• 대한환경공학회지
• /
• 제39권3호
• /
• pp.140-148
• /
• 2017

강우 초기 표면 유출에 의해 지표수로 전달되는 비점오염물질을 저감하기 위하여 고안된 초기우수처리 장치의 효율을 분석하였다. 장치는 파일럿 규모로서 실험실 수준의 분석 결과에 근거하여 설계되었다. 강우시 사전에 설정된 조건들에 따라 실험 장치로 채수를 실시하였으며, 24시간 동안 정치하여 침강에 의해 오염물질을 제거한 상등수의 수질을 측정하여 효과를 분석하였다. 총 9번의 강우에 대하여 평균적인 제거 효율은 총고형물질(Total Suspended Solid, TSS), 총인(Total Phosphorus, TP) 그리고 총질소(Total Nitrogen, TN)에 대하여 각각 87.4%, 75.3% 및 43.6%로 나타났다. 초기 강우 유출수 오염물질의 농도는 강우량과 강우강도가 증가함에 따라 증가되는 것으로 분석되었다. 이는 강우 초기 각 오염물질의 고형물질의 분율이 더 크기 때문인 것으로 판단된다. 본 연구에서는 초기 강우시 발생하는 유출수에 의한 오염부하의 상당부분을 단순한 침강만으로 효과적으로 제거할 수 있다는 것을 검증하고자 하였으며, 특히 추가의 동력이나 화학물질의 투입 없이도 고형물질 분율이 높은 TSS와 TP의 제거 효율이 우수한 것으로 나타났다.

• 한국물환경학회지
• /
• 제33권2호
• /
• pp.123-129
• /
• 2017

The purpose of this study is to identify potential methodologies to reasonably estimate the effectiveness of road vacuum cleaning in terms of pollution loads reduction. In this context, this study proposes two empirical equations to estimate the amount of diffuse pollution loads removed by road vacuum cleaning. The proposed equations estimate the removed amount of pollution loads respectively taking into consideration of: a) the distance of road vacuum cleaning; and b) the amount of road-deposited sediment(RDS). All of the parameters in these equations were evaluated based on results of field monitoring and laboratory analyses, except for the RDS generation rate. The results of this study suggest that pollutant removal efficiency is 46.3% for $BOD_5$ and 56.4% for TP; discharge ratios for particulate and dissolved $BOD_5$ are 35.0% and 21.2%, respectively; discharge ratios for particulate and dissolved TP are 35.0% and 19.4%, respectively. Average concentrations of pollutants in RDS are $BOD_5$ 977.3 mg/kg and TP 317.6 mg/kg. Some results of a case study imply that both equations can be potentially useful if the adopted parameters are reasonably evaluated. In particular, the RDS generation rate should be evaluated based on monitoring data collected from various road conditions.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.49-58
• /
• 2014

PURPOSES : In areas of high traffic volume, such as expressway across large cities, the amount of nitrogen oxides (NOx) emitted into the atmosphere as air pollution can be significant since NOx gases are the major cause of smog and acid rain. Recently, the importance of NOx removal has arisen in the world. Titanium dioxide ($TiO_2$), that is one of photocatalytic reaction material, is very efficient for removing NOx. The NOx removing mechanism of $TiO_2$ is the reaction of solar photocatalysis. Therefore, $TiO_2$ in road structure concrete need to be contacted with ultraviolet rays (UV) to be activated. In general, $TiO_2$ concretes are produced by replacement of $TiO_2$ as a part of concrete binder. However, considerable portion of $TiO_2$ in concrete cannot contact with the pollutant in the air and UV. Therefore, $TiO_2$ penetration method using the surface penetration agents is attempted as an alternative in order to locate $TiO_2$ to the surface of concrete structure. METHODS : This study aimed to evaluate the NOx removal efficiency of photocatalytic concrete due to various $TiO_2$ application method such as mix with $TiO_2$, surface spray($TiO_2$ penetration method) on hardened concrete and fresh concrete using surface penetration agents. The NOx removal efficiency of $TiO_2$ concrete was confirmed by NOx Analyzing System based on the specification of ISO 22197-1. RESULTS : The NOx removal efficiency of mix with $TiO_2$ increased from 11 to 25% with increasing of replacement ratio from 3 to 7%. In case of surface spray on hardened concrete, the NOx removal efficiency was about 50% due to application amount of $TiO_2$ with surface penetration agents as 300, 500 and 700g/m2. The NOx removal efficiency of surface spray on fresh concrete due to all experimental conditions, on the other hand, which was very low within 10%. CONCLUSIONS : It was known that the $TiO_2$ penetration method as surface spray on hardened concrete was a good alternative in order to remove the NOx gases for concrete road structures.

• 한국환경과학회지
• /
• 제26권3호
• /
• pp.401-410
• /
• 2017

This study analyzed the changes in the concentrations of organic matters in constructed treatment wetlands, coming from discharge water from a sewage treatment plant and non-point pollutant sources during rainfall events. At the beginning of a rainfall event, a massive amount of particulate organic matter flowed in, and was removed from the sedimentation basin (S1, S2); dissolved organic matter was removed after passing through stepwise treatment processes in the wetland. During dry period in the wetland, the removal efficiency rate for COD and TOC was -21 and -7%, respectively; during the rainfall event, the removal efficiency rate for COD and TOC were 47 and 43%, respectively. The highly-concentrated organic matters that flowd in at the beginning of the rainfall event was stabilized by various structures in the wetland before water discharge. Cyanobacteria blooms annually at the confluence of the So-ok stream and Daecheong Lake. Therefore, it is expected that the wetland will contribute significantly to reducing cyanobacteria and improving water quality in the area.

