• Journal of the Korean Wood Science and Technology
• /
• 제28권1호
• /
• pp.18-27
• /
• 2000

목재와 목질재료는 물리적 및 기계적 성질에 큰 변이를 지니므로 표러쉬 문의 표면재을 동일한 재료로 제조하는 경우에도 주위 환경의 변화에 따라 틀어짐이 발생할 수 있다. 틀어짐을 예측하는데 필요한 치수변동계수(LMC)와 탄성계수 등은 ASTM 규정대신에 전건법과 동적 탄성계수로 추정할 수 있었다. 틀어짐과 LMC간 관계는 곡선적이지만, 틀어짐과 탄성계수간에는 선형관계를 나타내었다. 경질섬유판과 합판과 같은 표면재의 재료성질은 정규분포를 나타내었다. 그러나 그 변이는 경질섬유판보다 합판이 훨씬 더 컸다. 확율분포 모수와 틀어짐의 관계를 이용해 몬테카롤로 시뮬레이션을 한 결과 틀어짐의 발생 크기에 따른 프러쉬 문의 불량율을 예측할 수 있었다.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1377-1382
• /
• 2011

최근, 화석연료의 고갈과 환경오염의 문제로 인해 차세대 신재생 에너지에 대한 관심이 증대되고 있다. 그 중 수소연료는 친환경, 저장의 용이, 손쉬운 제조 등과 같은 장점에 반해 가연범위가 넓고, 폭발의 위험성이 단점으로 대두되고 있다. 본 연구에서는 간편한 SP 시험법을 이용하여 고압수소가스 분위기 하에서 in-situ 수소취화거동을 평가할 수 있는 시험기법을 확립하고자 한다. 그 적용성을 평가하기 위해서 수소저장용기 재료로 사용되는 스테인리스강(SUS316L)을 사용하여 대기압, 고압 헬륨 및 수소가스 분위기에서 시험하였다. 실험결과, 고압 수소가스 분위기에서는 수소 침투로 인해, 대기압 및 헬륨가스 분위기하에서와 달리, 시험편 표면에 미세균열 발생과 하중-변위 선도상 소성불안정 변형 영역에서 연신율 감소를 가져왔고, 파면관찰 결과 수소취화 균열이 관찰되어 SP시험법의 유효성을 나타내었다.

• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1355-1360
• /
• 2013

균열이 발생된 고체추진제는 연소면적 증가에 따른 과연소 현상으로 인해 로켓의 손상 또는 파괴까지 일어날 수 있기 때문에 파괴인성을 평가하는 것은 매우 중요하다. 이 재료에 파괴인성에 미치는 온도 및 두께의 영향을 확인하기 위하여, 시험 온도는 $-60^{\circ}C$에서 $60^{\circ}C$ 범위, 시편의 두께는 4, 12.5, 24.5 mm 의 3 종류로 변화하여 Center cracked tension(CCT) 시편을 이용하여 파괴인성을 평가하였다. 본 시험 결과로부터 파괴인성은 온도 증가와 함께 감소하는 경향을 보이고 두께 변화에 대한 파괴인성은 $-60^{\circ}C$를 제외한 다른 온도조건에서 두께 12.5 mm 일 때 가장 크게 나타나고 있다. 고체추진제의 파괴인성은 $-60^{\circ}C$부근에서 유리전이거동에 의한 변화하는 것을 알 수 있다.

• Smart Structures and Systems
• /
• 제26권4호
• /
• pp.495-506
• /
• 2020

Monitoring of complex processes faces several challenges mainly due to the lack of relevant sensory information or insufficient elaborated decision-making strategies. These challenges motivate researchers to adopt complex data processing and analysis in order to improve the process representation. This paper presents the development and implementation of quality monitoring framework based on a model-driven approach using embedded artificial intelligence strategies. In this work, the strategies are applied to the supervision of a microfabrication process aiming at showing the great performance of the framework in a very complex system in the manufacturing sector. The procedure involves two methods for modelling a representative quality variable, such as surface roughness. Firstly, the hybrid incremental modelling strategy is applied. Secondly, a generalized fuzzy clustering c-means method is developed. Finally, a comparative study of the behavior of the two models for predicting a quality indicator, represented by surface roughness of manufactured components, is presented for specific manufacturing process. The manufactured part used in this study is a critical structural aerospace component. In addition, the validation and testing are performed at laboratory and industrial levels, demonstrating proper real-time operation for non-linear processes with relatively fast dynamics. The results of this study are very promising in terms of computational efficiency and transfer of knowledge to manufacturing industry.

