• 비파괴검사학회지
• /
• 제28권1호
• /
• pp.64-69
• /
• 2008

압력용기 및 구조물 용접부의 내부결함을 검출하기 위해서는 방사선투과시험과 초음파탐상시험을 시행한다. 그러나 방사선투과시험은 방사선 노출 위험성과 필름 현상처리 소요 등으로 결과의 확인에 상대적으로 긴 시간이 소요되어 제작 공정에 영향을 준다. 일반적인 수동 초음파탐상시험은 결과의 재현이 용이하지 않으며 검사자의 기량에 대한 의존도가 높다는 문제점을 가지고 있다. 이에 대한 대안으로 자동 초음파탐상시험 기법의 하나인 TOFD의 적용이 확산되고 있다. 본 연구는 결함을 포함한 시험편에 대하여 방사선투과 시험과 TOFD 기법을 적용하고 비교한 결과를 기술하였다. TOFD 기법은 초음파 시험기법의 객관적 신뢰도 향상에 기여하게 될 것으로 판단된다.

• International Journal of Reliability and Applications
• /
• 제3권2호
• /
• pp.81-90
• /
• 2002

The importance of the reliability of software is growing more and more as more complicated digital computer systems are used for real-time control applications. To provide more reliable software, the testing period should be long enough, but not unnecessarily too long. In this study, we suggest a simple but effective stopping rule which can provide just proper amount of testing time. We take unique features of software into consideration and adopt non-homogeneous Poisson process model and Bayesian approach. A numerical example is given to demonstrate the validity of our stopping rule.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.122-127
• /
• 2005

This paper proposes a prototype IED hardware design and it's real-time experimental results. To evaluate performance of the IED, the study is well constructed power system model including power transformer utilizing the EMTP software and the testing is made through simulation of various cases. The relaying that is well constructed using DSP chip and RISC CPU etc. has been developed and the prototype IED has been verified through on-line testing by LabVIEW simulator. The results show that an advanced relaying based prototype IED never mis-operated.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.226-232
• /
• 2004

Use of electric pulp testing elicits painful response in vital teeth. In this study, we examined the excessive time from pain feeling to stimulation disconnection in clinical situation. D626D (Parkell Inc., USA.) scan type electric pulp tester was used in total of 23 young healthy individuals. Each of the right central incisors and first premolars were used as testing teeth. Stimulation disconnection was achieved by EMG in anterior belly of digastric muscle, finger span, and voice and the excessive stimulation time over the sensory thresh-old was recorded. As a result, we found that the short responses before the stimulation disconnection appeared following order：EMG, finger span, and voice. The EMG disconnection is suggested to be used to reduce the excessive stimulus time in electric pulp testing.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.255-261
• /
• 2007

By using numerical analysis methods, through transmission type pulsed eddy current (PEC) testing is modeled and PEC signal responses due to varying material conductivity, permeability, thickness, lift-off and pulse width are investigated. Results show that the peak amplitude of PEC signal gets reduced and the time to reach the peak amplitude is increased as the material conductivity, permeability, and specimen thickness increase. Also, they indicate that the pulse width needs to be shorter when evaluating the material conductivity and the plate thickness using the peak amplitude, and when the pulse width is long, the peak time is found to be more useful. Other results related to lift-off variation are reported as well.

• 응용통계연구
• /
• 제2권2호
• /
• pp.61-78
• /
• 1989

정상조건에서 수명이 상당히 긴 개체의 생명검사(Life Test)를 현실적으로 수행하기 위하여 제안된 충격생명검사에 관하여 고찰하였다. 생명검사의 결과로 얻는 자료의 통계적 분석을 위하여 이미 제안된 모형의 검토와 이들을 일면 포함하는 모형을 제시하고 그에 따르는 통계적 추론 과정을 최대우도추정법과 가중최소자승법을 사용하여 토의하였다. 한편 검사를 계획할 때 발생하는 실험설계의 문제를 검토하고 단순 계단적 충격검사에서 잘려진 자료(Consored Data)를 포함한 경우를 연구하였다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2004년도 정기학술대회
• /
• pp.227-232
• /
• 2004

The failure of geogrids can be defined as an excessive creep strain which causes the collapse of slopes and embankments. In this study, the accelerated creep tests were applied to two different types of polyester geogrids, at 75, 80, 85$^{\circ}C$ by applying 50% load of ultimate tensile strengths using a newly designed test equipment which is allowed the creep testing at higher temperatures. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results indicate that the conventional procedures with the newly designed test equipment are shown to be effective in prediction of the lifetimes of geogrids with shorter test times. In addition, the predicted lifetimes of geogrids having different structures at various creep strains give guidelines for users to select the proper geogrids in the fields.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.176-186
• /
• 1996

As the density of VLSI increases, the conventional logic testing is not sufficient to completely detect the new faults generated in design and fabrication processing. Recently, IDDQ testing becomes very attractive since it can overcome the limitations of logic testing. In this paper, G-ATPG (gyeongsang automatic test pattern genrator) is designed which is able to be adapted to IDDQ testing for combinational CMOS VLSI. In G-ATPG, stuck-at, transistor stuck-on, GOS (gate oxide short)or bridging faults which can occur within priitive gate or XOR is modelled to primitive fault patterns and the concept of a fault-sensitizing gate is used to simulate only gates that need to sensitize the faulty gate because IDDQ test does not require the process of fault propagation. Primitive fault patterns are graded to reduce CPU time for the gates in a circuit whenever a test pattern is generated. the simulation results in bench mark circuits show that CPU time and fault coverage are enhanced more than the conventional ATPG using IDDQ test.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.598-606
• /
• 1996

Computer testing system for pumps is an automatic measuring and testing system micro computer. There are two functions to this system. 1. Automatically controlling the testing processes. It includes controlling to testing devices, adjusting test points and starting or stopping the pump. 2. Automatically collecting and calculating the testing data. It includes the collection and calculation of the parameters to be measured, printing the testing reports and plotting the testing curves. When using it the measuring accuracy may be improved and the time for testing may be compressed by use the system . So it is used widely on the world. In this paper the basic construction and the work principle and the testing processes are described.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1105-1129
• /
• 2014

The unscented Kalman filter (UKF) has been developed for nonlinear model parametric identification, and it assumes that the model parameters are symmetrically distributed about their mean values without any constrains. However, the parameters in many applications are confined within certain ranges to make sense physically. In this paper, a constrained unscented Kalman filter (CUKF) algorithm is proposed to improve accuracy of numerical substructure modeling in hybrid testing. During hybrid testing, the numerical models of numerical substructures which are assumed identical to the physical substructures are updated online with the CUKF approach based on the measurement data from physical substructures. The CUKF method adopts sigma points (i.e., sample points) projecting strategy, with which the positions and weights of sigma points violating constraints are modified. The effectiveness of the proposed hybrid testing method is verified by pure numerical simulation and real-time as well as slower hybrid tests with nonlinear specimens. The results show that the new method has better accuracy compared to conventional hybrid testing with fixed numerical model and hybrid testing based on model updating with UKF.