoint on the Freund's Complete Adjuvant(FCA)-induced arthritis in rats. Methods : Arthritis was induced by intradermal injection of FCA into base of tail. Experimental groups were divided into 4 groups; Normal, Control, ST36 and Non-Acupoint(NA). ST36 group was treated by 2 Hz EA at ST36 acupoint. Body weight, paw edema volun1e and ankle joint thickness were measured after treatment. And we investigated the effects of 2 Hz EA via WBC count, segment neurophil, lymphocyte, PGE2 assay and NADPH-d histochemistry. Results and Conclusion : The mean of body weight and ankle joint thickness of ST36 group was increased compared with control group. The mean of paw edema volume, WBC count, segment neutrophil and lymphocyte of were not decreased with control group. The mean of PGE2 concentration and NADPH-d positive neurons were changed significantly compared with control group.

• 대한토목학회논문집
• /
• 제35권2호
• /
• pp.387-396
• /
• 2015

기존 쉴드터널은 일률적으로 비배수 개념이 적용되고 있지만 시공 및 운영 과정에서 고질적인 누수 발생이 문제가 되고 있으며, 쉴드 세그먼트의 경우 토압 및 수압까지 고려한 설계로 인해 단면이 과다하게 증가되고 세그먼트 재료비 상승을 유발하고 있다. 이러한 문제점들을 개선하기 위해 쉴드터널에 배수 개념을 적용한 부분배수형 쉴드터널에 대한 연구가 진행되고 있다. 본 연구에서는 부분배수 쉴드터널의 적용 가능성을 평가하기 위해 축소모형실험을 통해 배수 및 비배수 조건에서의 토압 및 수압 변화를 측정하였다. 실험 결과를 통해 도출된 수압 저감 효과를 바탕으로 지하수위 아래 위치한 쉴드터널 설계사례에 적용하여 구조 안정성을 검토하였고, 수압 저감을 통한 세그먼트 단면 축소 효과에 대해 평가하였다.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.107-113
• /
• 2015

The goal of this paper is to investigate structural integrity factors of RMI(reflective metal insulation) to confirm the design requirements in nuclear power plant. Currently, a glass wool insulation is using now, but it will gradually be replaced with the reflective metal insulation maded by stainless steel plates. The main function of an insulation is to minimize a heat loss of vessel and pipes in RCS(reactor coolant system). It has to maintain structural a integrity in nuclear power plant life duration. In this study, the structural integrity analysis was carried out both multi-plate and outer shell plate by using a static analysis and experimental test. First, inner multi-plate has a self support structure for being air space. Because the effect of total static weight in multi-layer plate is low, a plate collapse possibility is not high. Considering optimum thin plate pressing process, it has to pre-check the basic physical properties. Second, the outer segment thickness and stiffener shape are verified by the numerical static analysis, and sample test for both type of panel and cylindrical pipe model.

• Journal of Acupuncture Research
• /
• 제24권2호
• /
• pp.187-201
• /
• 2007

Objectives: This study was to investigate the effect of high frequency electro-acupuncture (EA) at $ST_{36}$ acupoint on the Freund's Complete Adjuvant (FCA)-induced arthritis in rats. Methods : Arthritis was induced by intradermal injection of FCA into base of tail. Experimental groups were divided into 4 groups; Normal, Control, $ST_{36}$ and Non-Acupoint (NA). $ST_{36}$ group was treated by 120Hz EA at $ST_{36}$ acupoint. Body weight, paw edema volume and ankle joint thickness were measured after treatment. And we investigated the effects of 120Hz EA via WBC count, segmen neurophil, lymphocyte, PGE2 assay and NADPH-d histochemistry. Results and Conclusions : The mean of body weight and ankle joint thickness of $ST_{36}$ group was increased compared with control group. The mean of paw edema volume, WBC count, segment neutrophil and lymphocyte of were not decreased with control group. The mean of PGE2 concentration ($1,851.00{\pm}160.11$) and NADPH-d positive neurons ($13.12{\pm}1.23$) were changed significantly (p

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1140-1141
• /
• 2006

Diamond tools with several layers of diamond grits through thickness direction were tested by sawing. The saw blades with evenly distributed grits showed better cutting performance compared to the random distributed saw. At a given concentration of grits, as the spacing between layers was increased, the cutting performance was improved, and as decreased, it showed more tool life