• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.778-784
• /
• 2004

The natural dyeing of silk fabric with natural gardenia blue powder was investigated. The sum of K/S values was increased with increasing the amount of gardenia powder up to 20%,(o.w.b.). The proper time, temperature and pH for the dyeing of silk fabric with gardenia blue powder were 60~80 minutes, $80^{\circ}C$ and pH 4, respectively. The B and BG colors were obtained according to various mordanting methods, mordants and mordant concentrations. The various colorfastness were not improved by mordanting. The colorfastness to light was poor, but the colorfastness to dry cleaning and washing were good.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.183-191
• /
• 2000

The dyeing of silk fabric with chinese scholar tree extract was investigated. The colorant was extracted with distilled water, and concentrated under reduced pressure, and, finally spray-dried. The optimum temperature and dyeing time for the dyeing of silk with the scholar tree extract was $60^\circ{C}$ and 60 minutes respectively. In mordant dyeing, pre-mordanting method was most effective for color yield, and 1~2 % of mordant concentration was acceptable. Fastness of the dyed silk fabric to laundering and rubbing was shown to be good, but fastness to light, dry cleaning, and perspiration were varied with used mordants.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.97-97
• /
• 2012

비스코스 레이온 소재는 목재 펄프를 원료로 한 재생섬유로서 Drape성과 반발성은 탁월하나, 습식 방사에 따른 분자 구조적 불안정성으로 소비자가 일반 세탁 시 수축발생으로 종종 Dry Cleaning을 해야 하는 문제점들이 있음. 본 연구에서는 이와 같은 레이온의 단점을 극복하고 신축성 발현 및 형태안정성을 부여하기 위해 Rayon DTY사와 Spun T/R 40's를 개발하고 다양한 조직의 환편물을 제작하였으며, 기존의 레이온 제품 대비 수축률 등 형태안정성과 신축특성이 발현될 수 있는 염색가공 공정 조건을 설정하였음. 먼저 전처리시 균일하고 안정적인 수축이 발생하도록 하여 최종 생산품의 형태안정성과 신축성이 유지 될 수 있는 최적의 조건을 설정하였음. 전처리는 저온 축소 후 고온에서 정련하는 공정이 환편물의 조직에 관계없이 우수하였으며, 비교적 견뢰도가 우수하다고 판단되는 시판 분산염료 및 반응성염료를 사용하여 Polyester/Rayon의 2욕 2단 염색을 진행하였음. 또한 시제품의 품위를 높이기 위해 레이온 섬유의 고유한 특성을 부여할 수 있는 유연처방을 사용하여 총 13종의 환편물을 개발할 수 있었으며, 이렇게 개발된 원단은 형태안정성 -2.5~1.0%, 신장회복률 83% 이상, 필링성 4-5급의 결과를 나타내었음.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.808-814
• /
• 2013

In this study, The mixture of three kinds of pre-treatment agents, Carboxymethyl cellulose sodium salt(CMC), Sodium alginate and Dextrin, have been prepared for the better coloration of digital textile printing. To get sharpness of outline during digital printing process, the optimal formulation is the CMC and Sodium alginate mixture 1:1 ratio by volume. Cyan, Yellow, and Black colours are excellent on the Sodium alginate mixtures. But, Magenta is excellent in the CMC and Dextrin mixture. Sharpness and printability are closely related to viscosity of the mixture. The most optimal sharpness of outline achieved with a consideration of coloring, and field operations account for production when the viscosity of the mixed pre-treatment agent approximately is 10~13 cSt. Change in shade and staining of wash fastness for all the treated samples with the mixtures rated 4-5 grade. Both dry rubbing fastness to shade change and staining are good in the treated samples, whereas wet rubbing fastness rated 2-3 grade. To improve wet rubbing fastness, the Sodium alginate and Dextrine mixture, which rated 3-4 grade for Black color, is applicable. With exception of 3 rating to black color, Light fastness is 4 rating for the remaining three colors in the regardless of treatment condition and mixing of the pre-treatment agent. Dry cleaning fastness of all samples are also 4-5 rating.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.353-359
• /
• 2018