• 한국재료학회지
• /
• 제25권11호
• /
• pp.630-635
• /
• 2015

The fatigue strength of a nickel-base superalloy was studied. Stress-controlled fatigue tests were carried out at $700^{\circ}C$ and 5 Hz using triangular wave forms. In this study, two kinds of testing procedures were adopted. One is the conventional tension-zero fatigue test(R = 0). The other was a procedure in which the maximum stress was held at 1000 MPa and the minimum stress was diverse from zero to 1000 MPa at 24 and $700^{\circ}C$. The results of the fatigue tests at $700^{\circ}C$ indicate that the fracture mechanism changed according to both the mean stress and the stress range. At a higher stress range, ${\gamma}^{\prime}$ precipitates are sheared by a/2<110> dislocation pairs coupled by APB. Therefore, in a large stress range, the deformation occurred by shearing of ${\gamma}^{\prime}$ by a/2<110> dislocations, which brought about crystallographic shear fracture. As the stress range was decreased, the fracture mode gradually changed from crystallographic shear fracture to gradual growth of fatigue cracks. At an intermediate stress range, as it became more difficult for a/2<110> dislocation pairs to shear ${\gamma}^{\prime}$ particles, cracks started to propagate in the matrix, avoiding the harder ${\gamma}^{\prime}$ particles. High mean stress induced creep deformation, that is, ${\gamma}^{\prime}$ particles were sheared by {111}<112> slip systems, which led to the formation of stacking faults in the precipitates. Thus, the change in fracture mechanism brought about the inversion of the S-N curves.

• 한국환경농학회지
• /
• 제33권1호
• /
• pp.1-8
• /
• 2014

BACKGROUND: Recent studies using many amendments for heavy metal stabilization in soil were conducted in order to find out new materials. But, the studies accounting for the use of appropriate amendments considering soil pH remain incomplete. The aim of this study was to investigate the effects of initial soil pH on the efficiency of various amendments. METHODS AND RESULTS: Acid soil and alkali soil contaminated with heavy metals were collected from the agricultural soils affected by the abandoned mine sites nearby. Three different types of amendments were selected with hypothesis being different in stabilization mechanisms; organic matter, lime stone and iron, and added with different combination. For determining the changes in the extractable heavy metals, water soluble, Mehlich-3, Toxicity Characteristic Leaching Procedure, Simple Bioavailability Extraction Test method were applied as chemical assessments for metal stabilization. For biological assessments, soil respiration and root elongation of bok choy (Brassica campestris ssp. Chinensis Jusl.) were determined. CONCLUSION: It was revealed that lime stone reduced heavy metal mobility in acid soil by increasing soil pH and iron was good at stabilizing heavy metals by supplying adsorption sites in alkali soil. Organic matter was a good source in terms of supplying nutrients, but it was concerning when accounting for increasing metal availability.

• 구강회복응용과학지
• /
• 제23권4호
• /
• pp.269-281
• /
• 2007

Fluoric acid etching is an essential procedure in cementation of reinforced ceramics to tooth surface. But there have been few studies about the changes of surface structure and flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to the etching time. The objectives of this study were to examine the surface structure changes and the difference in biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic according to various etching times. Sixty one disk-shaped specimens of IPS $Empress^{(R)}$ 2 ceramic($14mm{\times}1.2mm$) were fabricated for the biaxial flexural strength test and SEM analysis according to the manufacturer's recommendations. Sixty specimens were divided into 6 groups(n=10) according to the time of HF acid etching(0, 20, 180 and 300s)and silane/resin cement application. Each disk was loaded using a piston-on-3 ball biaxial configuration in a universal testing machine. The failure loads(N) were recorded, and the biaxial flexural strength for each disk was calculated. A one-way analysis of variance and independent t-test on transformed fracture strength data were used to determine significant differences between groups. The groups of no cementation showed a trend toward progressive weakening with increasing the etching time. However, this was not statistically significant at p=0.05 level. The groups of resin cementation exhibited no apparent trend in their mean strength values. SEM photomicrographs showed very different results of etching. Within the conditions of this study, alteration of surface topography by acid etching does not have a deleterious effect on the biaxial flexural strength of IPS $Empress^{(R)}$ 2 ceramic.

