• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.737-748
• /
• 2022

Due to the lack of flood data, the water engineering practice calculates the design flood using rainfall frequency analysis and rainfall-runoff model. However, the rainfall frequency analysis for arbitrary duration does not reflect the regional characteristics of the duration and amount of storm event. This study proposed a practical method to calculate the design flood in a watershed considering the characteristics of storm event, based on the bivariate rainfall frequency analysis. After extracting independent storm events for the Pyeongchang River basin and the upper Namhangang River basin, we performed the bivariate rainfall frequency analysis to determine the design storm events of various return periods, and calculated the design floods using the HEC-1 model. We compared the design floods based on the bivariate rainfall frequency analysis (DF_BRFA) with those estimated by the flood frequency analysis (DF_FFA), and those estimated by the HEC-1 with the univariate rainfall frequency analysis (DF_URFA). In the case of the Pyeongchang River basin, except for the 100-year flood, the average error of the DF_BRFA was 11.6%, which was the closest to the DF_FFA. In the case of the Namhangang River basin, the average error of the DF_BRFA was about 10%, which was the most similar to the DF_FFA. As the return period increased, the DF_URFA was calculated to be much larger than the DF_FFA, whereas the BRFA produced smaller average error in the design flood than the URFA. When the proposed method is used to calculate design flood in an ungauged watershed, it is expected that the estimated design flood might be close to the actual DF_FFA. Thus, the design of the hydrological structures and water resource plans can be carried out economically and reasonably.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6B
• /
• pp.589-598
• /
• 2010

When the hydraulic structures, such as bridge and weir, are consecutively installed to a short section of a river with complicated cross section, analyzing the flow characteristics and the riverbed change modality of the river is very important. In the 250 m section of the Taehwa river near the Samho-bridge, which passes through Ulsan city, three bridges has been installed, and the tributary water is flowing into both up and downstream of the section. Due to these factors, when the flood occurs, the cross section of the river changes vastly by the water level change and scour. Even so, due to the fact that the Samho-bridge divides the section into two parts, the national river and the regional river, each part is being analyzed separately by the onedimensional model. In this study, the flow characteristics due to the bridge concentration and the tributary water inflow were jointly analyzed for both up and downstream by using the one-dimensional HEC-RAS model and the two-dimensional SMS model, such as RMA2. The riverbed change modality of the section was also investigated by using the SED2D model. The results showed that the water level difference between the HEC-RAS and RMA2 was 0.87 m when applied to the three consecutive bridges. The riverbed change simulation using SED2D showed that the maximum scour was 0.231 m and it occurred at the Samho-bridge, which located in the middle and has short pier distance. In conclusion, when planning the river maintenance for the regions with concentrated bridges or the sections with severe changes in cross-section and flow, estimating the flood elevation by two-dimensional model and establishing countermeasures for the scouring of the bridge are required. In addition, an integrated analysis on both the national river and the regional river is necessary.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.49-69
• /
• 2004

One of the important roles of geophysical exploration in archeological survey may be to provide the subsurface information for effective and systematic excavations of historical remains. Ground Penetrating Radar (GPA) can give us images of shallow subsurface structure with high resolution and is regarded as a useful and important technology in archeological exploration. Since the buried cultural relics are the three-dimensional (3-D) objects in nature, the 3-D or areal survey is more desirable in archeological exploration. 3-D GPR survey based on the very dense data in principle, however, might need much higher cost and longer time of exploration than the other geophysical methods, thus it could have not been applied to the wide area exploration as one of routine procedures. Therefore, it is important to develop an effective way of 3-D GPR survey. In this study, we applied 3-D GPR method to investigate the possible historical remains of Baekje Kingdom at Gatap-Ri, Buyeo city, prior to the excavation. The principal purpose of the investigation was to provide the subsurface images of high resolution for the excavation of the surveyed area. Besides this, another purpose was to investigate the applicability and effectiveness of the continuous data acquisition system which was newly devised for the archeological investigation. The system consists of two sets of GPR antennas and the precise measurement device tracking the path of GPR antenna movement automatically and continuously Besides this hardware system, we adopted a concept of data acquisition that the data were acquired arbitrary not along the pre-established profile lines, because establishing the many profile lines itself would make the field work much longer, which results in the higher cost of field work. Owing to the newly devised system, we could acquire 3-D GPR data of an wide area over about $17,000 m^2$ as a result of the just two-days field work. Although the 3-D GPR data were gathered randomly not along the pre-established profile lines, we could have the 3-D images with high resolution showing many distinctive anomalies which could be interpreted as old agricultural lands, waterways, and artificial structures or remains. This case history led us to the conclusion that 3-D GPR method can be used easily not only to examine a small anomalous area but also to investigate the wider region of archeological interests. We expect that the 3-D GPR method will be applied as a one of standard exploration procedures to the exploration of historical remains in Korea in the near future.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.775-784
• /
• 2023

