• 제목/요약/키워드: The Impact Tolerance

검색결과 183건 처리시간 0.027초

Impact of Receiver on In-Band Crosstalk-Induced Penalties in Differentially Phase-Modulated Signals

  • Hu, Qikai;Kim, Hoon;Kim, Chul Han
    • Journal of the Optical Society of Korea
    • /
    • 제20권2호
    • /
    • pp.223-227
    • /
    • 2016
  • The impact of optical receiver configuration on in-band crosstalk-induced penalty has been investigated in both theoretical and experimental analyses, for differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK) signals. Previously it has been shown that DPSK signals are ~6 dB more tolerant to in-band crosstalk than on-off keying (OOK) signals. However, we find that the tolerance difference between the two signals is reduced to ~3 dB when the decision threshold of the receiver is optimized to minimize the bit-error rate for each signal. Then we derive simple equations for the in-band crosstalk-induced penalty in DPSK and DQPSK signals with two different optical receiver configurations: balanced and single-ended direct-detection receivers. We confirm that the penalties obtained from our simple equations agree well with the measured results.

저속 충격 하중을 받은 탄소섬유강화 복합재 압력용기의 잔류강도 저하 평가 (Evaluation of Residual Strength of CFRP Pressure Vessel After Low Velocity Impact)

  • 박재범;김동륜;김형근;황태경
    • Composites Research
    • /
    • 제21권3호
    • /
    • pp.9-17
    • /
    • 2008
  • 본 논문에서는 저속충격하중을 받은 필라멘트 와인딩 탄소섬유강화 복합재 압력용기의 잔류강도 저하특성에 대한 수치해석 및 실험결과에 대해서 논한다. 복합재 압력용기의 원통부의 여러 곳에 대해 낙하 공구의 끝단을 모사한 삼각형 충격자를 사용한 저속 충격시험이 실시되었고, 유한요소해석을 수행하여 충격시의 기계적 변형 및 응력분포 거동에 대한 예측을 실시하였다. 충격하중을 받은 복합재 압력용기의 잔류강도 저하 특성을 정량적으로 평가하기 위해, 충격부위를 포함하는 원환시편을 압력용기의 실린더부로부터 채취하여, 원주방향 내압인장강도 측정 수압시험법으로부터, 원환시편의 수압파열 압력을 측정하였다. 결과적으로 본 연구를 통해 충격 에너지의 수준에 따른 잔류강도 변화가 성공적으로 계측되었으며, 복합재 압력용기의 충격손상허용을 정량적으로 평가하기 위한 유용한 방법론이 정립되었다.

고속충격을 받는 Ti/Al 적층재의 파괴거동에 관한 연구 (A study on the fracture behavior of Ti/Al laminates under high velocity impact)

  • 손세원;이두성;홍성희
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.267-272
    • /
    • 2003
  • In order to investigate the effect of face material on Ti/Al alloy laminates under high velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by protection ballistic limit($V_{50}$), a statistical velocity with 50% probability penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with $0^{\circ}$obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ tests with $0^{\circ}$obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes which face material was Titanium alloy, were compared to those which face material was anodized Al alloy after cold-rolling.

  • PDF

The Perforation Behavior of the Anodized AI Light Armor under High Velocity Impact

  • Sohn, Se-Won;Lee, Doo-Sung;Kim, Hee-Jae;Hong, Sung-Hee
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제4권4호
    • /
    • pp.45-50
    • /
    • 2003
  • In order to investigate the effect of surface treatment (Anodizing) and rolling on AI 5083-H131 alloy, under hyper velocity impact, a ballistic testing was conducted. Ballistic resistance of these materials was measured by a protection ballistic limit ($V_{50}$)' a statistical velocity with 50% probability of penetration. Perforation behavior and ballistic tolerance, described by penetration modes, were respectfully observed, by $V_{50}$ test and Projectile Through Plates (PTP) test at velocities greater than $V_{50}$. PTP tests were conducted with 0$^{\circ}$ obliquity at room temperature using 5.56mm ball projectiles. $V_{50}$ tests with 0$^{\circ}$ obliquity were also done with projectiles that were able to achieve near or complete penetration during PTP tests. Resistance to penetration, and penetration modes of Al 5052-H34 alloy were compared to those of Al 5083-H 131 alloy.

