• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1018-1022
• /
• 1998

Characteristics and catalytic activities of 12-molybdophosphoricacid catalysts modified by ring opening polymerization of tetrahydrofuran (THF) were studied in this work. 12-Molybdophosphoricacid catalysts modified by THF showed higher conversions and product yields than the mother acid in the vapor-phase ethanol conversion. It was believed that the enhanced catalytic activities of modified 12-molybdophosphoricacids were due to structural flexibility of heteropolyanions and weakened hydrogen bond around heteropolyanions. THF interacted with protons and crystalline water molecules of heteropolyacids. The interaction between THF and heteropolyanoins, which crystalline water molecules act as intermediary, was the dominant factor deciding the catalytic activities of modified 12-molybophosphoricacids.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.221-226
• /
• 2008

Novel synthetic routes were proposed for hydroxy-terminated Poly(EO-co-THF) by Cationic ring-opening copolymerization of Tetrahydrofuran(THF) and Ethylene oxide(EO). It was carried out using Boron trfluoride tetrahydrofuranate($BF_3$ THF complex) as catalyst in the presence of 1,4-butandiol. The resultant products are well-defined linear polyetherpolyol. Polyurethane(TPU) were prepared using resultant polyetherpolyol with IPDI/N-100 as curing agent and TPB(Triphenylbismuth) /MA(Maleic anhydride) mixture as cure catalyst. Mechanical properties of TPU prepared from poly(EO-co-THF) polyol were investigated and compared with polyurethane using ATK HTPE.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.231-236
• /
• 2008

The well-defined copolymers derived from Epichlorohydrin(ECH), Tetrahydrofuran(THF) were synthesized by Cationic ring-opening polymerization(CROP) with 1,4-Butandiol, a initiator, and $BF_3THF$ Complex, a catalyst via Activated monomer mechanism, which could lead to hydroxyl-terminated polyethers. The molecular weight of polymers were dependant on the ratio of [monomer]/[diol], Copolymer structures were controlled by monomers feed ratio, ECH and THF added. This polymers were functionalized from Chlorine group to Azide group using $S_N2$ reaction. Synthesized polymers were found to be as the prepolymer for polyurethane. Polyurethane was synthesized in the presence of N-100/IPDI mixture, a curing agent, and TPB(triphenyl bismuth)/MA(Maleic anhydride) mixture, a catalyst system. The curing behavior and mechanical properties of polyurethane after mixing with various prepolymer’s composition and the molecular weight were studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.123.1-123.1
• /
• 2011

본 연구에서는 THF(Tetrahydrofuran)와 산화탄소나노튜브를 혼합한 유체가 메탄 하이드레이트 생성에 어떠한 영향을 미치는지 알아보기 위해 하이드레이트 생성실험을 수행하고 비교분석하였다. 먼저 하이드레이트 생성 시 정확히 큰 동공에 하나의 THF 분자를 위치시킬 수 있는 5.56 mol%의 THF 혼합유체와 0.003 wt%의 산화 탄소나노튜브를 첨가한 산화탄소나노유체에서 하이드레이트 생성실험을 수행한 결과 같은 과냉도에서 상평형은 THF가 우수하였으며, 하이드레이트 생성에 소모되는 가스소모량은 산화탄소나노튜브가 월등히 우수한 효과를 보였다. 따라서 이 두 종류 촉진제의 단점을 보완하고, 우수한 효과를 이끌어 내기 위해 THF와 산화탄소나노튜브를 혼합하였다. 0.003 wt%의 산화탄소나노유체에 5.56 mol%의 THF를 혼합하였으며, 하이드레이트 상평형, 가스소모량, 생성시간을 측정하여 증류수와 THF, 산화탄소나노유체와 비교하였다. 그 결과, THF+산화탄소나노튜브 혼합유체의 상평형은 THF의 상평형과 비슷하였으고, 과냉도 3.4K에서의 가스소모량은 산화나노유체가 증류수의 3.6배, THF가 증류수의 1.7배, THF+산화탄소나노튜브 혼합유체가 증류수의 5.2배로 THF+산화탄소나노튜브 혼합유체에서 가스소모량이 가장 높음을 알 수 있었다. 또한 하이드레이트 생성시간은 같은 과냉도에서 THF+산화탄소나노튜브 혼합유체가 THF보다 빠르며, 산화탄소나노유체의 하이드레이트 생성시간과 비슷함을 보였다. 따라서 THF+산화탄소나노튜브 혼합유체는 THF의 우수한 상평형 효과와 탄소나노튜브의 높은 가스소모량 효과를 같이 가지고 있음을 확인하였다.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1484-1487
• /
• 1999

Extraction is the most important and tedious step to determine water-soluble vitamin C in water-insoluble chewing gum. For the rapid determination of vitamin C in chewing gum, a new method of dispersion in tetrahydrofuran(THF) was performed. Vitamin C was easily extracted from gum base using THF The content of vitamin C in chewing gum was rapidly quantified with high reliability by an enzymatic method using a chewing gum sample dispersed in tetrahydrofuran.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.10
• /
• pp.1115-1117
• /
• 1999

