• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.1030-1038
• /
• 2015

The purpose of this study is to investigate the dyeability of crabyon fiber contained cotton towels after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at 60℃ and 60min. Crabyon, composite fiber of Chitin/Chitosan and cellulose, is manufactured by uniformly blending Chitin/Chitosan and cellulose viscose and extruding the blended viscose into spin-bath. Cotton towels with crabyon fiber dyed with extracted solution from gallnut according to concentration, temperature and time. Crabyon fiber contained cotton towels dyed using gallnut were pre of post-mordanted using Al, Cu, and Fe. The dyeability(K/S) and color characteristics(L^*, a^*, b^*, C, and h(color angle)) of dyed crabyon fiber contained cotton towels were measured by computer color matching machine and photographs. The crabyon fiber composition of cotton towels was conformed by amide peak(-CONH-) of chitin or chitosan of FT-IR spectroscopy. The results obtained were as follows; The amide peak of crabyon fiber contained cotton towels appeared at about 1652 cm⁻¹. The dyeability of crabyon fiber contained cotton towel was increased gradually with increasing concentration of gallnut dyeing solution and saturated at about 150%(o.w.f). The optimum dyeing temperature and dyeing time were 90~100℃ and 80minutes expectively. The crabyon fiber contained cotton towels were dyed reddish yellow by non, Al, and Cu mordanting, reddish blue by Fe mordanting, respectively. The fastness to washing according to concentration of gallnut in and mordanting method indicated good grade result as more than 3~4 degree in all conditions.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.492-500
• /
• 2012

Cocoa is a popular drink for children and contains healthy polyphenols however; a deep brown stain is left when cocoa is spilled over clothes. The main pigments in cocoa are anthocyanins that change in washing solutions with different alkalinity and metals. The removal and color changes in a cocoa stain after washing with various pH solutions and water hardness were studied. Alkalinity and the water hardness of washing solutions were important factors for the removal of cocoa stains. The removal of cocoa things in washing solutions without detergent was low (and even became negative after removal and darker) in solutions with a pH 9 and above. The cocoa stain was not removed and only the fabric color faded, although the cocoa stained cloth was washed with Korea tap water that has a pH of 7. The cocoa stain removal in detergent solutions was conspicuously higher than for only water. Even in detergent solutions, the cocoa stain removal decreased as water hardness increased. Cocoa stain removal was more effective and the color dimmest when the stained cloth was washed in a solution without the metal cations, and the bleach added with the detergent at a temperature of $40^{\circ}C$ and for longer than 20 minutes. Effective and economical equipment for tap water softening for a washing machine should be developed and used to improve cocoa stain removal.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.114-121
• /
• 2010

Denim is one of the most frequently used fabrics for blue jeans. After washing denim fabric frequently changes its size and color. Salespersons recommended that after purchasing blue jeans customers should dry clean them once before washing. The aim of this study was to investigate to what degree washing with a household washing machine and dry cleaning affected the dimensions and the color of denim fabric. The denim fabric shrank greatly after the first laundering in warp direction regardless of whether it had been dry-cleaned or not. However, it shrank little from the second to the tenth laundering and after each number of dry cleanings. The thickness of the denim changed in the same way as the shrinkage occurred when the number of launderings or dry-cleanings increased. Although the indigo came out of the denim into washing liquor, both of the $L^*$ values and the $b^*$ values of the laundered and the dry-cleaned denim fabrics were lower than those of the control fabric. Darkening of the fabric after washing attributed to the shrinkage in warp; specifically the deep-blue warp yarns more spaced on the fabric face and the back. The $L^*$ and $b^*$ values of the dry-cleaned fabric decreased less than those of the laundered. The value of $a^*$ increased much less than the other values. Staining of the white cotton fabric laundered with the denim fabrics became less as the number of launderings increased. The degree of staining from the dry-cleaned denim was much lower than that of the laundered fabric.