With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m²/h), and 10,000 (m²/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m²) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.296-310
• /
• 1995

Classification of spatial units into meaningful sets is an important procedure in spatial analysis. It is crucial in characterizing and identifying spatial structures. But traditional classification methods such as cluster analysis require an exact database and impose a clear-cut boundary between classes. Scrutiny of realistic classification problems, however, reveals that available infermation may be vague and that the boundary may be ambiguous. The weakness of conventional methods is that they fail to capture the fuzzy data and the transition between classes. Fuzzy subsets theory is useful for solving these problems. This paper aims to come to the understanding of theoretical foundations of fuzzy spatial analysis, and to find the characteristics of fuzzy classification methods. It attempts to do so through the literature review and the case study of urban classification of the Cities and Eups of Kyung-Nam Province. The main findings are summarized as follows: 1. Following Dubois and Prade, fuzzy information has an imprecise and/or uncertain evaluation. In geography, fuzzy informations about spatial organization, geographical space perception and human behavior are frequent. But the researcher limits his work to numerical data processing and he does not consider spatial fringe. Fuzzy spatial analysis makes it possible to include the interface of groups in classification. 2. Fuzzy numerical taxonomic method is settled by Deloche, Tranquis, Ponsard and Leung. Depending on the data and the method employed, groups derived may be mutually exclusive or they may overlap to a certain degree. Classification pattern can be derived for each degree of similarity/distance $\alpha$. By takina the values of $\alpha$ in ascending or descending order, the hierarchical classification is obtained. 3. Kyung-Nam Cities and Eups were classified by fuzzy discrete classification, fuzzy conjoint classification and cluster analysis according to the ratio of number of persons employed in industries. As a result, they were divided into several groups which had homogeneous characteristies. Fuzzy discrete classification and cluste-analysis give clear-cut boundary, but fuzzy conjoint classification delimit the edges and cores of urban classification. 4. The results of different methods are varied. But each method contributes to the revealing the transparence of spatial structure. Through the result of three kinds of classification, Chung-mu city which has special characteristics and the group of Industrial cities composed by Changwon, Ulsan, Masan, Chinhai, Kimhai, Yangsan, Ungsang, Changsungpo and Shinhyun are evident in common. Even though the appraisal of the fuzzy classification methods, this framework appears to be more realistic and flexible in preserving information pertinent to urban classification.

• Korean Journal of Environment and Ecology
• /
• v.34 no.2
• /
• pp.157-169
• /
• 2020

The purpose of this study is to investigate the ecological characteristics and vegetation structures of Eurya japonica in Busan. As a result of the TWINSPAN and DCA analysis, 89 plots of 100㎡ each were divided into 3 communities: Quercus serrata-Pinus densiflora-E. japonica community, Pinus thunbergii-E. japonica community, and P. thunbergii-Camellia japonica community. Community I consisted of the Quercus serrata-Pinus densiflora-E. japonica which was mainly located in the high altitude inland. While Q. serrata and P. densiflora competed in the tree layer, the dominant species of the understory layer was E. japonica. Since Carpinus tschonoskii, one of the climax species, was distributed evenly from shrub to tree layers, it was likely that deciduous oak trees or Carpinus tschonoskii would become dominant species in community I. In community I, E. japonica was found in higher altitude than the other evergreen broad-leaved tree and was expected to maintain their tree vigor even if the vegetation structure is converted into the deciduous forest. Community II, the P. thunbergii-E. japonica community, was predicted to maintain its tree vigor unless there were unexpected disturbance factors. Community III, consisting of P. thunbergii-C. japonica and located in Dongbaek Island, was under artificial management. In community III, P. thunbergii was the only species in the tree layer, while C. japonica was predominant in the understory layer. E. japonica and various evergreen broad-leaved tree species were present in the understory layer and shrub layer, which were unmanaged areas. Therefore, it is expected that unless C. japonica is continuously managed, E. japonica is likely to become the dominant species. There were also various evergreen broad-leaved species, such as Machilus thunbergii and Pittosporum tobira, present in the shrub layer. If the temperature continues to rise, the habitat is expected to become evergreen broad-leaved forests in the future as P. thunbergii community declines. The result of Pearson's correlation coefficient analysis of E. japonica and species appearing in 89 plots showed that 9 species were had a statistically significant relationship (p<0.05). Four species, including P. tobira and Q. dentata, had a positive correlation. Five species had a negative correlation, and C. japonica, which had the same ecological position as E. japonica, showed the most negative correlation at -0.384.

