• 한국표면공학회지
• /
• 제49권6호
• /
• pp.560-566
• /
• 2016

In this study, porcelain bonding strength and mechanical properties of sintered Ni-Cr-Ti alloy for dental prosthodontics have been researched experimentally. Mechanical and morphological characteristics of the alloys were examined by Vickers hardness test, tensile and bonding strength test, surface roughness test, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. In the sintered Ni-13Cr-xTi alloys, morphology of sintered alloy showed porous matrix diffused with alloying elements of Cr and Ti, and showed dendritic structure after melting process. From the XRD results, the second phases of NiCr, $Ni_3Cr$, and $Ni_3Ti$ were formed in the case of sintered and melted Ni-13Cr-xTi alloys. The tensile strength and hardness of Ni-13Cr-xTi alloys increased, as Ti content increased. Surface roughness increased, as Ti content increased. The bonding strength between metal and porcelain of Ni-13Cr-5Ti alloy was higher than those of Ni-13Cr and Ni-13Cr-10Ti alloys

• 한국농공학회지
• /
• 제43권5호
• /
• pp.93-105
• /
• 2001

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory as well as in situ test. Effects of grain size, flow water time and aging were investigated using sea and fresh water Converter slag which has a grain size less than 10mm were submerged with fresh water and sea water. In fresh water, the coefficients of permeability in samples A and B were measured as 4.50${\times}$10$^{-2}$ cm per second and 1.20${\times}$10$^{-1}$ cm per second, respectively while as 1.88$\times$10$^{-2}$ cm per second and 3.86$\times$10$^{-1}$ cm per second in sea water. The condition of turbulent flow may exit and was experimentally certified based on the relationship of hydraulic gradient and seepage velocity. After 180 days in using sea water, the coefficients of permeability of samples A and B decreased ten times smaller than those initial values, and after that time continually decreased as for till 360 days. Finally, filling with voids in high-calcium quicklime(CaO) may result in the reduction of coefficient of permeability. In-situ coefficient of permeability however was Practically satisfactory.

• 한국전문물리치료학회지
• /
• 제27권3호
• /
• pp.220-226
• /
• 2020

Esophageal cancer is a representative cancer that occur physical deterioration but, physical problems after surgery were not well reported. The purpose of this study is to report on the long thoracic neuropathy after surgery, and to identify the symptoms and effects of physical therapy after esophageal cancer surgery. This is a case of a 61-year-old man who showed winging of the scapula with long thoracic nerve injury on the results of electromyography after an esophageal cancer surgery. Physical therapy programs were implemented 8 sessions during hospitalization. The quality of life, fatigue, shoulder range of motion (ROM), numeric rating scale (NRS), 6-minute walk test, and 30-second chair stand test were assessed. The quality of life, fatigue, shoulder ROM, NRS (pain), 6-minute walk test, and 30-second chair stand test were improved. However, the esophageal-specific symptom was not different after physical therapy program. As esophageal cancer suffers from physical difficulties after surgery, physical therapy programs are thought to be helpful.

• Journal of Forest and Environmental Science
• /
• 제36권3호
• /
• pp.243-254
• /
• 2020

This study was conducted to develop a forest education program through middle school curriculum linkage. We used the ADDIE model, comprising the five phases of Analysis, Design, Development, Implementation and Evaluation, to secure the objectivity of the program. In the Analysis phase, middle school textbooks were analyzed while considering middle school students' needs for curriculum linkage and the developmental stages of adolescents. The Design phase focused on promoting an understanding of curriculum subjects based on what was reviewed in the Analysis phase and concretized and organized a program that can be implemented in the forest, with a focus on science and physical education, based on the results of middle school students' needs. We also established the objectives and goals of curriculum linkage forest education, established the concept of the program, and selected the educational contents, teaching-learning methods, and evaluation methods. In the Development phase, we developed a 2-night, 3-day program linkage with the middle school curriculum and created a manual for instructors and a workbook for students. In the Implementation phase, we revised and supplemented the program through the first test operation with 24 students in their second year of middle school, after which, we carried out a six-session program for the 2-night, 3-day as the second test operation with 17 students in their second year of middle school. In the Evaluation phase, the program was evaluated by the students who participated in the second test operation using questionnaires on satisfaction and curriculum linkage understanding as well as rating scales for attitudes toward forests and environmental sensitivity. The results showed that middle school students showed positive significance in satisfaction and understanding of the middle school curriculum as well as attitudes toward forests and environmental sensitivity through the forest education program.

• 공학교육연구
• /
• 제16권6호
• /
• pp.3-10
• /
• 2013

The purpose of this study is to design the instructional model to develop logical thinking competency of engineering students and to investigate the effect of the model. The instructional model is composed of the virtual context (films were provided), problem solving, feedback, another problem solving with different perspectives, feedback. The process is looped. The results showed statistically significant improvements between pre- and post-test. The first standardized test of critical thinking showed the improvement from pre-test to post-test (d=0.646). The second test of logical thinking showed the improvement from pre-test to mid-term test (d=0.753) and improvement from mid-term to post-test (d=1.529).

