• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1756-1760
• /
• 2004

Circulating Fluidized-Bed (CFB) boilers which have been operated in Korea were manufactured by the design technology of foreign leading companies. As they are not active to transfer their technology, domestic companies don't have the enough ability to design it independently yet. Doosan Heavy Industries & Construction Co. Ltd. and Korean Institute of Energy Research are trying to develop and improve the particle re-circulating device among the components of CFB boiler. Our purpose is to control the amount of particles leaving the re-circulating system by adjusting utility air and reuse the heat of circulating particles. The results of experiments with cold model system show that a fluidization state in the particle re-circulating device is very stable when the amount of utility air is supplied to its wind box with 2.29 times of minimum fluidization velocity. Also the amount of particles entering the riser don't increase linearly when the amount of utility air is supplied over 2.5 times of minimum fluidization velocity. Now we are testing its functional run with the hotstate experiment set-up.

• 비파괴검사학회지
• /
• 제22권5호
• /
• pp.465-473
• /
• 2002

영상 데이타는 전송, 검출 및 처리과정에서 여러 잡음에 의해 훼손될 수 있다. 적응성 가중 메디안 필터라는 공간변화 필터를 사용하여 방사선 투과영상의 양자 잡음을 제거하였다. 제안된 필터는 처리 윈도우 내 각 픽셀의 국소 통계치의 변화에 따라 필터의 성능이 변화하여 에지를 최대한 보존하면서 잡음만을 제거하고자 이러한 국소 통계 값에 근거한 적응성 가중 메디안 휠터 (AWMF)를 제시한다. AWMF를 구현함에 있어 두 가지 방법으로 나뉘는데, 우선 국소 통계의 특성에 따라 3개의 영역으로 분류하여 가중치를 부여하는 간단한 비선형 필터이고, 다음으로는 잡음모델로부터 국소 통계의 특성에 따라 경계(edge) 영역과 균일 영역으로 구분하여 영상시스템에 적당한 균일 척도 값을 구하여 영상의 공간적인 변화 정도를 판단하는 기준이 되도록 하였다. 제안한 알고리듬은 IBM-PC 상에서 C 언어로 구현하였으며 AWMF가 다른 잡음 제거 필터들과의 성능 비교를 통하여 경계는 보존하면서 잡음은 최대한 제거하는 우수한 필터임을 검증하였다.

• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.599-611
• /
• 2022

Tendon reinforced cemented soil is applied extensively in foundation stabilisation and improvement, especially in areas with soft clay. To solve the deterioration problem led by steel corrosion, the glass fiber-reinforced polymer (GFRP) tendon is introduced to substitute the traditional steel tendon. The interface bond strength between the cemented soil matrix and GFRP tendon demonstrates the outstanding mechanical property of this composite. However, the lack of research between the influence factors and bond strength hinders the application. To evaluate these factors, back propagation neural network (BPNN) is applied to predict the relationship between them and bond strength. Since adjusting BPNN parameters is time-consuming and laborious, the particle swarm optimisation (PSO) algorithm is proposed. This study evaluated the influence of water content, cement content, curing time, and slip distance on the bond performance of GFRP tendon-reinforced cemented soils (GTRCS). The results showed that the ultimate and residual bond strengths were both in positive proportion to cement content and negative to water content. The sample cured for 28 days with 30% water content and 50% cement content had the largest ultimate strength (3879.40 kPa). The PSO-BPNN model was tuned with 3 neurons in the input layer, 10 in the hidden layer, and 1 in the output layer. It showed outstanding performance on a large database comprising 405 testing results. Its higher correlation coefficient (0.908) and lower root-mean-square error (239.11 kPa) were obtained compared to multiple linear regression (MLR) and logistic regression (LR). In addition, a sensitivity analysis was applied to acquire the ranking of the input variables. The results illustrated that the cement content performed the strongest influence on bond strength, followed by the water content and slip displacement.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권2호
• /
• pp.12-15
• /
• 2012

This paper presents simulation and small-scale experimental tests of a fault current controller. Smart fault controller as proposed and proven conceptually in our previous work is promising technology for the smart power grid where distributed and even stochastic generation sources are prevalent and grid operations are more dynamic. Existing protection schemes simply limiting the fault current to the pre-determined set values may not show best performance and even lead to coordination failures, potentially leading to catastrophic failure. Thus, this paper designs fault current controller with a full bridge thyristor rectifier, embedding a superconducting coil for which the controller is electrically invisible during normal operation because the loss due to the coil is near-zero. When a fault occurs and the resulting current through the superconducting coil exceeds a certain value set intelligently based on the current operating condition of the grid, the magnitude of the fault current is controlled to this desired value by adjusting the firing angles of thyristors such that the overall system integrity is successfully maintained. Detailed time-domain simulations are performed and lab-scale testing circuits are built to demonstrate the desired functionality and efficacy of the proposed fault current controller.

