• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.194-197
• /
• 2013

We investigated the effect of etching time on the surface roughness, and electrical and optical properties of ZnO and 2 wt% Al-doped ZnO (AZO) films. The ZnO and AZO films were deposited on glass substrates by RF magnetron sputtering technique. The etching experiment was carried out using a solution of 5% HCl at room temperature. The surface roughness was characterized by Atomic Force Microscopy. The electrical property was measured by Hall measurement system and 4-point probe. The optical property was characterized by UV-vis spectroscopy. After the wet chemical etching, the surface textures were obtained on the surface of the ZnO and AZO films. With the increase of etching time, the surface roughness (RMS) of the films increased and the transmittance of the films was observed to decrease. For the AZO film, a low resistivity of $1.0{\times}10^{-3}\;{\Omega}{\cdot}cm$ was achieved even after the etching.

• Journal of the Korean Society of Food Culture
• /
• v.31 no.6
• /
• pp.605-615
• /
• 2016

The objective of this study was to prepare acorn bread added with soymilk in order to improve its quality and develop the best possible recipe. The loaf volume, color, texture and sensory evaluation of acorn bread added with soymilk 10~40% were measured during the storage period. The L-value significantly decreased upon addition of 40% soymilk. A-value increased, but b-value decreased. During the storage period, the L- and a- values increased except 2 days at room temperature and 7 days in a freezer, whereas b-value decreased. For textural measurement, hardness, springiness, gumminess and brittleness increased significantly upon addition of soymilk. However cohesiveness decreased for 2 days of storage, whereas gumminess and brittleness for 1 day of storage at room temperature. Freezer storage for 1 day reduced cohesiveness, and gumminess for 4 and 7 days, respectively, and brittleness after all storage periods. The sensory evaluation showed that acorn bread added with soymilk 20% produced the best results in color and taste. The bitter aftertaste increased according to addition of soymilk with lower scores. Softness, chewiness and overall preference decreased significantly. Therefore, 10% soymilk addition got the best scores in aftertaste, softness, chewiness and overall acceptances.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.131-136
• /
• 2002

As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

• Korea Journal of Cosmetic Science
• /
• v.2 no.1
• /
• pp.33-46
• /
• 2020

Cosmetics are representative complex fluids, and there have been many studies focusing on the correlation between the rheological properties and sensory attributes. Various instrumental measurements have been suggested to evaluate the sensory attributes, and one of the most common instruments is Texture Analyzer (TA). Although it is reported that the adhesiveness measured by TA is related to the stickiness of cosmetics, there exists reproducibility problem because measurements with TA are sensitive to application conditions. In this study, an instrumental protocol using rotational rheometer has been set up to measure the stickiness of cosmetics. This protocol consists of two steps. The first step is a preconditioning step, and various types of shear deformations are applied to the samples. The next step is the extensional flow and the axial force is measured. When the amplitude of the shear flow corresponded to the linear viscoelastic region, the axial force is the same as those without preconditioning. On the other hand, an axial force decreases as variation nonlinearity increases. It is because the effects of microstructure changes caused by nonlinear deformation affects the extensional flow. It is worth noting that a new protocol facilitates to evaluate the stickiness of cosmetics in a more systematic way.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.1-12
• /
• 2016

This study was carried out for the improvement of nutrition and quality of streamed bread. For this purpose, brown rice liquid starter and brown rice sourdough were made and steamed bread was made with different amounts of starter addition followed by a measurement of its physicochemical and sensory characteristics. The pH of dough and titratable acidity tended to decrease significantly according to brown rice sourdough. In addition, the titratable acidity of the control group had significant different by samples. As for the volume of dough, there was no significant difference between the control sample and each sample, but after 15 minutes of fermentation, the volume increased the most in the control sample, with sample D having the least volume. As for volume and specific volume of steamed bread, sample B had the largest at 3.34 and each sample had significant differences based on fermentation time. As for diameter, sample B was the largest at 88.11 and sample D was the smallest at 79.04, with significant differences among samples. As for height of steamed bread, the control group was the highest at 42.91 and sample D was the lowest at41.87, with significant differences among samples. As for the cross-section structure of steamed bread, the porous of sample B, which had the largest volume and specific volume, was the largest with uniform texture and even distribution. L value tended to be higher in the added sampleroups than in the control sample. a value increased as brown rice sourdough increased, and b value was lower when volume and specific volume of the steamed bread increased, which showed a similar trend with that a L value. As for hardness, viscosity, and chewing capacity, sample D was the highest and sample B was the lowest, with significant differences among samples. As a result of measurement of overall preference, sample B had the highest preference with the highest preference in flavor, taste, appearance and texture, and D had the lowest preference with the lowest preference in taste, appearance and texture, with significant differences among samples.