• Korean small business review
• /
• v.43 no.2
• /
• pp.59-86
• /
• 2021

The platform concept has been used for business operations in various forms: product platforms, transaction platforms and industry platforms. All these platforms have common characteristics of having 'core' that is reused frequently and 'peripherals' that are less reusable and changed often. Companies use platforms to enable efficient development and creation of product family, transactions and innovation. These platforms provide new opportunities for many small and medium-sized companies (SMEs) by bringing changes to traditional industrial structures focused on the products rather than platforms. The service robotics industry in South Korea is mainly composed of technology-intensive SMEs due to its small market size. Although these SMEs succeed in developing technologies, they have difficulties creating and expanding markets to sell products. Thus, this study addresses the characteristics and problems of the South Korean service robotics industry and analyses how ROBOPRINT, one of the SMEs in the service robotics industry, successfully creates and continuously expands the service robot market by adopting platform concept. The results indicate that ROBOPRINT has been applying two types of platforms: product and transaction platforms. First, ROBOPRINT created art robots that were apartment mural service robots. Rather than selling art robots, the company developed various robots such as painting robots, building exterior wall-cleaning robots by reusing the core technology of the robots. The company also developed various robots according to the buyers request. In addition, the company used the robots to directly provide apartment mural services for customers. This mural service has been extended into various areas, not only in apartments but also in soundproof walls, underground passages, and retaining walls. Besides, ROBOPRINT added new services continuously by developing technologies such as virtual reality. Second, ROBOPRINT mediated mural service buyers and mural designers. This platform reduced buyers' workload, which necessitates requesting mural services to ROBOPRINT and searching for mural designers. For designers, this opened up new opportunities to participate in the mural business. The platform attracted both mural buyers and designers who were scattered before. Finally, ROBOPRINT seeks to expand the platform's scope to outside company. To share internally reused ROBOPRINT's technology with other companies, the company participated in Daegu city's 'New Technology Platform Industry'. Furthermore, ROBOPRINT is trying to share the service platform by leasing robots to other companies. This allows external agents to develop technologies and provide services by reusing resources from ROBOPRINT. This study contributes to existing theories by showing that SMEs continuously create and expand markets by building various platforms. Moreover, it provides useful implications for practitioners by describing the firm's specific platform-building strategy.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.3
• /
• pp.132-150
• /
• 2022

Designated as a national intangible cultural asset, the fish weir is a traditional fishing method and was a leading fishing tool in Korean coastal fishery. As the littoral sea area fishing vessel fishery developed since the 1970s, traditional fishing methods including fish weirs began to decline. The fish weir has been passed down in the form of tools such as fish weirs, stone weirs, and bamboo weirs. In Namhae-gun and Sacheon City in Gyeongsangnam-do, anchovies are caught using bamboo weirs. A basic bamboo weir consists of a fish trap(balgong), a space where fish gather together, and a V- or U-shaped wooden fence(halgaji) that helps fish come inside the fish trap. Its fishing method is to catch fish that have come to the coast during high tide alongside those are stuck inside fish traps(balgong) with nets or scoop nets. This paper examined the process of passing down traditional fishing methods through a comparative analysis of the bamboo weir structures and fishing methods in the Namhae and Sacheon regions. First, the historical process of assembling the current bamboo weir structure was analyzed. The bamboo weir, a fishing tool, appears to have combined the features of past weirs and fish weirs based on the Jijok Strait and Samcheonpo Strait. Next, this paper examined the structure and fishing method of the two types of bamboo weirs made with a circular or square fish trap(balgong) where fish gather. Through this analysis, this study examined the lives of fishermen who have adapted to their natural environment and actively utilized obtainable resources(materials), and then changed the traditional fishing method of bamboo weirs and developed them into an appropriate technology. Lastly, a new value attributed to anchovies caught using bamboo weirs was analyzed. This new value extracted from better bamboo weir anchovies works as a mechanism to uphold the tradition of anchovy-catching bamboo-weir fishing, which produces a smaller amount of anchovies compared to other methods of anchovy fishing. In this way, bamboo weir fishing has been passed down as a result of its differentiated aspect of producing better anchovies than those produced with other fishing methods, as well as the historical aspect of it being a traditional fishing method.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.80-99
• /
• 2012