• 한국환경과학회지
• /
• 제10권6호
• /
• pp.393-399
• /
• 2001

This study was carried out to evaluate the pollutant removal efficiencies of the advanced drinking water treatment using ozonation. for raw water, Nakdong River was used. By conducting batch ozonation test, the following results were obtained. when ozone dosage of 5mg/$\ell$was used, preozonation of raw water reduced turbidity, KMnO$_4$consumption, DOC(dissolved organic carbon), UV254 absorbance, THMFP(trihalomethane formation potential) as much as 3.9NTU, 5.5mg/$\ell$, 1.15mg/$\ell$, 0.112 and 0.065mg/$\ell$, respectively. In case of postozonation of sand filtered water, water quality was also improved with decrease in turbidity, KMnO$_4$consumption, DOC, UV254 absorbance and THMFP at the amount of 0.08NTU, 2.6mg/$\ell$, 0.88mg/$\ell$, 0.042 and 0.018mg/$\ell$, respectively. On the other hand, contents of dissolved oxygen increased at the level of 1.3mg/$\ell$ after preozonation process and 1.0mg/$\ell$ after postozonation process. The effect of ozone dosage was higher than that of its contact time for the removal of the pollutants.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.439-449
• /
• 2015

Carbolic Acid which is called phenol is one of the important starting and/or intermediate materials in various industrial processes. However, its excessive release into environment poses a threat to living organisms, as it is a highly carcinogens and hazardous pollutant even at the very low concentration. Thus removal of phenol from polluted environments is very crucial for sustainable remediation process. We developed a low cost adsorption method for separating phenol from a model aqueous solution. The phenol adsorption was studied using two adsorbents i.e., Amber lite XAD-16 and Amber lite XAD-7 HP with a constant amount of resin 0.1 g at varying aqueous phenol concentrations ($50-200mgL^{-1}$) at room temperature. We compared the efficacy of two phenol adsorbents for removing higher phenol concentrations from the media. We investigated equilibrium and kinetics studies of phenol adsorption employing Freundlich, Temkin and Langmuir isotherms. Amberlite XAD-16 performed better than Amberlite XAD-7 HP in terms of phenol removal efficiency that amounted to 95.52%. Pseudo second order model was highly fitted for both of the adsorption systems. The coefficient of determination ($R^2$) with Langmuir isotherm was found to be 0.98 for Amberlite XAD-7 HP. However, Freundlich isotherm showed $R^2$ value of 0.95 for Amberlite XAD-16, indicating that both isotherms could be described for the isotherms on XAD-7 HP and Amberlite XAD-16, respectively.

• 환경위생공학
• /
• 제20권1호
• /
• pp.32-39
• /
• 2005

Recently, sanitary landfill was one of the most widely used for disposal of waste in Korea. With increasing of use and public awareness of this method for disposal. there is an increased concern with respect to the pollution potential by the landfill leachate. Especially, an aged landfill leachate contained relatively large amount of the nonbiodegradable substances which could not be removed by biological treatment processes. So, this study was conducted to the removal of nonbiodegradable substances, such as Humic acid and Fulvic acid with the electrolysis. In this study, electrode materials, electrolyte concentration, electrode distance, current density, and pH value were found to have significant effect on both pollutant removal efficiency and current efficiency in electrochemical oxidation process.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.428-435
• /
• 2015

This study was carried out to evaluate the performance of a inflow controller for the control of combined sewer overflows (CSOs). Because of the inflow controller could be adjusted manually by predicting the maximum amount of peak flow, the mechanical adjustment of this controller was higher than the existing fixed-type controller in field application. Standardizing the relationship between the flow and the clearance and angle of an inlet cover plate on the inflow conditions can selected to the optimum conditions for the on-site. It was concluded that BOD pollutant loading at the region in which inflow controller was installed had shown the removal efficiency rate of 42%.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.67-83
• /
• 1999

The objective of this study is development of low emission pulverized coal combustor for reducing pollutant emission generated from coal combustion. Low emission combustion technology for reducing NOx and fly ash was investigated by using 2 stage coaxial cyclone combustor. Staged combustion was employed for NOx reduction and high temperature slagging combustion was also studied for fly ash removal in the combustor. The result of this study shows that the low emission combustion system can reduce the amount of atmospheric pollutions with improved boiler efficiency and performance.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.1-6
• /
• 2016

In this year, Koreans have a shortage in agricultural and drinking water due to severe algal blooms generated in major lakes. Waste oyster shells were obtained from temporary storage near the workplace at which oysters were separated from their shells. Heating ($1000^{\circ}C$ for 1 h in air) was employed to convert raw oyster shell powders into calcium oxide powders that reacted efficiently with phosphorus and nitrogen to remove algal blooms from eutrophicated wastewater. As the dispersed amount of heated oyster shell powders was increased, water clarity and visual light penetration were improved. Coagulation, precipitation and carbonation process of the heated oyster shell powders in a water purifier facilitated removal of eutrophication nutrient such as phosphorus and nitrogen, which is both beneficial and economically viable. $CO_2$ implantation by carbonation treatment not only produced thermodynamically stable CaO in oyster shells to derive precipitated calcium carbonate (PCC) but also accelerated algal removal by activation of coagulation and precipitation process. The use of oyster shell powders led to a mean reduction of 97% in total phosphate (T-P), a mean reduction of 91% in total nitrogen (T-N) and a maximum reduction of 51% in chemical oxygen demand (COD), compared with the total pollutant load of raw algal solution. Remarkable water quality improvement of algal removal by heated oyster shell powders and PCC carbonation treatment will allow utilization as water resources to agricultural or industrial use.