• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.3
• /
• pp.152-157
• /
• 2004

Wave energy distribution along the Korean coastal sea area was analysed based on the calculated wave data at KORDI. The wave data for the analysis is for the last 24 years (1979∼2002) and the model is HYPA and WAM using known wind field. The wave energy or wave power was evaluated based on the linear wave theory with a simple wave period assumption. The results shed some idea on the amount of usable wave energy and the sites of higher efficiency. It is fair to say that 3kw/m wave energy is easily observable and 10kw/m is frequently available depending on the season and location. The south west region of Jeju island is believed to have the highest overall wave energy density.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.105-110
• /
• 2011

The objective of this study is to analyze the characteristic of radiation environment in the urban and rural through the field observation in the summer. The radiation balance was compared through the measurement of the shortwave radiation and long-wave radiation in the urban, sub-urban, and rural. The following conclusion could be obtained from this research. (1) In the results of observation including the rain-day, it was found that the short wave radiance in the urban is lower about 10% than the rural. (2) The upper part of atmosphere layers in the urban area absorb much short wave radiation energies compared with the rural relatively. It can increase the temperature of the upper part of atmosphere layers and the emittance of long wave radiation. (3) The ratio of the downward short wave radiation to the downward long wave radiation was 1.24 for the urban, 1.28 for sub-urban and1.35 for rural. It can be estimated that the atmosphere condition of the rural is better than that of other areas.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.383-388
• /
• 2014

This paper describes a wave modeling method using low-cost sensors. Wave modeling is applied to the wave monitoring system for accurate measurement of ocean wave parameters. The observation of ocean wave parameters is necessary to improve the accuracy of forecast of ocean wave condition. However, the ocean wave parameters measured by a low-cost wave monitoring system suffer from several errors. Therefore we introduce a wave modeling method to compensate the ocean wave parameters corrupted by errors. The proposed method is analyzed using experiments within controlled environment. It is verified that the accuracy of low-cost wave monitoring system can be increased by the proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.1-6
• /
• 2012

Recent trend of pursuing smart life began to affect the usage of vehicle in real life. The next generation of the smart vehicle services start to utilize telecommunication technology and sensing techniques for the advanced safety and efficient use of road for drivers, while there's still decency in satisfaction about vehicular safety upgrade. For this purpose, a new technology is devised as Wireless Access in Vehicular Environment(WAVE). Foreign industries now are developing technologies of key components, platform and services related to WAVE. Domestic industry just starts to develop the related technologies about WAVE, although the frequency for WAVE is not allocated. This paper introduces the status of technical standards for WAVE and the status of developing components of WAVE. And this paper also proposes the guidance of frequency allocating policy for WAVE through frequency interference experiments.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.20-27
• /
• 2001

After using the filtering method, wave parameters are calculated by the spectral analysis and wave by wave analysis. Extreme environments and higher wave characteristics int he Chujeon Sea are analyzed using the observed wave data. Higher wave has been intensely emphasized as an important environmental force parameter in several recent research works. The aims of this study are to summarize the distribution of extreme environment for wind waves, and to find occurrence probability of higher wave in Chujeon Sea. Ocean wave statistics varying with sea state are found to respond linearly to the spectral peakedness parameter Qp, mean run-length and Ursell number. Although the spreading of the field results is large, it may be concluded that the tendency of wave group formation depends on the spectral peakedness parameter Qp. Extreme wave is estimated to apply various model distribution functions by using the monthly maximum significant wave parameters which can be used to the design and analysis of coastal structures.

• Geomechanics and Engineering
• /
• v.31 no.6
• /
• pp.615-622
• /
• 2022

In this paper, considering the temperature dependence of material physical parameters as well as the effects of thermal effect and shear deformation, we have conducted an in-depth study on the wave propagation of functionally graded (FG) materials circular plate in thermal environment based on the physical neutral surface concept. The dynamic governing equations of functionally graded plates are established, and the dispersion relation of wave propagation is derived. The influence of different temperature fields on the propagation characteristics of flexural waves in FG circular plates is discussed in detail. It can be found that the phase velocity and group velocity of wave propagation in the plate decrease with the increase of temperature.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.88-88
• /
• 2017

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.105-116
• /
• 2014

The objective of this study was to compare and analyze of radiation environment between downtown and suburban area by observation of short, diffuse and long-wave radiation during summer season. The followings are main results from this study. 1) The trends of long-wave radiation is increasing from May to August and the variation of daily range is decreased. It is confirmed that the temperature was closely relevant to long wave radiation. 2) During observation period, suburban area is higher than downtown the value of direct solar radiation. 3) There are much direct solar radiation in suburban area than downtown. But, it was measured much more horizontal solar radiation at the downtown area. From the this result, we can conclude that diffuse radiation play a important role at horizontal solar radiation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.189-196
• /
• 2012

A WAVE(Wireless Access for Vehicular Environment) system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. However, the scrambler bit operation of WAVE system becomes less efficient in the organizations of software and hardware design because the parallel processing is impossible. Although scrambler algorithm proposed in this paper has different processing speed depending on input data 8 bit, 16 bit, 32 bit, and 64 bit. it improves the processing speed of the operation because it can make parallel processing possible depending on the input unit.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.40-48
• /
• 1999

Wave absorbing system is needed at various kinds of wave basins (wave flume, towing tank, square tank) for the model test related to the ocean engineering. In this paper, the performance of wave absorbing system with new concept is estimated throughout the experiments. Herein, the wave absorbing system is designed by punching plate with a given porosity which is installed horizontally and submerged near the water surface. As the incident wave generated by a wave maker advances above a punching plate, the strong jet flow is formed near a hole of punching plate. As a result, wave energy is dissipated into heat energy, Systematic model tests were conducted at KRISO to verify the performance of the wave absorber using a punching plate. It was found that the reflection coefficient of wave absorber is deeply dependent on both the porosity and the submerged depth of a punching plate. Inclined installation of a punching plate shows better performance than a horizontal one within a certain inclined angle.