• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.8-13
• /
• 2010

Needle contamination was investigated using a test rig simulated the knitting points in the knitting machine in relation with the characteristics of knitting yarn such as yarn type and moisture contents. When used open-end yarn compared with combed and carded ring-spun yarns, the needle contamination was significantly increased because of the higher friction between yarn and needle by the fly and other impurities. Also Lower moisture content of the yarns aggravated the needle contamination. In addition knitting yarn breakage was substantially influenced by the higher needle contamination.

• Journal of the KSME
• /
• v.35 no.1
• /
• pp.63-70
• /
• 1995

연사기는 섬유공정 중에서도 기본적인 제직 준비공정으로서 연사기 시장은 개발도상국의 섬유 산업 진흥과 더불어 날로 확대되고 있다. 최근 섬유산업이 요구하는 연사기의 성능은 범용성\ulcorner 효율성 및 다양한 보조기능(실잇기, 패키지교체, 왁스나 요일의 첨가 등의 기능을 자동화하는 것 등)의 구비 등이다. 연사기의 생산성은 스핀들의 회전수가 높을수록 증대되므로 고속회전체 기 술의 개발이 시급하며, 다양한 기능의 자동화에 대한 연구\ulcorner개발이 뒷받침되어야 한다. 현재 우 리나라 연사기 기술수준은 다른 섬유기계에 비해 선진국 수준에 가깝게 접근해 있다. 따라서 연사기는 우리 섬유기계 산업계와 기계공학인 여러분의 적극적인 관심과 노력이 모아진다면 비 교적 단시간 안에 선진국과 견줄 수 있는 분야라고 생각된다.

• Textile Coloration and Finishing
• /
• v.15 no.6
• /
• pp.33-38
• /
• 2003

This study surveys the effects of POY physical properties and processing conditions of belt texturing machine to the textured yarns. The various textured yarns are made with the variations of 1st heater temperature, draw ratio, velocity ratio, and the physical properties of these specimens such as yam linear density, tenacity, breaking strain, and wet and dry thermal shrinkages are measured and analysed with the various processing conditions of texturing machine. Especially, the thermal characteristics of the textured yarns, which are affected at the fabric hands and the determination of the processing conditions in the dyeing and finishing processes, are investigated through the thermal stress analyser and DSC experiments.

• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.47-54
• /
• 1996

In order to develop the air flow finishing machine with low tension drying and surface modification by high impact effect, the treatment characteristics and the moving speed of fabrics was analysed and investigated in the newly developed system. The change of handle before and after treatment of fabrics measured using Kawabata system. The moving speed in air nozzle was affected by an air pressure of blower, and the maximum value was 1,000 m/min. In accordance with the change of handle, the treatment effect was very different compared with untreated fabrics. And the drape properties of fabrics increased about 10∼45% compared with untreated one.

• Textile Coloration and Finishing
• /
• v.15 no.2
• /
• pp.93-101
• /
• 2003

To acquire dyeing ability on aramid(Nomex) spun yarn in supercritical fluid dyeing, supercritical fluid dying(SFD) machine of 3L scale was designed. C. I. Disperse Red 60 and Red 360 were used in this work. It was possible to increase dyeing ability and to get level dyeing of fiber by attaching assistance devices(controlling device of supercritical fluid, nozzle, cover of carrier, etc.) to SFD machine. Physical properties(tensile strength, elongation, shrinkage) of Nomex spun yam treated by SFD were not changed. K/S values of dyed Nomex spun yam with Red 360 were higher than that with Red 60 and color fastness of dyed Nomex spun yam by SFD was similar to that by conventional dyeing method.

