• 한국실내디자인학회논문집
• /
• 제17권4호
• /
• pp.3-10
• /
• 2008

In the Western and Oriental architecture, corridor and stairs have not been important from the whole architectural composition. The purpose of this study is to analyze their elements from theoretical viewpoint of modern architecture. The subject of analysis are Yangjindang and Daesanru of the Mid-Chosun Dynasty in Sangju. The conclusions are the followings : First, the moving line in the Western and Oriental architecture has the linear axis, and in general moving axis is straighten in Hanok architecture. But unlike common traditional architecture, the two buildings are right-angled in the moving axies. Second, Toenmaru in Yangjindang is the element of visual experience in the whole architectural space as promenade architecture called by Le Corbusier. On the other hand, Toenmaru in Daesanru plays a role the space of thinking in extending a visual field to the nature than its pure function. Third, the stairs of Yangjindang is diagonal shape with a role of entrance, but that of Daesanru was concealed in the wall as interior step. Yangjindang has two different stairs. One is broad and shallow stairs with ceremonial or public expression, and the other is narrow and steep stairs with unstable or private expression. This paper intends to show the latent architectural possibility of our traditional architecture.

• 패션비즈니스
• /
• 제22권6호
• /
• pp.115-130
• /
• 2018

This study looked at how New Zealand's national brand is expressed in fashion design. In other words, the objective of this study was to offer a research methodology about the process that the conceptual national brand materializes through design. The method used in this research was the review of previous literature and research reports for New Zealand national branding. A direct market survey on the characteristics of fashion brands in each travel destination was conducted from February 2017 to February 2018. New Zealand announced its slogan for the national brand '100% pure New Zealand' in 1999, and in 2003 it announced the slogan 'new thinking New Zealand' with the value of 'newness' and 'innovation'. It also has 'Maori branding'. The study found that the three slogans had a consistent link from keywords to associated visual images. The above results were compared to the reminiscent visual images extracted from the website contents of the fashion brand. Then, using a t-shirt as an item, the t-shirt corresponding to each group was classified, and the design element analyzed. As a result, the four groups showed images of 'New Zealand ecology image', 'ethnic & Kiwiana image', 'nostalgic travel image' and 'pop image'.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1606-1618
• /
• 2017

The explosion effect of computer graphics Visual Effects(VFX) used in films and animations is an important element that determines the completeness of the film, and its usage is getting extended. The realistic explosion effect of VFX should be made according to observations and analysis of various factors of actual explosion in real world. This experimental research would suggest the efficient production guideline for the technical characteristics of underwater explosion of VFX. For this research process, first, the comparison of actual explosion and VFX explosion effect, classification of actual explosion, and characteristics of underwater explosion effect will be addressed. Second, based on the literature reviews, the four steps of experimental production analysis tool will be derived. Third, the experimental research will be processed in along with technical factors four steps of the underwater explosion effect, (1)realistic creation and emission of fluid, (2)fluid expansion control by water pressure, (3)bubble effect, and (4)motion of bubble & dissipation of fluid. The effective method of fluid simulation production will be verified through experimental studies based on the characteristics of the actual explosion process. This experimental study suggested the VFX production technique is expected to be used as the basic data for related research field.

• 대한한의정보학회지
• /
• 제15권2호
• /
• pp.1-6
• /
• 2009

The discipline of terminology is based on its own theoretical principles and consists primarily of the following aspects: analysing the concepts and concept structures used in a field or domain of activity, identifying the terms assigned to the concepts, in the case of bilingual or multilingual terminology, establishing correspondences between terms in the various languages, creating new terms, as required. The word properties has syntax, morphology and orthography. The syntax is that how words are put together. The morphology is consist of inflection, derivation, and compounding. The orthography is spelling. Otherwise, the terms of TKM(Traditional Korean Medicine) is two important element of visual character and phonetic notation. A visual character consist of spell, sort words, stop words, etc. For example, that is a case of sort words in which this '다한', '한다', '多汗', '汗多' as same. A phonetic notation consist of palatalization, initial law, etc. For example, that is a case of palatalization in which this '수족랭', '수족냉', '手足冷', '手足冷' as same. Therefore, to enlarged reference terminology is a method by term's normalization. For such a reason, TKM's terms of normalization is necessary.

• Composites Research
• /
• 제25권6호
• /
• pp.224-229
• /
• 2012

정찰 및 감시를 위한 어레이 안테나가 내장된 날개는 컷아웃이 수반되기 때문에 구조성능이 저하된다. 본 논문에서는 단순화된 복합재 날개에 어레이 안테나 탑재시 안테나성능 저하와 날개구조 성능 저하를 최소화할 수 있는 복합재 모자형 보강재의 두께에 대해 최적설계를 수행하였다. 최적의 모자형 보강재 형상 선정을 위하여 모자형 보강재의 웹 경사도와 플랜지의 길이에 변화를 주어 상용 유한요소해석 프로그램을 이용하여 구조 해석을 수행하였다. 복합재 모자형 보강재형상에 대하여 응력과 좌굴에 대한 구속조건으로 상용 최적화 프로그램인 VisualDOC와 상용 유한요소해석 프로그램을 이용하여 최적화를 수행하여 보강재의 두께를 결정하였다.