• 한국의류학회지
• /
• 제45권4호
• /
• pp.573-585
• /
• 2021

This paper describes the processes conducted in the analysis and conservation of suit worn by Yu Rim (1898-1961). The suit consists of a jacket and pants and is a typical Mao-style suit for independence activists; it is notable in that it was made of domestic wool. Inside the jacket, there is a machine embroidery of the name "Danju," a label of synthetic resin which reads "Daegu citizen's tailor's shop," and buttons engraved with "PUSAN SIN-HUNG." According to our textile analysis, the outer layer is composed of worsted wool while the lining is made from acetate. Damage to the garment from malodor and insects has been repaired, and the suit has been restored to its original shape by a conservation treatment that has reinforced the textiles. This conservation case can provide valuable research data on the preservation of modern and contemporary clothing. In addition, this study also attempts to estimate the date of suit worn by Yu Rim's production by comparing it with woolen suits produced around the same time and examining the clues associated with the relics. This is significant since it enhances the value of the cultural assets and provides detailed information on the historical transformation of domestic suits.

• 한국의류산업학회지
• /
• 제23권3호
• /
• pp.337-346
• /
• 2021

In the fourth industrial revolution, fashion students are expected to work with various technologies to show creativity. This study aimed to conduct project-based learning(PBL) in collaboration with industry experts to design and operate artificial intelligence(AI) in the practice subject of fashion curation through the industrial academic teaching method. We first looked at teaching methods and strategies incorporating PBL in various academic fields. Next, we analyzed fashion projects and fashion curation services applying AI. Then through the question-and-answer method and by consulting with industry experts, we developed a curriculum for AI fashion curation, applying PBL(fashion market and trend analysis; new styles and time, place, and occasion planning; AI machine learning data set production; curation model development; and evaluation) suitable for the university's educational environment, information technology company conditions, and fashion students. As part of a close cooperation system with the industry, we conducted a 15-week Fashion Project II (Capstone Design) course and evaluated the outcomes and student satisfaction with the course. Students were able to develop new style, and time, place, and occasion categories and to utilize strategies for AI fashion curation services reflecting the unique needs of Millennials and Generation Z. Students showed high satisfaction with the curriculum. Further, it was confirmed that the study successfully applied PBL in class using AI technology in fashion education.

• 한국의류산업학회지
• /
• 제23권1호
• /
• pp.98-105
• /
• 2021

This study investigates and analyzes user preferences for golf wear with a sense of wear and smart function for the development of smart golf wear based on user convenience. A survey was conducted on 124 males in the age range of 40-60s that consisted of professional golfers, amateur golfers and the public with golf experience (such as major golf consumers) from August 1 to August 30, 2019 (IRB NO. 1040198-190617-HR-057-03); consequently, a 117 copies were accepted for analysis. The findings are as follows. The elbow (4.3%) of golf wear is unsatisfactory. The important part of the golf swing motion is the shoulder (39.3)>, elbow (30.8%)>, and wrist (6.8%). In addition, the unsatisfactory wearing of golf wear due to golf swing movements indicated that the shoulder or elbow area was pulled or the bottom of the top was raised during the back swing movements. The survey results on the expected discomfort when wearing smart wear are 'discomfort of obstruction when wearing' (53.8%), 'discomfort of washing' (17.1%), and 'weight of attached machine' (13.7%). Opinions such as 'Will not feel good when the sensor is attached' were investigated. The examination of the preference for golf wear equipped with smart functions indicated that a posture correction function to correct the golf swing posture is the most desired quality that is also considered important when correcting posture.