It is known that there are two Gabong taesil (shrine for King's umbilical cord) of King Danjong, the 6th king of Joseon, remaining today. One of them is Mt. Sogok in Sacheon-city, Gyeongsangnam-do and the other is Mt. Beomnim in Seongju-gun, Gyeongsangbuk-do. The academic sector argued about this matter as there cannot be two Gabong taesil for one king. I once argued that Taesil on Mt. Beomnim in Seongju is King Danjong's Gabong taesil and Danjong taesil in Sacheon is the one for Prince Inseongdaegun, the eldest son of King Yejong. At that time, however, I had not examined the archaeological relics found in these places. In result of making an archaeological approach, I have come to the following conclusions :1. King Danjong had two Taesil : Agi taesil(shrine for baby's umbilical cord) and Gabong taesil. The first Agi taesil was created on Taebong of Mt. Seonseok in Seongju on November 26, 1441, but was moved to Mt. Beomnim in Seongju in 1451 to form the second Agi taesil. In 1458, King Sejo eliminated his Taesil. The stone structures of Gabong taesil still remains on Taebong of Mt. Beomnim, so it has been assumed that King Danjong established them during his reign (1452-1455). 2. Taesil in Sacheon has been known as King Danjong's Taesil because of King Danjong's reinstatement during the reign of King Sukjong. His Taesil was repaired with the reinstatement and King Sukjong was mistaken that Taesil in Sacheon was King Danjong's Taesil to fix it. The time of restoration has been assumed to be soon after the restoration of King Danjong's tomb (1699-1719). Taesil is missing the book of records and rails around the stone structure because the tombs of reinstated kings were restored without rails. 3. It is incorrect that Taesil in Sacheon was known as King Danjong's Taesil, It has been concluded that this Taesil was for Prince Inseongdaegun who was born in 1462. I focused on the fact that Prince Inseongdaegun's Taesil was in Seosamneung Taesil instead of King Danjong's Taesil. When Yiwangjik stored King Danjong's Taesil in Seoul in 1928 and moved it to Seosamneung in 1930, he found that the epitaph on the tombstone recorded that it was Prince Inseongdaegun, not King Danjong, and created Prince Inseongdaegun's Taesil in Seosamneung. I referred to "Taebong", which was created when Seosamneung Taesil was built during the Japanese imperial rule over Joseon, and the relics found in Taesil in Sacheon and Seosamneung.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.2 s.40
• /
• pp.116-126
• /
• 2005

The Precambrian quartzite and calc-schist layers experienced multi-1310ing events are distributed along the two kinds of U-shaped 1310 (Fold I and II) with $N10^{\circ}E-directed$ fo1d axis in Wollong-myeon, Gwangtan-myeon, Jori-myeon of Paju city, the northeastern part of Gyeonggido. Occurrence of 10 layers of quartzite and 4 layers of calc-schist is not clear whether quartzite and schist layers were deposited sequentially each other or one to two layers of quartzite and schist were distributed repeatedly by isoclinal folding and thrusting, because of lack of sedimentary structures. In this paper, we tried to clarify the correlative relationship among the quartzite beds which are distributed along the U-shaped folds using geochemical tools such as rare earth element (REE) patterns and Nd isotope ratio. Quartzites have characteristics of LREE-flattened, HREE- slightly depleted patterns. They also show Ce negative anomaly whereas there are no Eu anomalies. As a result, quartzite beds occurred along the bilateral sides of fold axis show very similar REE patterns from outer side to inner side of 1314. The Nd model age of quartzite layers shows a trend that the inner part of fold is younger than the outer part of it. Such geochemical characteristics suggest that bilateral quartzite beds occurred along the fold axis were derived from the cogenetic source materials. The REE patterns and trace element geochemistry of mica schist intercalated within quartzite indicate that the quartzite and mica schist may be derived from different source materials. Our results suggest that REE and Nd isotope geochemistries may be very useful in clarifying the relationship of sedimentary deposits which do not show stratigraphical and structural connections in the field.