• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.218-223
• /
• 2000

Color removal of dyeing wastewater is becoming more important due to intensive limitation on color unit of effluent water, so this study was to investigate an efficient color removal of dyeing wastewater. We found that bittern+iron chloride(II) inorganic coagulant developed by Kabool research center is much higher than any other inorganic coagulants for color removal. Optimum pH of this coagulant was 10.5 and removed more than 90% for color removal efficiency. The results showed that COD and color unit of effluent water was average 60mg/L and 200~250 units when continuous activated sludge test after coagulation with this coagulant has done. From the results of the experiments, the application of bittern+iron chloride(II) inorganic coagulant can save the operating cost of wastewater treatment plants.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.75-81
• /
• 1997

o-Aminobenzene sulfone-N-ethylanilide, the diazo component of C.I. Acid Red 57, is currently being diazotised by the use of nitrosylsulphuric acid because of its high molecular weight and weak basicity. However, this method has many problems such as complicated manufacturing process and discharge of large volume of strong acidic effluent. In this study, the possibility of replacing nitrosylsulphuric acid method by direct method, which is simpler and produces less effluent, has been checked and the optimum process condition was studied. The effect of HCl concentration, the amount of sodium nitrite and particle size of diazo component on diazotisation yield was investigated. The optimum pH condition for coupling reaction was also evaluated.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.1-11
• /
• 2018

Textile factories are one of the industries which its wastewater treatment is a challenging issue, especially in developing countries and a conventional treatment cannot treat all its pollutants properly. Using chemical coagulants is a technique for physical and chemical primary treatment of the wastewater. We applied jar test for selection of suitable coagulant among the five coagulants including alum, calcium hydroxide, ferrous sulfate, ferrous chloride and barium chloride for the effluent of wastewater in Mazandran textile factory located in Mazandran Province, Iran. In addition, jar test, we also used analytic hierarchy process (AHP) method considering criteria which included coagulation cost, sensitivity to pH change, the amount of sludge generation and side effects for coagulation. The results of the jar test indicated that calcium hydroxide was proper among the coagulants which it removed 92.9% total suspended solid (TSS), 70% dye and 30% chemical oxygen demand. The AHP analysis presented that calcium hydroxide is more suitable than other coagulants considering five criteria.

• Membrane and Water Treatment
• /
• 제5권3호
• /
• pp.197-205
• /
• 2014

For the first time in Bangladesh, a bench scale membrane bioreactor (MBR) unit was tested in treating a textile wastewater in the industry premises of EOS Textile Mills LTD, Dhaka for three months. The performance of the unit was compared with that of the conventional activated sludge treatment plant, which is in operation in the same premises. The COD and BOD removal efficiency of the MBR unit reached to around 90% and 80% respectively in 20 days whereas the removal efficiency of the conventional treatment plant was as low as 40-50% and 38-40% respectively. The outlet COD and the BOD level for the MBR unit remained stable in spite of the fluctuation in the feed value, while the conventional effluent treatment plant (ETP) failed to keep any stabilized level. The performance of the MBR unit was much superior to that of the functional ETP and the water treated by the MBR system can meet disposal standard.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.293-306
• /
• 2014

The present study primarily focuses on the evaluation of the comparative effect of chemical coagulation and ultrasonication for elimination of aromatic amines (AAs) present in anaerobically pretreated textile wastewater containing different types of dyes including azo dyes. Color and COD reduction was also monitored at the optimized conditions. The production of AAs was measured spectrophotometrically in the form of total aromatic amines (TAAs) and also verified with high performance liquid chromatography (HPLC) selectively. A composite coagulant, magnesium chloride (MC) aided with aluminium chlorohydrate (ACH) in an equal ratio (MC + ACH) was utilized during the coagulation process, which yielded 31% of TAAs removal along with 85% of color and 52% of COD reduction. At optimized power (200 W) and sonication time (5 h), an appreciable TAAs degradation efficiency (85%) was observed along with 51% color reduction and 62% COD removal using ultrasonication. The chromatographic data indicate that sulphanilic acid and benzidine types of aromatic amines were produced after the reductive cleavage of utilized textile dyes, which were effectively mineralized after ultrasonication. The degradation followed the first order kinetics with a correlation coefficient ($R^2$) of 0.89 and a first-order kinetic constant (k) of $0.0073min^{-1}$.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.345-350
• /
• 2006