• 한국의류산업학회지
• /
• 제24권5호
• /
• pp.647-654
• /
• 2022

Wearable devices come in a variety of shapes and sizes in numerous fields in numerous fields and are available in various forms. They can be integrated into clothing, gloves, hats, glasses, and bags and used in healthcare, the medical field, and machine interfaces. These devices keep track individuals' biological and behavioral data to help with health communication and are often used for injury prevention. Those with hearing loss or impaired vision find it more difficult to recognize an approaching person or object; these sensing devices are particularly useful for such individuals, as they assist them with injury prevention by alerting them to the presence of people or objects in their immediate vicinity. Despite these obvious preventive benefits to developing Internet of Things based devices for the disabled, the development of these devices has been sluggish thus far. In particular, when compared with people without disabilities, people with hearing impairment have a much higher probability of averting danger when they are able to notice it in advance. However, research and development remain severely underfunded. In this study, we incorporated a wearable detection system, which uses an infrared proximity sensor, into a backpack. This system helps its users recognize when someone is approaching from behind through visual and tactile notification, even if they have difficulty hearing or seeing the objects in their surroundings. Furthermore, this backpack could help prevent accidents for all users, particularly those with visual or hearing impairments.

• 복식문화연구
• /
• 제32권1호
• /
• pp.70-85
• /
• 2024

This study aimed to examine the recent Hanbok school uniform design directions to contribute to the distribution of Hanbok school uniforms and the accumulation of Hanbok-inspired fashion design sources. We reviewed 16 academic papers published on Hanbok school uniform designs from 1998 to 2023 and summarized the design features proposed therein. We also analyzed 172 items of Hanbok school uniform designs developed under the Hanbok school uniform promotion project hosted by the Hanbok Advancement Center between 2019 and 2022. We found that the recent Hanbok school uniform design characteristics conformed to the design directions proposed in previous studies in terms of line, color, fabric, and textile pattern. Conforming design characteristics include the following. Overall, silhouettes were straight and moderately fitting to the body. Detailed straight and curved lines from Hanbok were applied. Designs showed traditional Hanbok colors, including white, black, and navy. Machine washable cotton and various blended fabrics were used. Modernized traditional patterns such as Saekdong, cloud, and Gwae were applied to textile designs. In contrast, some characteristics of recent designs deviated from the proposed design directions. Barrel silhouettes were found in casual styles of uniform items, including sweatshirts, hoodies, and jumpers. A wider range of materials, including fleece, quilted fabric, brocade, and Jinju silk, were used. Uniforms had looser silhouettes and were made with modern washable materials to meet students' preference for casual uniforms.

• 월간산업보건
• /
• 통권8호
• /
• pp.4-30
• /
• 1988

Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.

• 감성과학
• /
• 제24권2호
• /
• pp.65-74
• /
• 2021

최근 ICT 산업의 기술혁신이 일어남에 따라 생체신호을 인식하고 이에 대해 대응을 하기 위한 웨어러블 센싱 장치에 대한 수요가 증가하고 있다. 이에 따라 본 연구에서는 단순한 함침과정을 통해 3차원 스페이서(3D spacer)직물을 단일벽 탄소나노튜브(SWCNT)분산용액에 함침공정을 진행해 단일층(monolayer) 압전 저항형 압력 센서(piezoresistive pressure sensor)를 개발하였다. 3D 스페이서 원단에 전기전도성을 부여하기 위해 시료를 SWCNT 분산용액에 함침공정을 진행한 후 건조하는 과정을 거쳤다. 함침된 시료의 전기적 특성을 파악하기 위해 UTM (Universal Testing Machine)과 멀티미터를 이용해서 압력의 변화에 따른 저항의 변화를 측정하였다. 또한 센서의 전기적 특성의 변화를 관찰하기 위해 분산용액의 농도, 함침횟수, 시료의 두께를 다르게 해서 시료의 센서로서의 성능을 평가했다. 그 결과 wt0.1%의 SWCNT 분산용액에 함침공정을 2번 진행한 시료가 센서로서 가장 뛰어난 성능을 나타냄을 알 수 있었다. 두께별로는 7mm 두께의 센서가 가장 높은 GF를 보이고 13mm 두께의 센서가 작동범위가 가장 넓음을 확인했다. 본 연구를 통해 3D spacer 원단으로 제작한 스마트 텍스타일 센서는 공정과정이 단순하면서도 센서로서 성능이 뛰어나다는 장점을 확인할 수 있었다.