• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2001

To product the map by terrestrial photogrammetry method, a few rather nuisance stereo image acquiring processing and plot using expensive analytical instruments have to be performed. In this study, plot was made by acquiring and rectification image using simple method rather than above it. For this, geometry rectification system was constructed for the generation of single ortho-image analysis. and these ortho-images of architecture were made and analysed by appling various warping methods. As a result, the performance of single image analysis could be estimated, and it is expected that the application of this is possible to various non-topographic photogrammetry.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.7-15
• /
• 2007

This study aim to investigate image characteristics due to focus-grid and head phantom decentering from the armorphos silicon thin film transistor detector the fixed focus-grid is applied, wish to propose right use method of digital medical equipment. Acquired image according to focus-grid and head phantom position decentering using head phantom on armorphos silicon thin film transistor detector the fixed focus-grid is applied. acquired image evaluate pixel value, histogram, plot profile, surface plot using NIB (Image J) image analysis program and compared decentering image with standard image. Mean value and standard deviation value of focus-grid lateral decentering and duplex decentering of focus-grid and head phantom decreased by ratio, consequently increase of horizontality, diagonal decentering. also, deteriorated contrast of image because frequency of high pixel value decreases fairly. according increases decentering, image distortion phenomenon was increase, by next time, pixel mean value of head phantom decentering was no big change but horizontality, diagonal, mean value and standard deviation value of pixel decreased by ratio. Even if increase pixel noise of image because wide latitude and post processing ability of digital detector, radiotechnologist can not recognize. Therefore, radiotechnologist must recognize correctly the photographing factors which increases pixel noise on the grid system installation digital detector and should exam.

• Communications for Statistical Applications and Methods
• /
• v.11 no.2
• /
• pp.345-353
• /
• 2004

Graphical methods for the specification of the curvature as a function of two predictors are animated to see the effect of an added variable to the model. Through a 3D animated plot it might be difficult to find a sequence of interpretable plots. But examples demonstrate that useful information can be obtained by using rotation technique in 3D plot. Besides 3D plots, an example of 2D animated plot applied to the case of high correlation between predictors and an added predictor is also given. It implies that speed of the convergence to a certain image in a dynamic plot may be understood as an influence of collinearity.

• International journal of advanced smart convergence
• /
• v.13 no.3
• /
• pp.199-204
• /
• 2024

In the context of exploring how Artificial Intelligence(AI) can revolutionize the entertainment industry, more and more film and television productions have begun to try to intervene AI technology in various aspects of content creation. However, despite the fact that AI can generate a large amount of textual content and dynamic visual effects, it still faces challenges in terms of plot expression and delivery. This thesis explores the strengths and weaknesses, innovations, and future developments of AI technology in plot production by analyzing existing film and television productions and production practices generated using AI technology. The study proves that as AI technology continues to improve, its use in short-form production will become more and more prevalent in the future, helping human creators become more efficient and even able to produce Short Dramas in full flow.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.141-146
• /
• 2003

In case of producing image map by using the color aerial photograph, DEM makes on huge effects to the accuracy of ortho image. Thus, this paper has the purpose that evaluate the accuracy of DEM acquired by matching the color aerial photograph. At the study, result of color aerial photograph's control point surveying was X=${\pm}$0.14m, f=${\pm}$0.16m. Estimated result by DEM of plot-map and matching has RMSE=${\pm}$1.058m for the elevation(Z). For matching DEM has a minor(-)'s value, it can access that produce by high point than plot-map DEM.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.423-433
• /
• 1999

Purpose : To assess the methods for the clinical evaluation of the longitudinal bone changes after implantation of tooth ash-plaster mixture into the defect area of human jaws. Materials and methods : Tooth ash-plaster mixtures were implanted into the defects of 8 human jaws. 48 intraoral radiograms taken with copper step wedge as reference at soon, 1st, 2nd, 4th, and 6th week after implantation of mixture were used. X-ray taking was standardized by using Rinn XCP device customized directly to the individual dentition with resin bite block. The images inputted by Quick scanner were digitized and analyzed by NIH image program. Cu­equivalent values were measured at the implanted sites from the periodic digital images. Analysis was performed by the bidirectional subtraction with color enhancement and the surface plot of resliced contiguous image. The obtained results by the two methods were compared with Cu­equivalent value changes. Results : The average determination coefficient of Cu-equivalent equations was 0.9988 and the coefficient of variation of measured Cu values ranged from 0.08~0.10. The coefficient of variation of Cu-equivalent values measured at the areas of the mixture and the bone by the conversion equation ranged from 0.06 ~0.09. The analyzed results by the bidirectional subtraction with color enhancement were coincident with the changes of Cu-equivalent values. The surface plot of the resliced contiguous image showed the three dimensional view of the longitudinal bone changes on one image and also coincident with Cu-equivalent value changes after implantation. Conclusion : The bidirectional subtraction with color enhancement and the surface plot of the resliced contiguous image was very effective and reasonable to analyze clinically and qualitatively the longitudinal bone change. These methods are expected to be applicable to the non-destructive test in other fields.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.2
• /
• pp.61-68
• /
• 1996