• Korean journal of food and cookery science
• /
• v.2 no.1
• /
• pp.45-53
• /
• 1986

This study was conducted to investigate the effects of the properties of sugar (20％, 30%) and starch (l5％, 20%, 25％) to Angdo on Angdo Pyun's preference, texture and color_ Textural characteristics were examined through sensory evaluation, Rheometer. Color test by Color and color difference meter. The properties through sensory evaluation were appearance, color, flavor, hardness, thickness and acceptability. With Rheometer, compression force, work ratio, adhesive work and gumminess were measured. With Color and Color difference meter, L, a ana b were measured. The results were as follows: 1. Sensory evaluation indicated that with the increase of starch addition, the Angdo Pyun maintained a worse apperance and got hardened and thickened. As the amount of suger increased, the Angdo fyun maintained better in color and flavor as well as its acceptability. 2. Rheometer measurement indicated that a compression force, work ratio, adhesive work and gumminess tended to increase, as the starch proportion increased. As the amount of sugar increased, the Angdo Pyun maintained a greater adhesive work, work ratio and gumminess. 3. Color and Color difference meter indicated that figure L ana a tended to increase and b, ΔE and ΔC decrease, as the starch proportion increased. 4. In the analysis of correlation between hardness and compression force, it was found that they are highly related. In view of the above results, it came to the conclusion that Angdo Pyun with the addition of 30％ sugar and 15％ starch could give the best result among the groups studied.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1983

The results of COLE(Coefficient of Linear Extensibility) measurement on various paddy soils in Korea are summarized as follows; 1. The COLE values of paddy soil in Korea varied from 0.024 to 0.094 in the surface soil while in the sub-surface soils those were ranging from 0.022 to 0.115. The poorer the relative drainage and the finer the texture caused, the greater the COLE values. 2. The matured clayey soils on fluvio-marine plains and local alluvium derived from the Tertiary materials have COLE values more than 0.09 which is demonstrated that the necessity of COLE measurement throughout profiles so that could be considered the characteristic in the characteristic of those soils. 3. The clay content has the highest positive correlation (r=0.81~0.76) values. The content of organic matter, water content at 1/3 bar, Atterberg limits, water stable aggregate etc. also have significant positive correlation with COLE values while the context of sand and silt show negative correlation. 4. Although the COLE values measured on horizontal linear bases were slightly greater than those measured on volume bases practicability was for granted. For more accurate measurement of COLE, it is reasonable to have the average values of COLE calculated from the horizontal and vertical bases.

• Culinary science and hospitality research
• /
• v.20 no.1
• /
• pp.120-132
• /
• 2014

This study was to investigate the undergraduates in Gyeongsan city, an area heavily populated with students, on their awareness of and their satisfaction with the local traditional food to suggest an effective marketing direction to town restaurants and to provide them with useful information to activate their business. The samples were taken by the convenience sampling method and the measurement was done by 5 points-Likert. The result was as follows. The students recognized that cleanliness(4.69 points), food texture(4,57 points), the freshness of food materials(4,56 points) and food price(4.20 points) were important. However, they considered the legitimacy of local traditional foods(3.59 points), the supplementary explanation of food(3.58 points) and the quantity of food(3.34 points) as less important. On the level of satisfaction with the food, they were highly satisfied with food taste(3.55 points), food flavor(3.47 points) and quantity(3.39 points), while showing relatively low satisfaction with food creativity(2.94 points), food originality(2.75 points) and the explanation of food(2.61 points). The result of IPA indicated that the food texture, food cleanliness, the freshness of food materials, food flavor, food taste and food nutrients were thought to be important among customers, to be kept well by the restaurants and to be shown as the items to be maintained further. The customers took other items like menu price and the creativity of menu to be important, but their satisfaction with these items were low due to lack of practice. Therefore, those items should be managed intensively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1340-1345
• /
• 2010

The study investigated on quality characteristics of pan breads prepared with 0, 1, 3 and 5% flowering cherry (Prunus serrulata L. var. spontanea Max. wils.) fruit powder. The pH of dough and bread decreased with the addition of flowering cherry fruit powder, whereas the weight of bread increased. The volume, specific volume and baking loss rate of the breads decreased as flowering cherry fruit powder levels increased. The volume of dough during fermentation of bread containing flowering fruit cherry powder was smaller than those of the dough without flowering cherry fruit powder. Lightness (L) and yellowness (b) of breads crumb and crust color were decreased as the concentration of flowering cherry fruit powder increased; however, the redness (a) was increased. In the texture analyzer measurement, hardness and chewiness of the breads were significantly increased by adding the powder but cohesiveness was decreased. There was no significant difference in springiness. The antioxidative activity measured by DPPH radical scavenging activity of bread increased as the concentration of flowering cherry fruit powder increased. The bread containing 3% flowering cherry fruit powder has acceptable sensory properties. such as color, smell, taste, chewiness, texture and overall acceptability. The results exhibited that adding the flowering cherry fruit powder into the bread increased antioxidant activity, and the highest quality improvement was obtained by incorporating 3% flowering cherry fruit powder into the bread formula.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1703-1708
• /
• 2004

This study was carried out to investigate the characteristic quality of jeungpyun added Paecilomyces japonica with different fermentation time. The volume of jeungpyun added Paecilomyces japonica was more increased after fermentation. The volume was decreased when the fermentation was progressed. The pH was 5.1 before fermentation and the pH decreased when the fermentation was progressed. Moisture content was more increased as the time of fermentation became longer. Hunter color test, L value and b value appeared the highest after 1st fermentation, and it appeared lesser when the time of fermentation became longer. In measurement of texture, hardness showed the highest value when 90 minutes passed after the 2nd fermentation. Gumminess and brittleness were tend to increase when it have longer fermentation time. In scanning electron microscopic observation, organization of sponges was tend to break down as the fermentation time was longer. Sensory properties showed that color intensity was more strong when second fermentation was progressed, and hardness, toughness, sourness were high when the fermentation time was longer. In conclusion overall acceptability of jeungpyun, 3$0^{\circ}C$, 3 hours after 1st fermentation and 2nd fermentation for 30 minutes, 35$^{\circ}C$ showed the most preference.