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.915-920
• /
• 1996

Fine mullite precursor was prepared by colloidal sol-gel processes. Aluminum isopropoxide $[Al(i-OC_3H_7)_3]$ as a starting material of $Al_2O_3$ and silicic acid extracted by THF from sodium silicate as a starting material of $SiO_2$ were used. Sodium silicate was first acidified by dilute sulfuric acid to form silicic acid. ; followed by extraction using THF, Mullite precursor was synthesized by sol-gel processes from aluminum isopropoxide and sillicic acid considering the degree of extraction of Si and the removal efficiency of Na. The impurity content of silicic acid extracted by THF was below 0.04% Synthetic mullite precursor consisted of $3Al_2O_3{\cdot}2SiO_2$ and showd spherical particles of $0.05{\mu}m$ diameter and below 0.462% of impurites. The mullite precursor was characterized by EDS, XRD, TG/DSC SEM, FT-IR spectroscopy ICP and TEM.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.3
• /
• pp.156-161
• /
• 2011

Objectives: Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. THF has been used as a solvent and a precursor for various syntheses of polymers. However, THF is known to irritate to the eyes, skin and mucus membranes. Overexposure by inhalation, ingestion or skin contact may produce nausea, dizziness, headaches, respiratory irritation and possible skin burns. The purpose of this study is to evaluate of the worker exposure and characteristics of workers in the workplaces that use or manufacture THF. Methods: Sixteen factories in Korea, which manufacture or use THF, were selected for this study and a total of 130 air samples including 104 time-weighted average (TWA) samples and 26 short-term exposure limit (STEL) samples, were collected. Air samples were collected with charcoal tube (100mg/50mg) and analyzed by gas chromatograph/flame ionization detector(GC/FID). Results: The TWA concentration of THF was 16.05ppm (GM) at PS script printing, 2.32ppm (GM) at PVC stabilizer, 1.03ppm (GM) at Lithium triethylborohydride, 0.63ppm (GM) at Polytetramethylene ether glycol(PTMEG), 0.42ppm (GM) at Manufacturing THF, 0.13ppm (GM) at Glue and 0.12ppm (GM) at synthetic rubber/resins. Two out of sampes for PS script printing exceeded 50ppm as 8-hour exposure limit of MOEL. The short term exposure to THF was 54.77ppm (GM) at PS script printing, 17.10ppm (GM) at PTMEG, 13.76ppm (GM) at Manufacturing THF, 2.86ppm (GM) at Lithium triethylborohydride, 0.87ppm (GM) at synthetic rubber/resins and 0.13ppm (GM) Glue. We found that the highest exposure process for both the TWA and STEL samples was PS script process. Two samples exceeded 100ppm as short term exposure limit of Ministry of Employment and Labor(MOEL). Conclusions: Characteristic of STEL concentration for THF is considerably different from TWA concentration in workplaces because workers could exposure high concentration of THF in a moment when they work irregularly schedule. So exposure controls for momentary works have to be prepared, and considered the skin absorption and inhale of THF.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.367-372
• /
• 2022

The effect of the addition of a polyvinylchloride (PVC) non-solvent to a PVC-tetrahydrofuran (THF) solution on the surface properties of the PVC thin film was analyzed. The non-solvents used were composed of alcohol-based and non-alcoholic ones. Surface morphologies of PVC thin films according to the addition of the non-solvent were compared. In addition, the hydrophobic properties relying on the surface characteristics were compared. The micro-bubbles generated in the preparation of PVC-THF solution affected the surface morphology of the thin film. In order to implement the normal surface physical properties of the coating thin film at the relatively high concentration of PVC-THF solution, the selection of appropriate drying method was required. When an alcohol-based non-solvent was added, a PVC thin film having a granular porous surface was obtained and exhibited super hydrophobic properties. The volume ratio of the PVC-THF solution to the non-solvent affects the surface shape of the coating thin film. The larger the amount of non-solvent was added, the more advantageous it was to form a super hydrophobic PVC thin film.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3717-3722
• /
• 2021

In this study, the recovery rates of the dissolution method for radioactivity analysis of expandable polystyrene (EPS) with a liquid scintillation counter (LSC) using tetrahydrofuran (THF), toluene, and acetone as solvents were estimated. The detection efficiency calibration curve for each solvent was derived. Two methods-the volumetric ratio method and the quenching agent method-were used to prepare quench source sets, and calibration curves were derived by linking the data from the two quench source sets. The R² value of the calibration curve for THF was found to be 0.984. The relationship between the mass of dissolved EPS and the quench level was estimated: the quench level increased as the mass of dissolved EPS increased. Premix and postmix dissolution methods were tested. The recovery rates using THF with the premix method were 84.9 ± 0.9% and 96.5 ± 1.5% for ³H and ¹⁴C, respectively. Furthermore, the stability of the recovery rate over time when using THF was evaluated. The dissolution method with the premixed solution exhibited a more stable recovery rate over time. The dissolution methods were found to be applicable for analysis using LSC, and THF was found to be the most suitable solvent for the proposed method.