• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.40-61
• /
• 2017

This study investigated material characteristics of composition and variable strength measurement using physicochemical and petrographic analysis for lime-soil mixture barrier tombs of Guri Galmae site in Joseon Dynasty. The tomb barriers are composed mainly of microcrystalline calcite, quartz, feldspar and mica with lime matrix. The lime matrix shows compact sheet texture, and some samples show hydration aggregates with needle-shaped textures. Gypsum occurred as a secondary process where carbonization reactions were poor. Concentrations of CaO in the tomb barrier very widely ranged from 4.43 to 36.19 wt.%, specific gravity and absorption ratio of the materials show of 1.35 to 1.62 and 20.1 to 32.6%, respectively. As the rebound hardness, the materials ranged from 10.0 to 28.4 (mean 15.7). The values are higher in the $-90^{\circ}$ direction rather than in the $0^{\circ}$ direction with the consequence that the values indicate more strength toward the vertical direction. Difference in strength by directions was caused by the directions of the tomb barriers, which is related to the processes in each stage. In the tomb barriers, ultrasonic velocity and unconfined compressive strength ranged from 1,049.2 to 1,728.9m/s and under 5.00MPa, respectively. Variation patterns between the two are very similar in values. As the result of composition and strength, the materials of higher contents on CaO are higher in strength values. Generally, techniques and skills to make the lime-soil mixture barriers are interpreted as low qualities in relatively.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.1
• /
• pp.15-24
• /
• 2019

There are beautiful scenery with columnar jointing at 15 valley of southern slope of the Wangtian'e volcano in Mt. Baekdu volcanic field. The compositions of phenocryst minerals which have porphyritic textures in mafic volcanic rocks of this area were carried out. The Wangtian'e volcano consists of Changbai basalt~trachybasalt (lower part) and Wangtian'e basaltic trachyandesite~trachyte~alkali rhyolite (upper part). This study is focused on the mafic rocks of the Changbai trachybsalt and the Wangtian'e basaltic trachyandesite. Main phenocrysts are feldspar, pyroxene and olivine. The major element compositions of the phenocrysts were analyzed using EPMA. Plagioclase phenocrysts of the Wangtian'e basaltic trachyandesite are located at the border of andesine and oligoclase ($An_{24.1{\sim}36.0}$) in the An-Ab-Or diagram, and those of the Changbai trachybasalt are labradorite ($An_{54.2{\sim}65.2}$). Pyroxene phenocrysts are augite. Olivine phenocrysts of the Changbai trachybsalt are crysolite ($Mg_{0.79-0.77}Fe_{0.21-0.23}$) and microphenocrysts in the groundmass are hyalosiderite ($Mg_{0.58-0.56}Fe_{0.42-0.44}$). Calculated crystallization temperature of olivine phenocrysts is $1196{\sim}1123^{\circ}C$, clinopyroxene is $1122{\sim}1112^{\circ}C$, phenocrysts and laths of plagioclases are $1118{\sim}1107^{\circ}C$ and $1091{\sim}1089^{\circ}C$, respectively. The temperatures suggests that the olivine phenocrysts, clinopyroxene, plagioclase phenocrysts, and plagioclase laths were crystallized in the magma chamber in sequence.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.295-307
• /
• 2022