• Textile Coloration and Finishing
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2000

In this study, the control system of sodium hydroxide was demonstrated to systemize hydrolysis process in polyester dyeing. We mainly focused on the application method of acid-alkali titration for the polyester hydrolysis machine of liquor-flow type. Industrial pH meter with electrode type was used for identifying equivalence point. Three units which were analogue-to-digital card, microprocessor and digital output card were used to control NaOH concentration in the control part of the system. The yielded data are translated to the microprocessor through analogue-digital interfacing card. After calculating, NaOH concentration in NaOH storage tank was controlled through the digital output card and solenoid valves.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.5-9
• /
• 2004

This research surveys the threadline instability on the belt texturing machine according to the 1st heater temperature, draw ratio and velocity ratio. the threadline instability to the time, which is called surging phenomena, is analysed with variations of draw ratio and velocity ratio. In addiction, the surging phenomena is investigated with the variation of the untwisting tension and false twist mechanism on the belt texturing machine. The breaking strain, modulus and yam unevenness of the DTY along the yarn length are measured and analysed with the surging phenomena which is due to untwisting tension variation on the threadline according to the draw ratio, 1st heater temperature and velocity ratio.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.117-136
• /
• 2014

The purpose of this study is to present a classification system of the hand-made and machine-made lace according to the configuration method and re-make the category and definition of lace to consider the emergence and development of major laces techniques. The re-made category and definition of the lace is as follows. The lace usually consists of ground and motifs, however, the techniques of netting and sprang are suitable for making ground than motif, so I think it is appropriate to exclude them from the category of the lace. Many scholars are excluded openwork embroidery fabric from the category of the lace. But, an openwork embroidery fabric is the basis of a needle point lace called true lace and is consist of motif and ground. I think it is appropriate to include it in the category of the lace. I think it is also appropriate to include in the category of the lace that the eyelet embroidery fabric which mimics the openwork embroidery fabric in the machine. Lace is redefined that a fabric with openwork decoration consists of motif and ground, constructed by a variety of ways such as plaiting, twisting, looping, knotting of threads or embroidering by hand or machine. The classification of the lace is presented as follows. Hand-made lace is classified bobbin lace, needle point lace, embroidery lace, knotted lace, crochet lace, and knitting lace. Machine-made lace is classified raschel lace, leaver lace, torchon lace, and machine-made embroidery laces which include tool lace, eyelet embroidery lace, chemical lace, etc.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.35-49
• /
• 2015

This paper investigated optimum process conditions of coating yarn for awning fabric. For this purpose, the simulation for processability and yarn quality using SPSS statistics package was carried out, and PP/TPO and PET/PVC coating yarns specimens were made with variation of extruder temperature and feed speed of core yarn on the yarn coating machine for examining simulation result. It was revealed that optimum coating conditions of PP/TPO 1000d coating yarn were extruder temperature $150^{\circ}C$, and core yarn feed speed 400~500m/min. Mechanical property and thermal shrinkage of PP/TPO coating yarn made at this conditions were best and core evenness rates of these coating yarns by yarn compression tester were also superior, which was certified by SEM photograph. In addition, these experimental results were coincided with simulation results. It was found that, in PET/PVC coating yarn, yarn physical properties between 1500d and 1200d coated yarns were not shown any difference, and core evenness rates of these coating yarns were superior. It revealed and concluded that these simulated coating conditions are applicable to production field.

• Journal of Korean Home Economics Education Association
• /
• v.7 no.2
• /
• pp.113-123
• /
• 1995

The purpose of this study is to investigate teachers’ recognition in Food/Nutrition, Textile/Clothing part in Home Economics Text Book of Middle School and to provide the basic data for the improvement of its curriculum. 147 Home Economics teachers in Taegu city and Kyungsangbukdo area responded to the questionnaire. The results are summarized as follows: 1. Most of Home Economics teachers have graduated Dept. of Home Economics Education and have ever taken teacher training. And even those who ever taken teacher training are not satisfied with training curriculum contents. Therefore, the result of this study shows that teacher training curriculum contents should be improved so as to be helpful for the actual teaching and learning. 2. In terms of the suitability of contents of food & nutrition and contents of textiles & clothing to the student’s learning development levels, the degree of suitability is in the order of nutrition & health, nutrition in adolescence, food selection, kinds and functions of nutrients in food & nutrition curriculum, and in the order of suitable clothing, mixture rate of fabrics, purchase of clothing, clothing in adolescence, clothing selection. The contents of making processed foods and usage of sewing machine of the existing text book have turned out not to be appropriate. 3. Most teachers suggest that dietary guideline for health, misconception about food & nutrition selection of ready-made suit suitable clothing for situation & character as well as the contents of the existing text book should be included in the new text book.