In this paper we propose a new visualization technique to characterize qualitative information of a large DNA sequence. While a long DNA sequence has huge information, it is not easy to obtain genetic information from the DNA sequence. We transform DNA sequences into a polygon to compute their homology in image domain rather than text domain. Our program visualizes DNA sequences with colored random walk plots and simplify them k-convex hulls. A random walk plot represents DNA sequence as a curve in a plane. A k-convex hull simplifies a random work plot by removing some parts of its insignificant information. This technique gives a biologist an insight to detect and classify DNA sequences with easy. Experiments with real genome data proves our approach gives a good visual forms for long DNA sequences for homology analysis.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.73-86
• /
• 1997

This study was performed to assess the analyzing methods developed to detect clinically and quantitatively longitudinal bone changes. Through preliminary experiment, accuracy of Cu-Eq value conversion to the mass of HA was examined. For main experiment, 15 intraoral radiograms taken at soon, 1st, 2nd, 4th, and 6th week after implantation of mixture in extracted sites of 3 cases were used. We took the radiograms with copper step wedge as test object and HA phantom X -ray taking was standardized by using Rinn XCP device customized directly to the individual dentition with resin bite block. The images inputted by Quick scanner into computer were digitized and analyzed by NIH image program. The stability of the copper equivalent transformation and the usefulness of two analyzing methods by ROI and Reslice were examined. Obtained results as follows: 1) On the Cu equivalent images, the coefficient of variation in the measurement of Cu-Eq. value of ROI ranged from 0.05 to 0.24 and showed high reproducibility. 2) All results obtained by resliced contiguous image were coincident with those obtained from the assessment by ROI and formation of plot profile. 3) On the stacked and resliced image at the line of interest, we could analyze directly and quantitatively the longitudinal changes at several portions by plot profile and qualitatively by surface plot. 4) Implant area showed marked resorption till 2 weeks after implantation and showed significant increase in Cu-Eq. value at 6th week(p<0.01) and periapical area showed increase in Cu-Eq. value at 6th week compared to after-operation's.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.425-426
• /
• 2015

With the progress of science and technology, animation is no longer about simply describing the nature. People's imagination is elevated to new stage, which not only improve the image in the reality, but also create the absent image in the reality. To analyze according to the existence, these characters have two basic elements. The one is the character existing in the reality, we process and design it according to the artistic technique, so as to make it service for the plot and film (hereafter called documentary character). The other is the character not existing in the reality (hereafter called conceptual character), which is called simulation image by Baudrillard.

• Korean Journal of Oriental Medicine
• /
• v.17 no.2
• /
• pp.115-120
• /
• 2011

Objectives : The purpose of this study is to develop an apparatus which can take a facial image by self-operated capturing technique. The user can obtain one's facial image immediately after adjusting facial tilt and focusing distance. The system has been designed for classifying Sasang typology based on facial image. Methods : The system is composed of a Webcam, one-way glass mirror and mini LCD. The Webcam takes a facial image which is displayed on the mini LCD. Then the user can see and adjust to the right position in the real time through the image mirror-reflected from the mini LCD. The optical sensor is used to estimate the proper focusing distance. To verify the performance of the system, 11 characteristic points on the facial image are used and compared with high performance DSLR camera(D700) by applying the coefficient of variance and Bland-Altman Plot. Results : The developed system and D700 show enough agreement with the small coefficient of variance to analyse constitutional types with a facial im mage. However, the result of Bland-Altman plot shows that the width parameters have distortions owing to short focusing distance. Conclusions : The system is expected to be utilized on u-healthcare services for home environment after improving the distortion in the width parameters.