We studied the Cretaceous Jeonggaksan Formation to determine depositional processes of pyroclastic density currents entering into the lacustrine environments. This formation is composed largely of sandstone-mudstone couplets and (tuffaceous) normally graded sandstones deposited in lacustrine environments, interbedded with two pyroclastic beds: welded massive lapilli tuff and normally graded lapilli tuff. The welded massive lapilli tuff (10 m thick) is composed of poorly sorted, structureless lapilli supported by a welded ash matrix. The normally graded lapilli tuff (4 m thick) is characterized by moderately to well sorted natures and multiple normally graded divisions in the lower part of the bed with internal boundaries. The contrasting depositional features between these lapilli tuff are suggestive of different physical characteristics and depositional processes of pyroclastic density currents in the lake. Overall poorly sorted and massive natures of the thick, welded massive lapilli tuff are interpreted to have been formed by rapid settling of pyroclastic sediments from highly concentrated and sustained pyroclastic density currents. In this case, the pyroclastic density currents were able to displace lake water from shoreline and the pyrolclastic density currents preserved their own heat except for frontal parts of the currents. As a result, welded textures can be formed despite entrance of pyroclastic density currents into the lake. The internal boundaries of the normally graded lapilli tuff reflect unsteady natures of the pyroclastic density currents at the time of the deposition and the pyroclastic density currents can not provide sufficient pressure to displace lake water. As a consequence, the pyroclastic density currents transformed into water-saturated turbidity currents, forming relatively well sorted, normally graded lapilli tuff.

• Economic and Environmental Geology
• /
• v.55 no.1
• /
• pp.53-61
• /
• 2022

The Gasado Au-Ag deposit is located within the south-western margin of the Hanam-Jindo basin. The geology of the Gasado is composed of the late Cretaceous volcaniclastic sedimentary rocks and acidic or intermediate igneous rocks. Within the deposit area, there are a number of hydrothermal quartz and calcite veins, formed by narrow open space filling along subparallel fractures in the late Cretaceous volcaniclastic sedimentary rock. Vein mineralization at the Gasado is characterized by several textural varieties such as chalcedony, drusy, comb, bladed, crustiform and colloform. The textures have been used as exploring indicators of the epithermal deposit. Mineral paragenesis can be divided into two stages (stage I, ore-bearing quartz veins; stage II, barren carbonate veins) considering major tectonic fracturing event. Stage I, at which the precipitation of Au-Ag bearing minerals occurred, is further divided into three substages (early, middle and late) with paragenetic time based on minor fractures and discernible mineral assemblages: early, marked by deposition of pyrite and pyrrhotite with minor chalcopyrite, sphalerite and electrum; middle, characterized by introduction of electrum and base-metal sulfides with minor argentite; late, marked by argentite and native silver. Au-Ag-bearing mineralization at the Gasado deposit occurred under the condition between initial high temperatures (≥290℃) and later lower temperatures (≤130℃). Changes in stage I vein mineralogy reflect decreasing temperature and fugacity of sulfur (≈10^-10.1 to ≤10^-18.5atm) by evolution of the Gasado hydrothermal system with increasing paragenetic time. The Gasado deposit may represents an epithermal gold-silver deposit which was formed near paleo-surface.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.69-80
• /
• 2016

The present study was to survey the site environment, vegetation structure and soil characteristics in the wild habitats of Acer tegmentosum Maxim. and offers basic information for habitats conservation and restoration. Most of the wild habitats were located at altitudes between 605~1,413m with inclinations ranged as 8~30°. The bare rock rate were 8~50%. The vegetation structure by the PC-ORD based on the Two Way Cluster Analysis were divided into three groups Community I(Acer tegmentosum - Quercus mongolica), Community II(Acer tegmentosum - Carpinus cordata), Community III(Quercus mongolica - Tilia amurensis). The species diversity(H') was highest in Community II as 1.474, Community I was 1.471, Community III was 1.219. The soil textures were Clay loam, The average soil pH was 4.8, Soil organic matter was 15.15% and available phosphorus was 2.33ppm. Ordination analysis result by soil characteristics, community, characteristic species showed that the greatest effect factors were slope, altitude, tree and shrub's cover rate, organic matter, total-nitrogen, calcium, magnesium. Correlation analysis between environment factor result showed that O.M. - (T.N., K+, Mg2+, CEC, EC), T.N. - (K+, Mg2+, CEC, EC) were positive correlations.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.531-536
• /
• 2011

