• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.485-496
• /
• 2020

Submerged structures such as low-crested breakwaters and artificial reefs have been commonly used for coastal protection. In this study, two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of permeable type submerged structures armored by Tetrapods. Different cases of the experimental conditions were included by relative crest depth, relative freeboard, relative crest width, wave steepness and so on. An empirical formula from the experimental data was proposed to predict the wave transmission coefficients over various specifications and structural designs of the permeable type submerged structure. The proposed formula successfully predicted the wave transmission coefficients. In this study, the proposed empirical formula of the wave transmission over the submerged structure was improved from the existing formula.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.497-507
• /
• 2020

Two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of rubble-mound type submerged structures armored with Tetrapods. Different experimental conditions were included by considering relative crest depth, relative freeboard, relative crest width, wave steepness, and so on. An empirical formula was proposed to predict the wave transmission coefficients over various specifications and structural designs of the partial perforated (rubble-mound) type submerged structure from the experimental results. The proposed formula successfully predicted the wave transmission coefficients. In this study, the proposed empirical formula of the wave transmission over the rubble-mound type submerged structure was improved from the existing formula.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.271-278
• /
• 1993

Sand ripple. the smallest bottom configuration, is one of the most important factors in the mechanism of sand transport. This paper deals with characteristics of ripple geometry generated by regular and irregular waves. Especially. rearrangement of ripple spacing caused by increasing or decreasing waves is investigated through movable bed experiments. Nondimensional length of rearranged ripples becomes very close to that of measured ripples in the field Furthermore, stochastic characteristics and occurrence limits of three dimensional ripples are investigated through the wave number spectrum calculated from the measured bottom topography.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.235-240
• /
• 2010

The foam produced by the effluent cooling water which is released to the discharge channel provokes civil complaints due to the visual pollution to the neighboring residents. In this study, a physical model test was conducted by placing tetrapods on the bottom slope of the discharge channel in order to suggest an effective method of reducing the amount of generated foam. Field application of the main results of the model test showed qualitatively apparent reduction of the foam generation at the discharge channel.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.344-350
• /
• 2019

In this study, waves2Foam implemented in OpenFOAM is used to simulate numerically the wave pressure on a verical caisson under the condition of with and without the placement of Tetrapods in front of the caisson. The comparisons of the numerical results and the experimental data show fairly good agreement between them. Based on this, it is possible to suggest an optimal combination of coefficients for an empirical formula to represent the protective TTP layer as porous media.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.800-812
• /
• 2014

The paper provides some results of a new procedure to analyze the hydrodynamic aspects of the interactions between maritime emerged breakwaters and waves by integrating CAD and CFD. The structure is modeled in the numerical domain by overlapping individual three-dimensional elements (Tetrapods), very much like the real world or physical laboratory testing. Flow of the fluid within the interstices among concrete blocks is evaluated by integrating the RANS equations. The aim is to investigate the reliability of this approach as a design tool. Therefore, for the results' validation, the numerical run-up and reflection effects on virtual breakwater were compared with some empirical formulae and some similar laboratory tests. Here are presented the results of a first simple validation procedure. The validation shows that, at present, this innovative approach can be used in the breakwater design phase for comparison between several design solutions with a significant minor cost.

• Korean Journal of Materials Research
• /
• v.25 no.6
• /
• pp.265-268
• /
• 2015

ZnO micro/nanocrystals at large scale were synthesized through the thermal evaporation of Al-Zn mixtures under air atmosphere. The effect of synthetic temperature and time on the morphology of the micro/nanocrystals was examined. It was found that the temperature and time affected the morphology of the ZnO crystals. At temperatures below $900^{\circ}C$, no crystals were synthesized. At a temperature of $1000^{\circ}C$, ZnO crystals with a rod shape were synthesized. With an increase in temperature from $1000^{\circ}C$ to $1100^{\circ}C$, the morphology of the crystals changed from rod shape to wire and granular shapes. As the time increased from 2 h to 3 h at $1000^{\circ}C$, tetrapod-shaped ZnO crystals started to form. XRD patterns showed that the ZnO crystals had a hexagonal wurtzite structure. EDX analysis revealed that the ZnO crystals had high purity. It is believed that the ZnO nanowires were grown via a vapor-solid mechanism because no catalyst particles were observed at the tips of the micro/nanocrystals in the SEM images.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.385-389
• /
• 2012