강원도 남대천, 연곡천과 사천천의 식물플랑크톤 군집 (The Phytoplankton community of Namdae-stream, Yeongok-stream and of Sacheon-stream in Gangwon-do)

  • 김용진;이옥민
    • 환경영향평가
    • /
    • 제20권3호
    • /
    • pp.281-297
    • /
    • 2011
  • The specie composition, stranding crops and the dominant species of phytoplankton were studied in three streams, Namdae-stream, Yeongok-stream and Sacheon-stream from May 2008 to February 2009. The water qualities of the three streams which run into estuary were also examined using phytoplankton indicators. As the result, the phytoplankton appeared 94 taxa in Namdae-stream, 79 taxa in Yeongok-stream and 73 taxa in Sacheon-stream, diatoms appeared the most in phytoplankton. Genus Navicula and Cymbella in diatoms appeared to be over 10 taxa in each stream, N. cryptocephala, N. cryptotenella and N. gregaria, the pollution tolerance taxa, appeared more frequent in the downstream. Due to the separation of each substrate by the rapid water velocity in the upstream, Achnanthes minutissima, a known periphyton, was dominant in upstream site at Namdae and Yeongok-stream. Some construction areas and sites of downstream of Namdae-stream, Yeongok-stream and Sacheon-stream were shown to be polluted because pollution tolerance taxa, such as Cyclotella meneghiniana, Nitzschia palea and Oscillatoria limnetica, were dominant. The total of 20 taxa phytoplankton indicators were found, composed of 16 taxa of Water pollution algae including Oscillatoria limosa, 2 taxa of Clean water algae Meridion circulare and Staurastrum puntulatum, 1 taxa of Toxic algae Microcystis aeruginosa and 1 taxa of Taste and odor algae Fragilaria construens. Water pollution indicators were appeared frequently in polluted sites of biological water quality(DAIpo, TDI) and of sites containing high trophic state index(TSI). Therefore, using the phytoplankton indicators can assess water quality through relation of biological water quality and trophic state index.

표면 경화 처리된 Al, Ti의 고속 충격 저항성에 관한 연구 (A Study on the resistance of surface hardening treated Aluminum, Titanium alloy under the high velocity impact)

  • 손세원;김희재;홍성희;김영태
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.852-855
    • /
    • 2002
  • In order to investigate the fracture behaviors(penetration modes) and resistance to penetration during ballistic impact of surface hardening treated Aluminum, Titanium alloy laminates, ballistic tests were conducted. In this paper, Anodized Al 5083-H131 alloy laminates and nitrified Ti (Gr.2) alloy laminates were used to achieve higher surface hardness. Surface hardness test were conducted using a Micro victor's hardness tester and thickness of surface hardening treated specimens was measured by video microscope. Resistance to penetration is determined by the protection ballistic limit($V_50$), a statistical velocity with 50% probability far complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_50$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_50$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during PTP tests.

  • PDF

PVD처리한 티타늄 합금의 고속충격 거동에 관한 연구 (A Study on the high velocity impact behavior of titanium alloy by PVD method)

  • 손세원;이두성;홍성희
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집A
    • /
    • pp.567-572
    • /
    • 2001
  • In order to investigate the fracture behaviors(penetration modes) and resistance to penetration during ballistic impact of Titanium alloy laminates and nitrified Titanium alloy laminates which were treated by PVD(Physical Vapor Deposition) method, ballistic tests were conducted. Evaporation, sputtering, and ion plating are three kinds of PVD method. In this research, Ion plating was used to achieve higher surface hardness and surface hardness test were conducted using a Micro vicker's hardness tester. Resistance to penetration is determined by the protection ballistic limit($V_{50}$), a statistical velocity with 50% probability for complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_{50}$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_{50}$ test with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during PTP tests. Surface hardness, resistance to penetration, and penetration modes of Titanium alloy laminates are compared to those of nitrified Titanium alloy laminates.

