• Smart Structures and Systems
• /
• 제12권1호
• /
• pp.55-71
• /
• 2013

Structural health monitoring (SHM) is vital for detecting the onset of damage and for preventing catastrophic failure of civil infrastructure systems. In particular, piezoelectric transducers have the ability to excite and actively interrogate structures (e.g., using surface waves) while measuring their response for sensing and damage detection. In fact, piezoelectric transducers such as lead zirconate titanate (PZT) and poly(vinylidene fluoride) (PVDF) have been used for various laboratory/field tests and possess significant advantages as compared to visual inspection and vibration-based methods, to name a few. However, PZTs are inherently brittle, and PVDF films do not possess high piezoelectricity, thereby limiting each of these devices to certain specific applications. The objective of this study is to design, characterize, and validate piezoelectric nanocomposites consisting of zinc oxide (ZnO) nanoparticles assembled in a PVDF copolymer matrix for sensing and SHM applications. These films provide greater mechanical flexibility as compared to PZTs, yet possess enhanced piezoelectricity as compared to pristine PVDF copolymers. This study started with spin coating dispersed ZnO- and PVDF-TrFE-based solutions to fabricate the piezoelectric nanocomposites. The concentration of ZnO nanoparticles was varied from 0 to 20 wt.% (in 5 % increments) to determine their influence on bulk film piezoelectricity. Second, their electric polarization responses were obtained for quantifying thin film remnant polarization, which is directly correlated to piezoelectricity. Based on these results, the films were poled (at 50 $MV-m^{-1}$) to permanently align their electrical domains and to enhance their bulk film piezoelectricity. Then, a series of hammer impact tests were conducted, and the voltage generated by poled ZnO-based thin films was compared to commercially poled PVDF copolymer thin films. The hammer impact tests showed comparable results between the prototype and commercial samples, and increasing ZnO content provided enhanced piezoelectric performance. Lastly, the films were further validated for sensing using different energy levels of hammer impact, different distances between the impact locations and the film electrodes, and cantilever free vibration testing for dynamic strain sensing.

• Steel and Composite Structures
• /
• 제5권2_3호
• /
• pp.181-192
• /
• 2005

The effective length method for flexural (column) buckling has been used for many decades but its use is somewhat limited in various contemporary design codes to moderately slender structures with elastic critical load factor (${\lambda}_{cr}$) less than 3 to 5. In pace with the use of higher grade steel in recent years, the influence of buckling in axial buckling resistance of a column becomes more important and the over-simplified assumption of effective length factor can lead to an unsafe, an uneconomical or a both unsafe and uneconomical solution when some members are over-designed while key elements are under-designed. Effective length should not normally be taken as the distance between nodes multiplied by an arbitrary factor like 0.85, 1.0, 2.0 etc. Further, the classification of non-sway and sway-sensitive frames makes the conventional design procedure tedious to use and, more importantly, limited to simple regular frames. This paper describes the practical use of second-order analysis with section capacity check allowing for $P-{\delta}$ and $P-{\Delta}$ effects together with member and system imperfections. Most commercial software considers only the $P-{\Delta}$ effect, but not member and frame imperfections nor $P-{\delta}$ effect, and engineers must be very careful in their uses. A verification problem is also given for validation of software for this type of powerful second-order analysis and design. It is a trend for popular and advanced national design codes in using the second-order analysis as a norm for analysis and design of steel structures while linear analysis may only be used in very simple structures.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.70-78
• /
• 2018

탄소섬유 복합재료를 적용하는 일체형 접이식 날개 개발에 대한 연구를 수행하였다. 설계 요구조건을 검토하고 상용 소프트웨어를 적용한 최적설계기법을 통해 복합재료 날개 설계를 실시하였다. 복합재료 제조공정인 핫프레스, 펄트루전, 오토클레이브를 평가하고 성능과 비용을 고려하여 일체형 날개제작에 가장 적합한 다중공정을 결정하였다. 설계개념 확정을 위해 두 차례의 설계개발시험으로 제작공정을 검증하고 구조해석을 통해 복합재료 날개의 강성과 강도를 예측하였다. 시험하중을 먼저 산출하고 양쪽 날개를 대상으로 설계제한하중과 설계극한하중에 대한 정하중 구조시험을 수행하였다. 그 결과, 시험의 각 평가기준을 만족하였으며 일련의 구조해석과 시험을 통해 구조안전성을 검증하였다.