• 한국축산시설환경학회지
• /
• 제3권1호
• /
• pp.35-42
• /
• 1997

The purpose of this study is to investigate the effect of the biologically treated animal wastewater as a liquid fertilizer in the paddy rice. The treated water has content of the ammonia nitrogen 24mg/I and nitrate 40 mg/I on an average in the first year. A trace of nitrite has been shown. The phosphate content was 92 mg/I on an average. The amount of yielded rice was 365kg/10a for test 1 (no fertilizer), 388dg/10a for test 2(chemical fertilizer), 526kg/10a for test 3 (treated water) respectively. The treated water showed 35% more in production than the chemical fertilizer. The treated water has content of the ammonia nitrogen 40mg/I and nitrate 67mg/I on an average in the second year. A trace of nitrite has been shown. The phosphate content was 57mg/I on an average. The amount of yielded rice was 402kg/10a for test 1, 505kg/10a for test 2, 607kg/10a for test 3 respectively. Yield of unhulled rice was 20% more in the plot of treated water than that of chemical fertilizer.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권9호
• /
• pp.1209-1216
• /
• 2005

This study aimed to use field data collected by the Hokkaido Dairy Cattle Milk Recording and Testing programs to estimate genetic parameters for concentration of milk urea nitrogen (MUN) and predicted Digestive Crude Protein Percentage of requirement (DCPun). Edited data consisted of 5,797,500 test-day records of MUN and yields of milk, fat, and protein obtained from 783,271cows in Holstein herds in Hokkaido, Japan. Data were divided into four datasets; for the first, second, third and fourth lactations. Two analyses were performed on data from each lactation. First, ANOVA was used to estimate the significance of the effects of several environmental factors on MUN and DCPun, after absorbing the Herd-Test-Day (HTD) effects. The effects of DIM and age.season effects had significant impact on MUN and DCPun. The second used a multi-traits repeatability model (MTRM) to estimate heritabilities and genetic correlations of milk with MUN and DCPun. Heritability estimates for MUN and DCPun in the first, second, and third lactations were 0.21:0.16, 0.20:0.16, and 0.20:0.18, respectively. Genetic correlations for milk with MUN and DCPun in the first, second, and third lactations were 0.02 - 0.17, and -0.25 - -0.39, respectively. The results indicate that MUN and DCPun are possibly effective tools for improving the energy balance, but that the relationships between MUN and other economically important traits such as feed efficiency, metabolic disease and fertility are still necessary.

• Tribology and Lubricants
• /
• 제16권1호
• /
• pp.33-38
• /
• 2000

Abstract- In this paper tribological characteristics of solid and liquid phase sintered W/C-35%Ni tappets were investigated. Three test methods were performed to investigate the wear and surface damage mechanism of sintered tappets. First, block-on-ring wear test was performed to investigate the wear characteristics under pure sliding condition. Second, simplified cam and tappet tests (called component wear test hereafter) were carried out to simulate the real contact history of cam and tappet. Also, after the test, contact surfaces were analyzed with scanning electron microscope to study the wear mechanism. As a final screening, engine dynamo tests were performed. Results showed that in the block on ring sliding wear test, solid phase sintered specimens showed superior wear resistance to liquid phase sintered specimens. The component wear tests and engine dynamo tests also showed the same results. Therefore, in these tests, solid phase sintered tappet material revealed superior wear resistant properties to liquid phase sintered one.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.1-8
• /
• 2017

목적: 이 연구의 목적은 구강스캐너를 이용하여 제작된 임플란트 수술용 형판의 무치악 거리에 따른 정확성을 비교하는 것이다. 재료 및 방법: 방사선불투과성 아크릴 레진을 이용하여 상악 좌우 제2소구치, 제1대구치, 제2대구치 부위를 치아상실 상태로 5개의 상악 모형을 제작하고 각각의 모형을 구강스캐너를 이용하여 가상 모형을 획득하였다. 모형의 술전 CT DICOM file과 가상의 모형을 중첩 후 치아 상실 부위에 임플란트 식립을 계획하였고 제작된 수술용 형판을 이용하여 임플란트 식립 후 술후 CT 촬영을 시행하였다. 술전 CT와 술후 CT를 software상에서 중첩 후 X, Y, Z축을 이용하여 임플란트의 platform과 apex 부위에서, 계획된 임플란트와 실제 식립된 임플란트의 거리 및 각 오차를 측정하고 Kruskall-Wallis test와 Mann-Whitney test를 사용하여 통계분석을 시행하였다. 결과: 임플란트 식립 각도 오차는 제2소구치에서 제2대구치로 갈수록 커졌으나 통계적 차이를 보이지 않았고 platform 부위와 apex부위에서의 식립 거리 오차 또한 제2소구치에서 제2대구치로 갈수록 커지나 제2대구치에서는 통계적으로 유의성 있는 큰 오차를 보였다. 결론: 임플란트 식립 각도에서는 계획된 임플란트와 식립된 임플란트간 통계적 차이는 없었으나 platform과 apex 부위에서의 식립 거리는 제2대구치 부위의 임플란트에서 더 큰 오차를 보였으며 통계적으로 유의할 만한 차이를 보였다.

• ETRI Journal
• /
• 제34권2호
• /
• pp.184-189
• /
• 2012

In this paper, we propose a novel approach to statistical model-based voice activity detection (VAD) that incorporates a second-order conditional maximum a posteriori (CMAP) criterion. As a technical improvement for the first-order CMAP criterion in [1], we consider both the current observation and the voice activity decision in the previous two frames to take full consideration of the interframe correlation of voice activity. This is clearly different from the previous approach [1] in that we employ the voice activity decisions in the second-order (previous two frames) CMAP, which has quadruple thresholds with an additional degree of freedom, rather than the first-order (previous single frame). Also, a soft-decision scheme is incorporated, resulting in time-varying thresholds for further performance improvement. Experimental results show that the proposed algorithm outperforms the conventional CMAP-based VAD technique under various experimental conditions.