  • PDF

마황약침(麻黃藥鍼)이 비만 유발 생쥐의 지방대사에 미치는 영향 (The Effect of Ephedra sinica Pharmacopuncture on Lipid Metabolism in an Experimental Mouse Model of Obesity)

  • 김효재;김은지;한양희
    • 대한한방내과학회지
    • /
    • 제37권4호
    • /
    • pp.579-590
    • /
    • 2016
  • Objectives: This study aimed to investigate the impact of Ephedra sinica pharmacopuncture on the weight and lipid metabolism of obese mice.Methods: Obesity was induced in male C57BL/6 mice by a 60% fat diet. The animals were divided into three groups (n=5) fed a normal diet, high-fat diet, and high-fat diet with Ephedra sinica pharmacopuncture. After 13 wk, fasting blood sugar levels were measured in each group, and oral glucose tolerance tests were conducted. After 15 wk, body weight, epididymal fat pad weight, subcutaneous fat pad weight, and serum lipid and gene expression of hormone sensitive lipase (HSL), adipose triglyceride lipase (ATGL), monoacylglycerol lipase (MGL), perilipin, and peroxisome proliferator-activated receptor (PPAR)-γ were measured in each group.Results: In the Ephedra group, body weight, fasting blood sugar, and oral glucose tolerance were significantly decreased. In addition, in the Ephedra group, the gene expression of HSL was significantly increased, whereas that of perilipin was significantly decreased.Conclusions: These results provide evidence that E. sinicapharmacopuncture affects obesity and obesity-induced metabolic syndrome, including insulin resistance and dyslipidemia, by activating lipolysis via the HSL pathway in adipose tissue.

보강재 본딩접합 복합재 적층판구조 피로손상 균열진전 수명예측에 대한 연구 (A Study on Prediction of Fatigue Damage Crack Growth for Stiffener Bonded Composite Laminate Panel)

  • 권정호;정성문
    • Composites Research
    • /
    • 제26권2호
    • /
    • pp.79-84
    • /
    • 2013
  • 본 연구에서는 적층판 시편의 피로손상 균열진전 시험결과와 적층보강판 구조의 응력강도 해석결과를 기초로 충격손상을 모사한 원공과 노치손상을 내재한 보강재 본딩접합 적층보강판 구조의 피로손상 균열진전 수명예측에 대하여 고찰하였다. 그리고 적층보강판 구조시편에 대한 손상허용 시험결과와 손상진전 수명예측 해석결과를 비교분석한 결과 손상균열 길이 변화에 따라 최종파단에 대한 잔여강도를 예측하고 손상허용성 평가를 할 수 있었다.

Mutations Affecting Cellular Levels of Cobalamin (Vitamin B12) Confer Tolerance to Bactericidal Antibiotics in Burkholderia cenocepacia

  • Dongju Lee;Jongwook Park;Heenam Stanley Kim
    • Journal of Microbiology and Biotechnology
    • /
    • 제34권8호
    • /
    • pp.1609-1616
    • /
    • 2024
  • The Burkholderia cepacia complex (Bcc) consists of opportunistic pathogens known to cause pneumonia in immunocompromised individuals, especially those with cystic fibrosis. Treating Bcc pneumonia is challenging due to the pathogens' high multidrug resistance. Therefore, inhalation therapy with tobramycin powder, which can achieve high antibiotic concentrations in the lungs, is a promising treatment option. In this study, we investigated potential mechanisms that could compromise the effectiveness of tobramycin therapy. By selecting for B. cenocepacia survivors against tobramycin, we identified three spontaneous mutations that disrupt a gene encoding a key enzyme in the biosynthesis of cobalamin (Vitamin B12). This disruption may affect the production of succinyl-CoA by methylmalonyl-CoA mutase, which requires adenosylcobalamin as a cofactor. The depletion of cellular succinyl-CoA may impact the tricarboxylic acid (TCA) cycle, which becomes metabolically overloaded upon exposure to tobramycin. Consequently, the mutants exhibited significantly reduced reactive oxygen species (ROS) production. Both the wild-type and mutants showed tolerance to tobramycin and various other bactericidal antibiotics under microaerobic conditions. This suggests that compromised ROS-mediated killing, due to the impacted TCA cycle, underlies the mutants' tolerance to bactericidal antibiotics. The importance of ROS-mediated killing and the potential emergence of mutants that evade it through the depletion of cobalamin (Vitamin B12) provide valuable insights for developing strategies to enhance antibiotic treatments of Bcc pneumonia.