• 경영과정보연구
• /
• 제4권
• /
• pp.349-374
• /
• 2000

With rapid advances on Interactive technology, and the growing popularity of the Internet, Internet shopping receives considerable attention in both the popular-press and academic journals. The Internet has enormous commercial possibilities. But it is a new and dynamic medium that poses special challenges for marketers. The revolutionary nature of the Internet mandates that established wisdom on consumer marketing along with marketing-mix strategies has to be reexamined and perhaps radically revised. In order to assist marketers in this endeavor it is critical to understand consumers' buying behaviors of Internet shopping. But research in this area still very much its infancy. This study examined previous researches of Internet shopping and developed conceptual framework of Internet shopping modes. Additionally, this study examined empirical investigation of Internet shopping. Preliminary results suggests that there are significant differences in individuals' perceptions of Internet shopping and traditional shopping modes. Various factors influences on consumers' buying behavior on Internet shopping. There are Individuals' factors(personality, lifestyle, prior experience, perceived risk etc), shopping mall factors(trust, vividness, security, promotion, etc), product characteristics(product category, brand, etc), situational factors(time pressure, locational constraints etc), social/cultural factors(Norms, importance of other peoples etc). Additionally, We conducted empirical study of the impact of the Internet on consumer shopping behavior. We gathered consumers' reactions via an open-ended survey using a sample of 90 shoppers. We related the reactions to the factors of consumers' satisfaction or dissatisfaction of the Internet shopping. Consequently, there are many questions regarding factors that might influence Internet shopping. From theoretical and practical perspectives, studies that examine these factors would seem to offer much to the discipline. This paper has attempted th provide insights and direction of future empirical examination of Internet shopping.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.405-423
• /
• 2016

In this study, the feasibility of using telecommunication single-mode optical fiber (SMF) as a distributed fiber optic strain and crack sensor was evaluated in concrete pavement monitoring. Tensile tests on various sensors indicated that the $SMF-28e^+$ fiber revealed linear elastic behavior to rupture at approximately 26 N load and 2.6% strain. Six full-scale concrete panels were prepared and tested under truck and three-point loads to quantify the performance of sensors with pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA). The sensors were protected by precast mortar from brutal action during concrete casting. Once air-cured for 2 hours after initial setting, half a mortar cylinder of 12 mm in diameter ensured that the protected sensors remained functional during and after concrete casting. The strains measured from PPP-BOTDA with a sensitivity coefficient of $5.43{\times}10^{-5}GHz/{\mu}{\varepsilon}$ were validated locally by commercial fiber Bragg grating (FBG) sensors. Unlike the point FBG sensors, the distributed PPP-BOTDA sensors can be utilized to effectively locate multiple cracks. Depending on their layout, the distributed sensors can provide one- or two-dimensional strain fields in pavement panels. The width of both micro and major cracks can be linearly related to the peak strain directly measured with the distributed fiber optic sensor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.802-807
• /
• 2012

SPR(Self-piercing rivet)은 판재 접합법으로서 스틸과 알루미늄 합금 등의 이종재료 접합에 사용되고 있다. 접합 공정은 피어싱을 포함한 소성변형이 함께 이루어진다. 프레스에서 펀치의 아래에 있는 리벳은 상부판재를 피어싱하고 하부 판재와 기계적으로 맞물리며 소성변형되어 결합된다. 본 논문에서는 SPR을 제작하기 위한 단조공정을 설계하였고, 이를 위하여 상용 유한요소해석 코드인 DEFORM-2D를 이용하여 해석하였다. 리벳 제작을 위한 단조공정의 설계에서 공정 순서, 성형성, 단조하중, 응력과 변형률 분포 등을 조사하였다. 또한 시뮬레이션 결과를 통하여 적합한 단조공정을 설계하였다. 설계된 공정은 업세팅, 헤드부 성형, 후방압출, 두 번째 챔퍼링의 네 단계로 구성된다. 그리고 단조공정에 대한 시뮬레이션 결과는 같은 조건을 적용한 실험 결과를 통하여 검증하였다.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.257-262
• /
• 2018

Vibrational problems in the domestic Small Horizontal Axis Wind Turbines (SHAWT) are due to flap wise vibrations caused by varying wind velocities acting perpendicular to its blade surface. It has been reported that monitoring the structural health of the turbine blades requires special attention as they are key elements of a wind power generation, and account for 15-20% of the total turbine cost. If this vibration problem is taken care, the SHAWT can be made as commercial success. In this work, Shape Memory Alloy (SMA) wires made of Nitinol (Ni-Ti) alloys are embedded into the Glass Fibre Reinforced Polymer (GFRP) wind turbine blade in order to reduce the flapwise vibrations. Experimental study of Nitinol (Ni-Ti) wire characteristics has been done and relationship between different parameters like current, displacement, time and temperature has been established. When the wind turbine blades are subjected to varying wind velocity, flapwise vibration occurs which has to be controlled continuously, otherwise the blade will be damaged due to the resonance. Therefore, in order to control these flapwise vibrations actively, a non-linear current controller unit was developed and fabricated, which provides actuation force required for active vibration control in smart blade. Experimental analysis was performed on conventional GFRP and smart blade, depicted a 20% increase in natural frequency and 20% reduction in amplitude of vibration. With addition of active vibration control unit, the smart blade showed 61% reduction in amplitude of vibration.

• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.1-18
• /
• 2006

Strengthening of existing old structures has traditionally been accomplished by using conventional materials and techniques, viz., externally bonded steel plates, steel or concrete jackets, etc. Alternatively, fibre reinforced polymer composite (FRPC) products started being used to overcome problems associated with conventional materials in the mid 1950s because of their favourable engineering properties. Effectiveness of FRPC materials has been demonstrated through extensive experimental research throughout the world in the last two decades. However there is a need to use refined analytical tools to simulate response of strengthened system. In this paper, an attempt has been made to develop a numerical model of strengthened reinforced concrete (RC) beams with FRPC laminates. Material models for RC beams strengthened with FRPC laminates are described and verified through a nonlinear finite element (FE) commercial code, with the help of available experimental data. Three dimensional (3D) FE analysis has been performed by assuming perfect bonding between concrete and FRPC laminate. A parametric study has also been performed to examine effects of various parameters like fibre type, stirrup's spacing, etc. on the strengthening system. Through numerical simulation, it has been shown that it is possible to predict accurately the flexural response of RC beams strengthened with FRPC laminates by selecting an appropriate material constitutive model. Comparisons are made between the available experimental results in literature and FE analysis results obtained by the present investigators using load-deflection and load-strain plots as well as ultimate load of the strengthened beams. Furthermore, evaluation of crack patterns from FE analysis and experimental failure modes are discussed at the end.

• Membrane and Water Treatment
• /
• 제7권4호
• /
• pp.277-296
• /
• 2016

The aim of this research was to investigate the ability of nanofiltration (NF) and ultrafiltration (UF) membranes as a filtration unit for groundwater treatment for drinking water resources. Commercial membranes denoted as TS40, TFC-SR3 and GHSP were used to study the performance based on rejections and fluxes. The investigation has been conducted using natural groundwater obtained from a deep tube well with initial concentration of iron (Fe) and manganese (Mn) at 7.15 mg/L and 0.87 mg/L, respectively. Experimental results showed that NF membranes exhibited higher fluxes than UF membrane with pure water permeability at 4.68, 3.99 and $3.15L.m^{-2}.h^{-1}.bar^{-1}$, respectively. For metal rejection, these membranes have performed higher removal on Fe with TS40, TFC-SR3 and GHSP membranes having more than 82%, 92% and 86% respectively. Whereas, removal on Mn only achieved up to 60%, 80% and 30%, for TS40, TFC-SR3 and GHSP membranes respectively. In order to achieve drinking water standard, the membranes were efficient in removing Fe ion at 1 and 2 bar in contrast with Mn ion at 4 and 5 bar. Higher rejection of Fe and Mn were achieved when pH of feed solution was increased to more than 7 as TFC-SR3 membrane was negatively charged in basic solution. This effect could be attributed to the electrostatic effect interaction between membrane material and rejected ions. In conclusion, this study proved that NF membrane especially the TFC-SR3 membrane successfully treated local groundwater sources for public drinking water supply in line with the WHO standard.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.1-9
• /
• 2019

Shallow failures occur frequently in both engineered and natural slopes in expansive soils. Rainfall infiltration is the most predominant triggering factor that contributes to slope failures in both expansive soils and clayey soils. However, slope failures in expansive soils have some distinct characteristics in comparison to slopes in conventional clayey soils. They typically undergo shallow failures with gentle sliding retrogression characteristics. The shallow sliding mass near the slope surface is typically in a state of unsaturated condition and will exhibit significant volume changes with increasing water content during rainfall periods. Many other properties or characteristics change such as the shear strength, matric suction including stress distribution change with respect to depth and time. All these parameters have a significant contribution to the expansive soil slopes instability and are difficult to take into consideration in slope stability analysis using traditional slope stability analysis methods based on principles of saturated soil mechanics. In this paper, commercial software VADOSE/W that can account for climatic factors is used to predict variation of matric suction with respect to time for an expansive soil cut slope in China, which is reported in the literature. The variation of factor of safety with respect to time for this slope is computed using SLOPE/W by taking account of shear strength reduction associated with loss of matric suction extending state-of-the art understanding of the mechanics of unsaturated soils.