• 한국통신학회논문지
• /
• 제38C권9호
• /
• pp.781-786
• /
• 2013

Multiplexing information over parallel data channels based on RF MIMO concept is possible to achieve considerable data rates over large transmission ranges with just a single transmitting element. Visual multiplexing MIMO techniques will send independent streams of bits using the multiple elements of the light transmitter array and recording over a group of camera pixels can further enhance the data rates. The proposed system is a combination of the reliance on computer vision algorithms for tracking and OOK cell frame modulation. LED array are controlled to transmit message in the form of digital information using ON-OFF signaling with ON-OFF pulses (ON = bit 1, OFF = bit 0). A camera captures image frames of the array which are then individually processed and sequentially decoded to retrieve data. To demodulated data transmission, a motion tracking algorithm is implemented in OpenCV (Open source Computer Vision library) to classify the transmission pattern. One of the most advantages of proposed architecture is Computer Vision (CV) based image analysis techniques which can be used to spatially separate signals and remove interferences from ambient light. It will be the future challenges and opportunities for mobile communication networking research.

• 한국콘텐츠학회논문지
• /
• 제6권11호
• /
• pp.161-171
• /
• 2006

색채는 시각이미지 표현의 중요한 조형요소로서 그 표현력이 증대되고 있다. 그러나 색채의 가변적인 특성과 함께 화면 내에서 조응하는 다른 조형요소와의 관계성은 색채의 효과적인 표현을 어렵게 한다. 디즈니사에서 제작된 <뮬란>과 <라이온 킹>에 나타난 그림스타일은 색채사용에 있어서 상당한 표현상의 차이가 있다. 두 작품의 색채사용에 대한 차이점과 그 원리를 규명하여 색채를 적절히 활용할 수 있는 방안을 세우고자 한다. 연구 방법으로는 색채가 가지고 있는 표현적인 특성을 다른 조형요소들과의 관계 속에서 어떻게 활성화시킬 수 있는가의 문제에 초점을 맞추었다. 결론적으로 색채는 빛의 속성 중 하나이지만 빛의 또 다른 속성인 밝고 어두움, 즉 콘트라스트(contrast)에 가장 큰 영향을 받는다는 것이다. 이것은 조형의 질서를 구축하는데 우선적으로 고려해야 할 사항 중 하나이다. 따라서 색채의 표현적인 특성을 강조하기 위해서는 다른 조형요소들과의 관계를 조절해야 하고 특히 명도와 형태의 표현적인 힘을 약화시켰을 때 가능해 진다.

• 대한인간공학회지
• /
• 제31권4호
• /
• pp.499-505
• /
• 2012

Objective: Research on the transformation of interaction between mobile machines and users through analysis on current gesture interface technology development trend. Background: For smooth interaction between machines and users, interface technology has evolved from "command line" to "mouse", and now "touch" and "gesture recognition" have been researched and being used. In the future, the technology is destined to evolve into "multi-modal", the fusion of the visual and auditory senses and "3D multi-modal", where three dimensional virtual world and brain waves are being used. Method: Within the development of computer interface, which follows the evolution of mobile machines, actively researching gesture interface and related technologies' trend and development will be studied comprehensively. Through investigation based on gesture based information gathering techniques, they will be separated in four categories: sensor, touch, visual, and multi-modal gesture interfaces. Each category will be researched through technology trend and existing actual examples. Through this methods, the transformation of mobile machine and human interaction will be studied. Conclusion: Gesture based interface technology realizes intelligent communication skill on interaction relation ship between existing static machines and users. Thus, this technology is important element technology that will transform the interaction between a man and a machine more dynamic. Application: The result of this study may help to develop gesture interface design currently in use.

• 한국안광학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2009

국산 누진가입도렌즈의 품질향상을 위하여, 누진가입도렌즈의 광학적, 기하학적 요소를 측정하고, 국제규격에 따른 품질을 평가하였다. 방법: 국내시장에서 판매되고 있는 국내외 브랜드의 누진가입도렌즈를 대상으로 굴절력, 중심두께, 프리즘 굴절력을 측정하여, 국제규격에 따라 비교, 분석하였다. 결과: 국내 브랜드 제품들이 해외브랜드 제품과 대등한 품질을 보였으나, 국제규격의 허용기준에 미치지 못하는 경우가 있었다. 결론: 누진가입도렌즈는 세심한 주의가 요구되므로, 국산제품이 세계시장에서 더 높은 경쟁력을 가지기 위해서는 보다 엄격한 품질관리가 필수요소인 것으로 생각된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.146-151
• /
• 2001

This study is an investigation for the ADS optimum design by using FEM. We write out program which express ADS perfectly and reduce the required time for correcting of model to the minimum in solution and manufacture result. We complete algorithm which can plan optimum forming of model by feedback error information in CAE. For that, we draw up ADS program which modeling rachet wheel by using visual LISP and telegraph to ANSYS, structural solution program, we can solve stress solution. Then we correct model by feedback date obtaining in solution process, repeat course following stress solution again and do modeling rachet wheel for optimum forming. That is our aim. As a result of experience, we can develope automatic design program using Visual LISP and exhibit ADS as modeling third dimension CAD for optimum design. Also, we develop optimum design algorithm using ADS and FEM. In rachet wheel, greatest equivalence stress originates in key groove comer and KS standard is proved the design for security.