In this study, fused deposition modellig(FDM) 3D printing technology has been applied directly to polyester voil fabric to produce 3D printed lace/voil composite fabrics. A stereolithograpy(STL) file with a lace type 3D modelling under the various thickness were prepared and transformed into a g-code file using a g-code generator. The extrusion conditions for FDM 3D printing were controlled by 50mm/s of nozzle speed, $235^{\circ}C$ of nozzle temperature, $40^{\circ}C$ of heating bed temperature. 3D printed lace/voil composite fabriscs manufactured by 3D printing based on FDM using a thermoplactic polyurethane(TPU) filaments were obtained. To evaluate the mechanical properties and washability of the fabricated 3D printed lace/voil composite fabric, KES-FB system test, washing fastness test and dry cleaning resistance test were conducted. As 3D printing thickness increased, KOSHI, NUMERI, and FUKURAMI of 3D printed lace/voil composite fabric increased. From the results of the primary hand value test, 3D printed lace/voil composite fabrics were confirmed to be applicable to women's summer garments. As a result of the washability and dry cleaning resistance test of the 3D printed lace/voil composite fabrics, all samples were graded 4-5.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.138-146
• /
• 2013

Chemical compositions and biological functions of brown colorants extracted from pine bark(Pinus densiflora) have been studied. Dyeing test using multifiber fabrics with extracted colorants were preliminary carried out. Dyeing conditions and fastness tests of selected fabrics have been also studied. The brown colorants were produced 1.5% concentrations by solvent extraction from milled pine bark using methanol. The colorants were extracted with 80% methanol as best choice by a criteria of solid quantity and dyeability on fabrics. The chemical compositions were identified as mixtures of taxifolin epicatechin and procyanidin by LC/MS analysis. The brown colorants could be dyed not only natural fibers such as cotton, silk and wool but also synthetic fiber as nylon and semi-synthetic fiber as viscose rayon. Maximum K/S values was shown at 400 nm according to different fiber with color appearance of redish brown. Optimum pH and temperature of dyeing conditions was 4 and above $80^{\circ}C$, respectively. The brown colorants had a strong antioxidant activity compared to Butylated hydroxyanisole as standard and weak antimicrobial activity against E. coli. compared to kanamycin. Washing, rubbing, perspiration, dry cleaning and light fastness for cotton, nylon and silk dyed with the brown colorants were carried out by KS K method. Most of color fastness such as washing, rubbing, perspiration, and dry cleaning were represented as 4-5 grade. However, light fastness was reported as 2-3 grade. From this studies, brown colorants produced pine bark have a high potentials for natural dyeing on fabrics with antioxidant activity.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.263-268
• /
• 2011

One-step reduction/dyeing method was applied for ramie dyeing with natural indigo powder. The effect of reduction/dyeing conditions including the pH of bath, dye temperature and time, and concentration of indigo powder and reduction agent on dye uptake and color properties were investigated. Regardless of addition of alkali, the dyed fabrics appeared in the PB Munsell color range(${\lambda}_{max}$: 660 nm) and the dye uptake was much higher with no addition of sodium hydroxide. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at 60 for 30min. Saturated dye uptake was obtained at 2 g/L of sodium hydrosulfite concentration up to 2 g/ L of indigo powder. Whereas, at higher indigo powder concentration (4 g/L), more than 3 g/L of reducing agent concentration was required for obtaining the saturated dye uptake. Color reproducibility was reliable with color difference in the range of 0.03~0.16. Regardless of color strength, fastness to rubbing was acceptable with a 3/4~4/5. Fastness to washing, dry cleaning, and light of samples with low color strength were poor. Whereas, fastness to washing, dry cleaning, and light of samples with high color strength were very good.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.79-85
• /
• 2002