• 한국환경보건학회지
• /
• 제43권4호
• /
• pp.298-306
• /
• 2017

Objectives: Since 1998, the Korea National Health and Nutrition Examination Survey (KNHANES) has been conducted in order to investigate the health and nutritional status of Koreans. The food intake data of individuals in the KNHANES has also been utilized as source dataset for risk assessment of chemicals via food. To improve the reliability of intake estimation and prevent missing data for less-responded foods, the structure of integrated long-standing datasets is significant. However, it is difficult to merge multi-year survey datasets due to ineffective cleaning processes for handling extensive numbers of codes for each food item along with changes in dietary habits over time. Therefore, this study aims at 1) cleaning the process of abnormal data 2) generation of integrated long-standing raw data, and 3) contributing to the production of consistent dietary exposure factors. Methods: Codebooks, the guideline book, and raw intake data from KNHANES V and VI were used for analysis. The violation of the primary key constraint and the $1^{st}-3rd$ normal form in relational database theory were tested for the codebook and the structure of the raw data, respectively. Afterwards, the cleaning process was executed for the raw data by using these integrated codes. Results: Duplication of key records and abnormality in table structures were observed. However, after adjusting according to the suggested method above, the codes were corrected and integrated codes were newly created. Finally, we were able to clean the raw data provided by respondents to the KNHANES survey. Conclusion: The results of this study will contribute to the integration of the multi-year datasets and help improve the data production system by clarifying, testing, and verifying the primary key, integrity of the code, and primitive data structure according to the database normalization theory in the national health data.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.247-255
• /
• 2013

The flight control of re-entry vehicles poses a challenge to conventional gain-scheduled flight controllers due to the widely spread aerodynamic coefficients. In addition, a wide range of uncertainties in disturbances must be accommodated by the control system. This paper presents the design of a roll channel controller for a non-axisymmetric reentry vehicle model using the trajectory linearization control (TLC) method. The dynamic equations of a moving mass system and roll control model are established using the Lagrange method. Nonlinear tracking and decoupling control by trajectory linearization can be viewed as the ideal gain-scheduling controller designed at every point along the flight trajectory. It provides robust stability and performance at all stages of the flight without adjusting controller gains. It is this "plug-and-play" feature that is highly preferred for developing, testing and routine operating of the re-entry vehicles. Although the controller is designed only for nominal aerodynamic coefficients, excellent performance is verified by simulation for wind disturbances and variations from -30% to +30% of the aerodynamic coefficients.

• 대한본초학회지
• /
• 제38권1호
• /
• pp.31-43
• /
• 2023

Objective : Alcoholic liver disease (ALD) is caused by excess alcohol intake. In the liver, alcohol breakdown results formation of toxic byproducts that lead to damage to tissue. This study is to investigate the therapeutic effects of Paeoniae Radix Alba and Puerariae Radix combination (PP) on ALD. Methods : PP was analyzed for polyphenolic compounds and free radical scavenging activity. ALD mouse model was induced by feeding ethanol and water (Control), silymarin (50 mg/kg), low-dose (PP: 100 mg/kg) or high-dose (PP: 200 mg/kg) was orally administrated to ALD mice for 14 days. The serum was assessed with levels of AST, ALT, total bilirubin, total cholesterol, and triglyceride. Liver tissues were evaluated for ROS levels, degree of liver damage and protein expression. Results : The 3:1 (Paeoniae Radix Alba:Puerariae Radix) ratio showed the best antioxidant values for the experiment. In ALD model, levels of AST, ALT, total bilirubin, total cholesterol, and triglyceride were significantly increased in the Control and the levels were decreased by treatment of PP. In addition, increased ROS, ONOO^- and MDA levels in the Control were reduced in the PP groups. Western blot analysis figured out that proteins related to ROS and cholesterol metabolism were higher in ALD than in PP-treated ALD. Antioxidant enzyme expression was low in the control group and increased by PP treatment. Conclusion : Our results suggest that PP has the potential to be a medicine in ALD in terms of regulating oxidative stress and adjusting lipid metabolism.