• 한국컴퓨터정보학회논문지
• /
• 제17권3호
• /
• pp.175-183
• /
• 2012

본 연구는 동료평가 시스템의 활용도 제고 방안을 모색하기 위한 목적으로 수행되었다. 동료평가는 신뢰성과 타당성을 확보함에도 불구하고 평가 참여자의 측정치 왜곡 등 부정확한 평가결과로 폭넓게 활용되지 못하고 있다. 최근의 성과평가 연구에서는 평가가 이루어지는 프로세스에 대한 이해를 도모하기 위해 조직차원의 상황맥락에 주목하고 있다. 본 연구는 평가행동에 영향을 미치는 상황맥락요인으로 평가 자신감 및 평가 타당성을, 개인 성격 특성으로 자기모니터링을 채택하고 평가행동에 미치는 영향을 검증하였다. 445명의 학생을 대상으로 자료를 수집하여 가설을 검증한 결과, 평가 자신감 및 평가 타당성은 정확한 평가행동을 유인함이, 또한 자기모니터링은 조절효과를 가짐이 검증되었다. 기타 시사점 및 향후 연구를 위한 제언도 포함하였다.

• Nuclear Engineering and Technology
• /
• 제38권4호
• /
• pp.375-382
• /
• 2006

Characterization tests (load vs. displacement curve) are conducted for the springs of Zirconium alloy spacer grids for an advanced LWR fuel assembly. Twofold testing is employed: strap-based and assembly-based tests. The assembly-based test satisfies the in situ boundary conditions of the spring within the grid assembly. The aim of the characterization test via the aforementioned two methods is to establish an appropriate assembly-based test method that fulfills the actual boundary conditions. A characterization test under the spacer grid assembly boundary condition is also conducted to investigate the actual behavior of the spring in the core. The stiffness of the characteristic curve is smaller than that of the strap-wised boundary condition. This phenomenon may cause the strap slit condition. A spacer grid consists of horizontal and vertical straps. The strap slit positions are differentiated from each other. They affords examination of the variation of the external load distribution in the grid spring. Localized legions of high stress and their values are analyzed, as they may be affected by the spring shape. Through a comparison of the results of the test and FE analysis, it is concluded that the present assembly-based analysis model and procedure are reasonably well conducted and can be used for spring characterization in the core. Guidelines for improving the mechanical integrity of the spring are also discussed.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.173-181
• /
• 2017

장애물제거기는 선로 내 장애물에 의한 충돌사고 발생 시 장애물을 선로 밖으로 밀어내거나 에너지흡수부재를 통해 충돌에너지를 흡수하여 열차 탈선을 방지하고 충돌사고에 의한 피해를 최소화하기 위한 장치이다. 본 연구에서는 인장형 에너지흡수부재와 4절 링크를 이용하여 장애물제거기의 작동 메커니즘을 구성하여 장애물제거기를 설계하였다. 또한 EN 15227에서 요구하는 정적강도 및 에너지흡수조건을 확인하기 위한 성능검증시험 방법을 고안한 뒤 유한요소해석 및 UTM (Universal Test Machine)을 이용한 성능검증시험을 수행하였다. 본 연구를 통해 EN 15227의 요구조건을 만족하는 장애물제거기를 개발하였으며, 제안된 장애물제거기의 설계 및 검증 절차에 따라 붕괴하중의 조절이 가능하며 이를 실험을 통해 검증할 수 있는 방법을 제안하였다.