• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.312-318
• /
• 2014

This study examined the correlation between a handle evaluation of cosmetic puff textile and a sensory evaluation. The KES-F system was used to analyze the main mechanical factors for the handle evaluation and a statistical method was used for the sensory evaluation. The results revealed different mechanical properties and handle values of the tested cosmetic puff textiles. A material type and structure of the cosmetic textile affected the handle property of the material which is the most important factor for a cosmetic purpose. Particularly, the physical properties of textile material are likely to be important factors for the sensory property of cosmetic material. In addition, the sensory evaluation also revealed different sensory characteristics of the cosmetic efficiency according to the cosmetic puff textile. No close relationship was observed between the mechanical properties and sensory evaluation on the cosmetic puff textiles. The sensory evaluation of a cosmetic efficiency is not only decided by the physical and mechanical characteristics of the cosmetic textile material. Overall, when using textiles used for the cosmetic purposes, it is important to consider not only the proper mechanical properties of the textiles but also the use and sensory satisfaction. Development and selection of the cosmetic textiles should be focused on both the material function and consumer satisfaction.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.37-44
• /
• 2007

In this study, for textile use, the octadecane of phase change materials(PCM) was encapsulated in several micro-diameter shell which prevents leakage of the material during its liquid phase. Microencapsulated PCM(PM) was prepared with the different weight ratio of core material to wall material and by interfacial polymerization methods using polyurea as shell material. Phase stability for O/W emulsion of PCM and PVA aq. (PE) was evaluated by Turbiscan Lab. The capsule formation win identified using FT-IR. Physical properties of microcapsules including diameter, particle distribution, morphology were investigated. Thermal transport properties of suede treated with PM(SPM) were determined by KES-F7 system.

• 폴리머
• /
• 제38권4호
• /
• pp.477-483
• /
• 2014

Poly(lactic acid) (PLA) and poly(${\varepsilon}$-caprolactone) (PCL) blends with various components for melt-blown non-wovens were prepared by a twin-screw extruder. Tributyl citrate (TBC) was added in order to improve the miscibility between PLA and PCL. The results showed that small circular particles of PCL were dispersed in PLA matrix uniformly. The addition of PCL had the heterogeneous nucleation effect on the crystallization of PLA and decreased thermal stability of PLA. The flow of pure PLA and blends approached to Newtonian liquid at a low shear rate and expressed more obvious viscoelasticity at a high shear rate.

• 한국농촌생활과학회지
• /
• 제6권1호
• /
• pp.11-24
• /
• 1995

The new textile materials may be defined as textile materials different from already existing ones in the physical and chemical structure, manufacturing process, or end-use property. The present time what is called the post-industrial society is characterized by rapid change and new technology. Also, textile materials have been changed rapidly and diversely in the post-industrial society than in any other periods. The study aimed to analyze the trend of new tektite materials development in Korea and to forecast the development trend in the future. To investigate the trend of new textile materials, various written materials and informations were collected from the manufacturers, textile related periodicals, and research journals, and they were analyzed. The period of analysis was from January 1992 to May 1995. The results of this research are as followings : (1) Mixed textile materiasl such as bicomponent fiber, blended yam and blended fabric were increased. (2) High technology has an important effect upon new textile material development. (3) functional textile materials were increased (4) The high value-added products were increased. (5) The naturalized textile materials were increased.

• 한국의류산업학회지
• /
• 제18권2호
• /
• pp.184-193
• /
• 2016

This study investigates the recognition and preference of functional textile material about outdoor clothing widely used in the current fashion market. The study targeted 216 males and females in their 20s to 50s who wear outdoor clothing as casual wear. To analyze data, frequency analysis, cross tabulation analysis and ANOVA were conducted with the SPSS 21.0 statistical package. The results are as follows. First, recognition of functional textile material of outdoor clothing showed that 20s was the lowest preference and all age groups preferred lightweight textile material. In information recognition of functional outdoor clothing, 40s showed the highest recognition, while 20s showed the lowest recognition. Second, 40s and 50s preferred functional material to 20s and 30s. In particular, 40s and 50s preferred clothing items with water vapor permeability & water repellent material to 20s and 30s. All age groups preferred insulation material jumpers, water vapor permeability & water repellent material jumpers and stretch pants. Third, reasons for purchasing functional material clothing was: design for the age group 20s and 30s versus health and function for the age group 40s and 50s. It is necessary to develop functional clothing products based on exact consumer information and preferences.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.199-207
• /
• 2018

