• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.876-887
• /
• 2018

In this paper, we propose an robust CAMShift method to track stage objects with a camera. In order to solve the problem of tracking object misdetection in existing CAMShift technique, MBR region is detected to separate the background and the subject, and the subject size of the region of interest is calculated to solve the problem of erroneously detecting a large region having a similar color distribution ratio. Also, by applying the color corelogram and MB-LBP to the part that can not be solved by the color ratio and the size limitation, accurate texture tracking is enabled by reflecting the texture characteristics. Experimental results show that the proposed method has good tracking performance for objects that do not deviate from the size of the subject set in the area of interest and accurately extracts the texture characteristics of different subjects with similar color distribution ratios.

• Korean Journal of Crystallography
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2001

X-ray microdiffraction which uses x-ray beam focused down to a micron size from synchrotron radiation sources allow precision measurements of local orientation and strain variations in polycrystalline materials. Using x-ray microdiffraction setup at Pohang Light Source, we investigated the tex-ture of Cu interconnects with various widths on Si wafer by collecting Laue images and focused to about 2×3㎛ ² in size. Our results show that 1㎛ wide Cu interconnect had grains in rather ran- dom orientation. On the other hand the 20㎛ wide interconnects showed a 〈111〉fiber texture near the center. The grains were 2∼5㎛ long at the 1㎛ wide interconnect and 6∼8㎛ in size at the 20㎛ wide interconnect.

• Journal of the Korea Computer Graphics Society
• /
• v.28 no.2
• /
• pp.21-28
• /
• 2022

ASTC is one of the standard texture formats supported in OpenGL ES 3.2 and Vulkan 1.0 (and later versions), and it has been increasingly used on mobile platforms (Android and iOS). ASTC's most important feature is the block size configuration, thereby providing a trade-off between compression quality and rates. With the higher number of textures, however, it is difficult to manually determine the optimal block sizes of each texture. To solve the problem, we present a new approach based on PSNR values to automatically determine the ASTC block size. A brute-force approach, which compresses a texture on all block sizes and compares the PSNR values of the compressed textures, can increase the compression time by up to 14 times. In contrast, our three-step approach minimizes the compression-time overhead. According to our experiments on a texture set including 64 various textures, our method determined the block sizes from 4×4 to 12×12 and reduced the size of compressed files by 68%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.138-141
• /
• 2001

The evolution of lectures and microstructure during the warm-rolling and subsequent annealing in aluminum 3004 alloy sheets was investigated by employing X-ray texture measurements and microstructure observations. Whereas the typical $\beta$-fiber orientations with the strong Bs-orientation $\{112\}<110>$ formed in the normally cold-rolled specimen, the warm-rolling at $250^{\circ}C$ led to the development of a strong through thickness texture gradient which was characterized by shear texture at the surface layer and rolling textures at the center layer After warm rolling, ultra-fine grains formed in the thickness layer with shear texture components. Upon recrystallization annealing, the $\{001\}<100>$ Cube-texture developed at the expense of normal rolling texture components the rise to the formation of corase recrystallized grains. However, in the layer with shear texture components the continuous recrystallization took place and the fine grain size persisted even after recrystallization annealing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.184-186
• /
• 2002

The evolution of texture and microstructure during warm rolling and subsequent annealing in aluminium 3004 alloy sheet was investigated by X-ray texture measurements and microstructure observations. Warm rolling at 250$^{\circ}C$ led to the development of strong through thickness texture gradients with shear textures at the surface layer and a regular rolling texture in the center of the sheets. FEM simulations indicated that these texture gradients are caused by pronounced strain gradients throughout the sheet thickness. Upon recrystallization annealing, in the sheet center the characteristic cube-recrystallization texture developed, while in the surface layers with a pronounced shear texture continuous recrystallization took place which led to the formation of a very fine grained microstructure. It is concluded that the very complex strain history in the near-surface layers together with the resulting high work-hardening rate gave rise to the formation of the ultra-fine grains with an average size smaller than 2$\mu\textrm{m}$.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.989-991
• /
• 1995

In this paper, we present a new morphological texture spectrum approach to obtain a surface orientation using the variation of texture image caused by projective distortions. Under the assumption that the surface of texture image is smooth continuous, and specially plane or sphere, we apply the mathematical morphology and texture spectrum in order to compute the 3-D surface orientation. If the surface of texture image is plane, the surface orientation can be obtained through a simple procedure. If the surface of texture image is sphere, we find the centroids of texels, and may compute several major axes, their slopes, and vanishing points. Using the texture spectrum between the intersections of the vanishing points and the size of elements in each texels, we can find the surface orientation of texels on the sphere.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.266-271
• /
• 2004

The aim of this paper is to investigate the effect of surface texturing on reduction friction and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.1
• /
• pp.72-80
• /
• 1994

In this paper, a new variable block-size transform coding algorithm using information of segmentation is proposed. In general variable block-size transform coding algorithms, the information which is used to form variable blocks is thrown away, but in the proposed algorithm, the information of segmentation which is composed of texture and contour information is maintained for efficient coding. That is, the number of blocks can be reduced by contour information, a DC component of block can be predicted by texture information, and the region compensation, which reduces mean difference between regions, using texture and contour information can diminish the magnitude of AC components. The result is that the proposed algorithm has improved highly the coding efficiency of DC and AC components.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1145-1150
• /
• 2005

The aim of this paper is to investigate the effect of surface texturing on metal surface and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 is recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.

• Journal of Korea Foundry Society
• /
• v.15 no.4
• /
• pp.397-407
• /
• 1995

The objectives of this study are first, to expand our understanding of relationship between magnetic properties and microstructural features such as grain size and texture, and second to reduce core loss of Fe-6.5%Si strip through optimizing heat treatment conditions. A rapid solidification technique, planar flow casting(PFC), was adopted to produce Fe-6.5%Si strips. The strips were heat treated under various conditions. The results show that heat treatment conditions can change not only grain size but also (200) texture formation on the strip surface. Variation in magnetic properties of Fe-6.5%Si strip is analyzed in terms of the change in grain size as well as (200) texture on the strip surface. The heat treatment conditions of $1100^{\circ}C$ over 2 hr or $1150^{\circ}C$ $1{\sim}2hr$ in $N_2+5%H_2$ appear to minimize core loss of Fe-6.5%Si strips.