To develope natural dyeing materials from the unused plant materials, we had several dyeing experiments to investigate the optimum conditions of dyeing fabrics with the waste grape juice. Dyeing experiments were done under different dyeing conditions of dyeing time, dyeing temperature, pH and concentration of dyebath and mordants which were treated after dyeing. Experimental fabrics were silk, cotton, ramie and hemp. Color difference(${\Delta}E$) and Munsell's HV/C of the dyed fabrics and color fastness of silk dyed fabrics to dry cleaning, washing, rubbing, perspiration and light were measured. The color differences of dyed experimental fabrics were very slightly increased with dyeing time and the color of dyed silk was light purple and the cotton, ramie and hemp was light red purple. The color differences of dyed experimental fabrics were decreased and the color became lighter with dyeing temperature increased. The color differences of dyed experimental fabrics were decreased and the color changed from light purple to blue with the pH of dyebath increased. The color differences of dyed experimental fabrics were slightly increased with the concentration of dyebath increased. The color of dyed fabric changed with the mordant treatment and were different among the experimental fabrics. On the whole, blue tone increased with the Al and Fe mordant and green tone increased with the Cu mordant. The color fastness of dyed silk fabrics to light, washing (change) and perspiration (change) was bad and color fastness to dry cleaning and rubbing were good.

• Textile Coloration and Finishing
• /
• v.23 no.4
• /
• pp.263-273
• /
• 2011

Digital textile printing(DTP) technology made considerable advances in recent years. In this study, a pre-treatment agent has been prepared for the better coloration of digital textile printing. The ink formulation contained three kinds of 5g thickener (CMC, Sodium alginate, Dextrin), 25g urea, 5g sodium carbonate, and 465g distilled water. The optimal sharpness of outline was found in the 1-3% concentration of the pre-treating agent with a viscosity of 10-15 cSt. Even if the color difference between untreated and treated samples was not apparent in the printing step, the color appearance increased after steaming. The color appearance of cyan, magenta, yellow, black reactive colorants increased in the order of CMC>Sodium alginate>Dextrin. Wash fastness to shade change and staining for the treated samples were 4-5 rating, while untreated sample was 1-2 rating. Also, the pre-treated sample with 1:1 mixtures had 4-5 rating. Both dry and wet rubbing fastness to shade change and staining were excellent in the treated samples, whereas rubbing fastness of untreated sample was 1-2 rating. With exception of 3 rating to black color, light fastness properties were 4 rating for the remaining three colors in the regardless of treatment condition and mixing of pre-treating agents. Dry cleaning fastness of all samples were also 4-5 rating irrespective of treatment condition and mixing of pre-treating agents.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.331-338
• /
• 2000

To study on the actual condition of care label attached to clothing and consumers' perception, 250 summer clothes sold at department store-blouse, trousers, one-piece dress, knit cardigan and skirt-were investigated during July 2000. In addition, a questionnaire was administered to 192 women in Taegu during August. The fiber contents of surveyed clothes were polyester 100% & polyester blend (26%), rayon 100% & rayon blend (18%), cotton 100% & cotton blend (17%), wool 100% & wool blend (14%) and others. All clothes surveyed were attached care label and the signals showed on care labels were 4~6 kinds about cleaning, squeezing, drying, bleaching, and ironing methods. 92% of clothes had to be dry-cleaned and only 8% could be wet-cleaned. Considered the surveyed clothes were for summer which needs frequent washing and the clothing items, the number of clothes had to dry-cleaned were too many. The bleaching instructions were no chlorine bleach (74%), no bleaching (21%) and others. The ironing instructions were cool ironing ($80{\sim}120^{\circ}C$) with cover (24%) and warm ironing ($140{\sim}160^{\circ}C$) with cover (69%) primarily. The drying instructions was dry on a hanger in the shade (54%) and 38% had no signal or incorrect signal. The properties of summer clothes considered important by consumers were wrinkled hardly, hand-washable, machine-washable, needed no iron and etc. Actually most of summer clothes were hand or machine-washed. Also, the majority of respondents felt inconvenient to have to dry-clean summer clothes. More than 80% respondents looked over care label and fiber content label before buying clothes. However most of respondents did not followed that instructions exactly and thought care label instructions were not correct. Considered this results, the suppliers have to make efforts to attach correct and appropriate care label which furnish the correct information to consumers.