The application of microorganisms in the field of construction material is rapidly increasing worldwide; however, almost all studies that were investigated were bacterial sources with mineral-producing activity and not with organic substances. The difference in the efficiency of using bacteria as an organic agent is that it could improve the durability of cement material. This study aimed to assess the use of biofilm-forming microorganisms as binding agents to increase the compressive strength of cement-sand material. We isolated 13 alkaliphilic biofilmforming bacteria (ABB) from a cement tetrapod block in the West Sea, Korea. Using 16S RNA sequence analysis, the ABB were partially identified as Bacillus algicola KNUC501 and Exiguobacterium marinum KNUC513. KNUC513 was selected for further study following analysis of pH and biofilm formation. Cement-sand mortar cubes containing KNUC513 exhibited greater compressive strength than mineral-forming bacteria (Sporosarcina pasteurii and Arthrobacter crystallopoietes KNUC403). To determine the biofilm effect, Dnase I was used to suppress the biofilm formation of KNUC513. Field emission scanning electron microscopy image revealed the direct involvement of organic-inorganic substance in cement-sand mortar.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.3
• /
• pp.141-145
• /
• 2014

Tubular-shaped ZnO crystals were synthesized by thermal evaporation technique under air atmosphere. Mixture of Zn and Mg powder was used as the source material. The thermal evaporation and oxidation of Zn/Mg mixture were carried out for 1 hr at $1,000^{\circ}C$ and $1,200^{\circ}C$ under in air under atmospheric pressure. When only Zn powder was used as a source material, tetrapod-shaped ZnO crystals were synthesized. This provides that Mg played a key role in the formation of the tubular-shaped crystals. SEM images showed that the tubular-shaped ZnO crystals grew along [0001] direction. XRD spectrum revealed that the ZnO tubes had hexagonal wurtzite structure. Two emission peaks at 380 nm and 510 nm were observed in the room temperature cathodoluminescence spectrum.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.303-303
• /
• 2020

국내의 주요 외곽시설은 대수심화 및 설계외력의 증대 등으로 경제성 및 안정성 등의 확보를 위해 혼성제 형식의 구조물을 적용하는 사례가 주를 이루고 있다. 혼성제 근고부 안정성과 관련해서는, 설계파에 대한 안정적인 피복재 중량을 구하는 것이 설계상 중요하다. 기존의 직각 입사파에 대한 연구는 많이 수행되어 왔으나, 경사 입사파 조건에 대한 검토 사례는 미미한 실정이다. 또한 직각입사 뿐만 아니라 경사 입사파에 대한 근고부 중량산정식으로 확장된 Tanimoto식을 적용하고 있으나, 수리실험과 중량산정식에 대한 오차가 발생하고 있어 수리실험을 통해 기존의 산정식에 대한 검토가 필요하다. 따라서 본 연구에서는 경사입사파 조건에 따른 혼성제 제두부 구간의 피복재 안정성에 대하여 실험을 수행하였다. 설치수심은 0.3m 수심으로 고정하고, 입사각도를 0°, 30°, 45°, 60° 및 75°로 변화시켜 실험을 수행하였다. 전체 연장 10m의 모형에서 종점부 1m 구간을 실험구간으로 설정하고, 피복재의 종류는 피복석(50g), 콘크리트 피복블록(Tetrapod, Tripod)를 사용하였으며, 파랑조건은 불규칙파를 적용하였다. 주기 및 파고를 변화시켜 수리실험을 수행하였다. 실험결과는 제두부 구간에 피복된 피복재의 구간별 피해율을 분석하기 위해 구역분할도 적용하였으며, 확장된 Tanimoto식과 비교분석하여 중량산정식의 타당성을 검토하였다.