본 연구에서는 생물학적 처리방법으로 염색폐수의 난분해성 유기물질을 효과적으로 처리하기 위한 방안으로 활성슬러지를 Polyethylene glycol(PEG)에 포괄고정화한 담체를 유동상 반응기를 이용하여 난분해성 유기물질의 처리효율을 평가하고 적정 운전인자를 검토하였다. 담체는 내경 4 mm${\times}$높이 4 mm의 원통형으로 미세공극을 가진 PEG재질의 담체를 제조하기 위해 PEG-prepolymer와 미생물을 젤 상태에서 혼합하여 고형화 시켰으며, 이때 담체에 사용된 미생물은 염색폐수에 순응시키지 않은 상태에서 합성되었다. 연속 호기성 유동상 반응기의 유입수는 $SCOD_{Cr}$ 약 330 mg/L, $SBOD_5$ 20 mg/L 이하의 생물학적 처리수를 사용하였고, 체류시간의 변화에 따른 각 반응기의 난분해성 유기물질 제거효율을 비교하였다 생물학적 처리수를 유입수로 하여 동일한 HRT로 운전한 결과 모든 조건에서 45% 이상의 유기물 제거효율을 보였으며, HRT 12 hr이 유기물 제거효율 등을 고려할 때 안정된 효율을 얻을 수 있는 적정 체류시간으로 판단되었다. 특히 기질환경의 변화에 따른 유기물 제거효율의 변화를 확인하기 위하여 생물학적 처리전의 처리장 유입폐수를 처리한 결과 $SCOD_{Cr}$ 70% 이상, $SBOD_5$ 97% 이상의 높은 처리효과를 나타내었다. 포괄고정화 담체를 이용한 염색폐수처리에서 유동상 반응기는 기존 활성슬러지 공정을 대신하거나 혼용하여 적용하는 것이 가능할 것으로 판단되어진다.

• 유기물자원화
• /
• 제12권3호
• /
• pp.134-139
• /
• 2004

피혁 제조 공정별 발생 폐수중 T-N 농도를 증가시키는 오염원이 가장 많이 배출되는 공정중 하나인 탈회공정에 적용 가능한 Non-phosgene화합물을 이용하여 Carbonate계 비질소계 탈회제의 합성 및 적용공정 연구를 통하여 배출 배액에서의 T-N, BOD, COD, SS의 측정결과 탈회후 혁에서의 Ca함량, Cr함량, TS를 측정하여 탈회효율 및 크롬 탄닝혁의 물리적 특성에 미치는 영향과 배출 배액에서의 T-N, BOD, COD, SS의 농도감소효과를 확인하여 친환경 피혁제조공정 확립을 위한 기초 연구를 진행하였다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2001년도 가을 학술발표회 발표논문집
• /
• pp.97-98
• /
• 2001

Acid Orange 7과 Methyl Orange의 경우, UV 빛을 조사하고 $TiO_2$ powder를 투여하였을 때 120분 이내에 탈색이 완전히 이루어짐으로써 색도를 80% 이상 제거할 수 있었다. 광촉매량이 증가할수록 촉매표면적이 증가하여 광반응 속도의 증가를 가져오나, 과도한 촉매량의 투입은 오히려 UV 빛의 효과적인 투과를 방해함으로써 광반응 속도를 감소시킨 것으로 사료된다. 초기 pH는 반응 속도에 큰 영향을 미치지 못하는 것으로 나타났으며, Orange II는 Methyl Orange보다 초기 pH에 다소 큰 영향을 받았다. 초기 농도가 낮을수록 초기 반응 속도는 증가하여 염료 분해 속도가 빠름을 알 수 있었다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.82-83
• /
• 2001

Selected microbes was applied to the treatment of textile wastewater with support particles. To enhance the treatment efficiency, biological treatment was achieved as first process. Wastewater with a COD of 870 ppm and color of 1340 PtCo unit was continuously treated in a 1.8 ton capacity reactor. In the case of combined processes, the effluent COD concentration and color were 40 ppm (95.4% reduction) and 20 PtCo unit (98.5% reduction).