• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.809-828
• /
• 2008

Real-time hybrid testing is an attractive method to evaluate the response of structures under earthquake loads. The method is a variation of the pseudodynamic testing technique in which the experiment is executed in real time, thus allowing investigation of structural systems with time-dependent components. Real-time hybrid testing is challenging because it requires performance of all calculations, application of displacements, and acquisition of measured forces, within a very small increment of time. Furthermore, unless appropriate compensation for time delays and actuator time lag is implemented, stability problems are likely to occur during the experiment. This paper presents an approach for real-time hybrid testing in which time delay/lag compensation is implemented using model-based response prediction. The efficacy of the proposed strategy is verified by conducting substructure real-time hybrid testing of a steel frame under earthquake loads. For the initial set of experiments, a specimen with linear-elastic behavior is used. Experimental results agree well with the analytical solution and show that the proposed approach and testing system are capable of achieving a time-scale expansion factor of one (i.e., real time). Additionally, the proposed method allows accurate testing of structures with larger frequencies than when using conventional time delay compensation methods, thus extending the capabilities of the real-time hybrid testing technique. The method is then used to test a structure with a rate-dependent energy dissipation device, a magnetorheological damper. Results show good agreement with the predicted responses, demonstrating the effectiveness of the method to test rate-dependent components.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.17-24
• /
• 2012

Recently automotive software has been more complex and needs to be reduced its development time. Software testing of its functionalities and performance should be conducted in an early development phase to reduce time to market and the development cost. Software functional testing can be performed through simulating the hardware, but it is not guaranteed that evaluation of real-time performance using simulation has enough accuracy. Real-time performance can be precisely evaluated with hardware-in-the-loop simulation, but it costs time and effort to set up hardware for testing. In this paper, we suggest a testing system that can evaluate functional requirements and real time properties with a general-purpose development board in the early development phase. In addition, we improve reusability of the testing system through modularized and layered architecture. With the proposed testing system we can contribute to building reliable testing system at low cost without difficulty.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.700-702
• /
• 2005

The most electrical apparatus should be able to withstand short-time current and peak current during a specified short time until circuit breakers have interrupted fault current. It defines the short-time withstand ability of electric a apparatus to be remain for a time interval under high fault current conditions. It is specified by both dynamic ability and thermal capability. KERI(Korea Electrotechlology Research Institute) recently constructed the new short-time current and low voltage short circuit testing facilities. This paper shows short- circuit calculation of transformer and describes high current measuring system, and evaluate the result of short-time withstand test used in $3{\phi}$ 90MVA short-time current testing facilities.

• Journal of Information Technology Applications and Management
• /
• v.12 no.2
• /
• pp.1-13
• /
• 2005

This paper proposes a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase after developing it. The time-dependent behavior of testing effort expenditures is described by a Logistic curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, This paper discusses the relations between testing time and reliability and between duration following failure fixing and reliability are studied. SRGM in several literatures has used the exponential curve, Railleigh curve or Weibull curve as an amount of testing effort during software testing phase. However, it might not be appropriate to represent the consumption curve for testing effort by one of already proposed curves in some software development environments. Therefore, this paper shows that a logistic testing-effort function can be adequately expressed as a software development/testing effort curve and that it gives a good predictive capability based on real failure data.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1462-1471
• /
• 2019

Real-time embedded systems have become pervasive in general industry. They also began to be applied in such domains as avionics, automotive, aerospace, healthcare, and industrial Internet. However, the system failure of such domains could result in catastrophic consequences. Runtime software testing is required in such domains that demands very high accuracy. Traditional runtime software testing based on handwork is very inefficient and time consuming. Hence, test automation methodologies in runtime is demanding. In this paper, we introduce a software testing system that translates a real-time software into a monitorable real-time software. The monitorable real-time software means the software provides the monitoring information in runtime. The monitoring target are time constraints of the input real-time software. We anticipate that our system lessens the burden of runtime software testing.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.835-842
• /
• 2001

We propose a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase. The time-dependent behavior of testing effort expenditures is described by a Weibull curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, we discuss the relations between testing time and reliability and between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through studying the cost for each condition. Also, the release time is determined depending on the conditions of the specified reliability. The optimum release time is determined by simultaneously studying optimum release time issue that determines both the cost related time and the specified reliability related time.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.9-16
• /
• 2018

Recently, as various IP set-top boxes based on Android OS have been widely used in general households and public facilities, complaints about services and set-top boxes have continued to increase as much as other smart devices. In order to reduce this problem, the manufacturer performs the testing work before the product is commercialized. However, the testing can reduce potential defects in the product, but it can not prove that the product is free of defects. Therefore, the quality of the product can vary depending on how effective testing techniques are introduced. In this paper, we propose a new exploratory testing method that minimizes test case creation time and makes it easier to plan and execute test while simultaneously learning how to run the product under test. Using the first proposed method, the test time is reduced by about 16.7 hours and the defect detection rate is 25.4% higher than the formal specification-based testing method. Informally, the test time was shortened by about 4.7 hours and the defect detection rate was 13% higher than the informal experience-based testing method.

• Journal of the Korean Statistical Society
• /
• v.11 no.2
• /
• pp.77-87
• /
• 1982

The choice if constants that define a life testing procedure is considered in terms of the test termination time (censoring time) and the number of items to be tested subject to a given range of variance of the expected life time, where the failure time of life testing is exponentially distributed.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1269-1289
• /
• 2014

With the sub-stepping technique, the numerical analysis in real-time dynamic hybrid testing is split into the response analysis and signal generation tasks. Two target computers that operate in real-time may be assigned to implement these two tasks, respectively, for fully extending the simulation scale of the numerical substructure. In this case, the integration time-step of solving the dynamic response of the numerical substructure can be dozens of times bigger than the sampling time-step of the controller. The time delay between the real and desired feedback forces becomes more striking, which challenges the well-developed delay compensation methods in real-time dynamic hybrid testing. This paper focuses on displacement prediction and force correction for delay compensation in the real-time dynamic hybrid testing with a large integration time-step. A new displacement prediction scheme is proposed based on recently-developed explicit integration algorithms and compared with several commonly-used prediction procedures. The evaluation of its prediction accuracy is carried out theoretically, numerically and experimentally. Results indicate that the accuracy and effectiveness of the proposed prediction method are of significance.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.444-447
• /
• 2006

We propose software reliability growth model, considering testing effort resource during testing stage of S/W, and compare the time dependent testing effort resource behavior in this paper. We develop the data technology method for the S/W reliability measure. We study in detail between the time elapse and reliability. Also, we determine the optimum release time which meets the target reliability. We decide optimum release time for each condition how the reliability is good before testing after development.