This study was conducted to investigate the effects of cultural soil textures on growth and quality of Glycyrrhiza uralensis Fischer from 2009 to 2010. The obtained results from this study were summarized as follows; The growth of stem and leaf were superior to one year old G. uralensis, and surface runner and root growth tended to be better in 2 years old G. uralensis. The weight of stem and leaf were heavy in sandy loam, and plant height, branches, stem diameter in sandy clay loam were better than other soil texture. The growth characteristics, such as length, number and weight of surface runner, was better in order of sandy clay loam > sandy loam > loamy sand. The length of main and lateral root was longer in loamy sand soil than other treatments, and the diameter of main and lateral root was more thicker in sandy loam than others. The number of lateral root was higher in the sandy loam than other treatments. The yield of main and lateral root was in order of sandy loam > sandy clay loam > loamy sand soil. Marketable root yield of one year old and two year old G. uralensis were increased 57% and 71% in sandy loam compare to a loamy sand as 204 kg/10 a, respectively. The content of glycyrrhizinic acid was the hightest as 1.62% in sandy clay loam soil in one year old, and as 1.58% in sandy loam soil in two years old of G. uralensis, respectively.

• Food Science and Preservation
• /
• v.30 no.5
• /
• pp.896-904
• /
• 2023

The texturization characteristics of textured vegetable protein (TVP) were investigated based on the extent of soybean decoating during the pretreatment of defatted soybean flour used for TVP. The raw materials for TVP consisted of 50% defatted soybean flour, 30% gluten, and 20% corn starch. The weight ratios of soybean seed coat to soybean flour were 9%, 6%, 3%, and zero. Extrusion was performed using an extruder equipped with a cooling die, maintaining a barrel temperature of 190℃ and screw speed of 250 rpm, Water was injected at a rate of 9 rpm using a metering pump. Regarding the textures of the extruded TVPs produced from defatted soybean flour, an increase in the soybean seed coat content led to a decrease in the apparent fibrous structural layer and an increase in hardness. However, there were no significant changes in elasticity and cohesion. Moreover, as the soybean seed coat content increased, the pH of TVPs decreased. A higher soybean seed coat content also tended to lower the moisture content, increasing water absorption, solids elution, and turbidity. These results suggest that an increased seed coat content reduces the proportion of protein, and the fibers present in the seed coats prevent texturization.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.63-72
• /
• 2024

The size of the home interior market is growing rapidly as interest in interiors and self-interiors has increased due to the recent rapid increase in single-person households. Most of the Bathroom remodeling is done by requesting an offline interior contractor and then visually checking it in the final completion stage, so it is not easy to re-construct even if the customer is dissatisfied. Therefore, this study developed an immersive virtual reality-based Bathroom self-remodeling system that can visually check space and design from the design stage to the final stage by incorporating VR technology to feel realistic in virtual reality. The bathroom structure may select the basic structure of the predefined bathroom space or freely set the size of the bathroom space. For furniture items, you can choose the washbasin, toilet, bathtub, shower booth that are essential elements of the bathroom and others(mounting rack, trash bin, handle). The tile texture may change the texture of the selected tile at a desired wall position by selecting various textures. In particular,, the texture of the wall tile can be varied by selecting horizontal, vertical and inclined directions at the desired angle according to the needs of the user and the contractor. As a future research project, this system will enable indoor sharing between users who are physically far away in real-time, allowing direct experience in virtual spaces, connection to purchases, and request estimates.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.36-44
• /
• 2024

Copper electrodeposition technology is essential for producing copper films and interconnects in the microelectronics industries including semiconductor packaging, semiconductors and secondary battery, and there are extensive efforts to control the microstructure of these films and interconnects. In this study, we investigated the influence of crystallographic orientation on the local plastic deformation of copper films for secondary batteries deformed by uniaxial tensile load. Crystallographic orientation maps of two electrodeposited copper films with different textures were measured using an electron backscatter diffraction (EBSD) system and then used as initial conditions for crystal plasticity finite element analysis to predict the local plastic deformation behavior within the films during uniaxial tension deformation. Through these processes, the changes of the local plastic deformation behavior and texture of the films were traced according to the tensile strain, and the crystal orientations leading to the inhomogeneous plastic deformation were identified.