In this study, the properties of polypropylene(PP) non-woven fabric spun under various conditions by the Melt-blown method were verified, and the deodorant content and deodorization of PP non-woven fabric after deodorant-treatment were investigated. PP non-woven fabrics are manufactured by varying the temperature of spin beam, hot air temperature and amount, the RPM of collector R/O and the distance between collector and spinneret, which affects the structure of the non-woven fabric. After that, the structural characteristics and air permeability of the non-woven fabric were measured. The experimental results show that the amount of air, the distance between the collector and the spinneret significantly affect the structural characteristics and air permeability of the PP non-woven fabric. And, regardless of the weight of the PP non-woven fabric, the deodorizing effect of UiO-66 MOF deodorant add-on ratio and content was higher.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.29-41
• /
• 2023

This study is about a hybrid lightweight cowl crossbeam structure with high rigidity and ability to absorb collision energy to support the cockpit module, which is an automobile interior part, and to absorb energy during a collision. It is a manufacturing process in which composite material bracket parts are inserted and injected into existing steel bars. When considering the mounting condition of a vehicle, the optimization of the fastening condition of the two parts and the mechanical properties of the composite material is acting as an important factor. Therefore, this study is about a composite material having a volume content of Polyamide(PA) and Glass Fiber used as a composite material for a composite material-metal hybrid cowl crossbeam. As a result of analyzing the physical properties of the PA/GF composite material, experimental data were obtained that can further enhance tensile strength and flexural strength by using PA66 rather than PA6 used as a base material for the composite material. And based on this, it contributed to securing the advantage of lightening by using high-stiffness composite material by improving the high disadvantage of the weight of the cowl crossbeam material, which was made only of existing metal materials.

• 패션비즈니스
• /
• 제21권3호
• /
• pp.14-28
• /
• 2017

This purpose of this study to analyze effect material properties have on change in QR code recognition rate according to change of materials by comparing recognition rate of color QR code. QR code applied to textile materials has the advantage of being washable and being applicable to lost child prevention goods or clothes or a person with dementia through record of information relating to the material or input of additional information, differently from QR code printed on the conventional paper. An effective method of entering QR code in textile materials is Digital Textile Printing(DTP), that facilitates printing by rapidly applying diverse information, and small quantity production. It is possible to tailor various QR codes according to use. Regarding samples to use, cotton material used in clothing products and Tyvek material recently applied to clothing and related products were selected. Reactive dyes were used for cotton, pigment was used for Tyvek, and QR code was printed with an inkjet printer by direct printing method. Printing methods and surface textures are different between cotton and Tyvek. It was revealed that consequent print results and results of recognition rate were different. Regarding color to be printed, 2015 S/S - 2017 S/S color presented by Pantone was used. Color combination affected recognition rate of color QR code. Understanding color combination, material properties and print characteristics may be helpful in increasing recognition rate of color QR code, and may contribute to usability of color QR code applied to textile materials in the future.

• The International Journal of Costume Culture
• /
• 제7권1호
• /
• pp.28-39
• /
• 2004

The Korean textile industry the driving force of Korea's economic development, is faced with difficulties due to domestic and foreign influences. The purpose of this paper is to examine what measures are necessary for overcoming such difficulties. As the first step, We conducted a month-long survey, in August 2003, of 157 small-medium firms operating in the Korean textile industry to collect information about difficulties that they face in carrying out their business. According to the result, small firms performed badly in sales and facility investment efforts for 2003 due to worldwide economic depression. They, however, actively pursued new technology development in order to improve their competitiveness. Profits and productivity decreased with reduced sales, and their view on the next year’s perspective is also very unfavorable. Especially many firms intend to maintain or even lower the level of sales goal for 2004, reflecting the sluggish market environment. According to the survey, under such circumstances, as many as 74% of firms wanted to turn the tables through the development of highly sensuous material and improved marketing efforts. One of potential answers to this problem, which is suggested by the survey, is to establish a consulting service institution to provide promptly marketing data and information on textile and fashion market and trend in Italy. Especially, firms surveyed have shown a great deal of interest in Italian consulting service for new textile material developments. While they want the service for high value-added product development, they are reluctant to do so because of the uncertainty of its future effects and high consulting fees.

• 한국의류산업학회지
• /
• 제15권6호
• /
• pp.899-911
• /
• 2013

This study investigated the current curricula for the training of textile design specialists. In-depth interviews were conducted with 6 practitioners working in the textile design industry; subsequently, the curricula offered by 20 textile design-related departments at 4-year and 2-year colleges in Korea were used for the data analysis. The results of this study were: First, the problems of textile design education were (1) a limited understanding of commercial designs, (2) an education system concentrated on pattern designs, (3) limited creativity and design expression capacity, (4) limited practical ability and the analysis of collection. Second, most textile design departments at Korean colleges were located in the Seoul/Gyeonggi district and Gyeongbuk/Gyeongnam district. Third, textile material and imagination/expression subjects were a limited part of the curricula; subsequently, a long-term and systematic education system (by college year) was required for the use of basic education subjects. Fourth, there was a shortage of practical subjects in college education despite the perception of commercial designs; in addition, a professional design education (by material and use) were an important part of practical business.