• 한국연초학회지
• /
• 제36권1호
• /
• pp.20-25
• /
• 2014

As part of a balanced testing battery, subchronic inhalation studies on rats are performed to ensure that proposed cigarette modifications do not increase the toxicity of smoke and to demonstrate any instances where a modification may actually contribute to harm reduction. For subchronic inhalation studies with aerosols, the OECD suggests an exposure regimen of 6 hours/day (OECD Guideline 413, 1981), but alternative regimens have also been published: 1 hour/day and $2{\times}1$ hour/day. The aim of this study was to validate a rodent nose-only exposure system for the assessment of inhalation toxicity of cigarette smoke. In this study, cigarette smoke exposure system is consisted of cigarette smoke generator, smoke concentration adjusting system, and 20-port nose-only exposure system. Male SD rats were exposed for 35 days ($2{\times}1$ hour/day) to 3R4F Reference cigarette smoke and analysed major monitoring items of OECD Gudeline 413. WTPM, was measured in the test atmosphere, respiratory function (Buxco Biosystems) during exposure, postexposure urinary exposure biomarkers and alveolar neutrophiles in BAL fluid (Day 35) were evaluated. Validation demonstrated steady WTPM ($257{\pm}20ug/L$, $502{\pm}27ug/L$) and spatial uniformity (<10%). Nose port temperature ($22{\sim}26^{\circ}C$ and RH (45~75%) were acceptable over 35 days. Reductions in respiratory rate and minute volume and increase in the neutrophiles in BALF and the urinary exposure biomarkers were observed cigarette smoke dose dependently. This validation and 35-day inhalation study has shown that the rodent nose-only exposure system may be useful in the inhalation toxicity assessment of cigarette smoke.

• 대한두개안면성형외과학회지
• /
• 제25권2호
• /
• pp.71-76
• /
• 2024

Background: The rising incidence of dialysis-dependent end-stage renal disease (ESRD) has underscored the need for collaboration between plastic surgeons and nephrologists, particularly concerning preoperative and postoperative management for facial reconstruction. This collaboration is essential due to a scarcity of comprehensive information in this domain. Methods: A study initiated in January 2015 involved 10 ESRD cases on dialysis undergoing Mohs micrographic surgery for facial skin cancer, followed by reconstructive surgery under general anesthesia. To ensure surgical safety, rigorous measures were enacted, encompassing laboratory testing, nephrology consultations, and preoperative dialysis admission. Throughout surgery, meticulous control was exercised over vital signs, electrolytes, bleeding risk, and pain management (excluding nonsteroidal anti-inflammatory drugs). Postoperative assessments included monitoring flap integrity, hematoma formation, infection, and cardiovascular risk through plasma creatinine levels. Results: Adherence to the proposed guidelines yielded a notable absence of postoperative wound complications. Postoperative plasma creatinine levels exhibited an average decrease of 1.10 mg/dL compared to preoperative levels, indicating improved renal function. Importantly, no cardiopulmonary complications or 30-day mortality were observed. In ESRD patients, creatinine levels decreased significantly postoperatively compared to the preoperative levels (p< 0.05), indicating favorable outcomes. Conclusion: The consistent application of guidelines for admission, anesthesia, and surgery yielded robust and stable outcomes across all patients. In particular, the findings support the importance of adjusting dialysis schedules. Despite the limited sample size in this study, these findings underscore the effectiveness of a collaborative and meticulous approach for plastic surgeons performing surgery on dialysis-dependent patients, ensuring successful outcomes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2508-2513
• /
• 2003

This paper presents a nuclear steam generator tube inspection/maintenance robot system. The robot assists in automatic non-destructive testing and the repair of nuclear steam generator tubes welded into a thick tube sheet that caps a hemispherical or quarter-sphere plenum which is a high-radiation area. For easy carriage and installation, the robot system consists of three separable parts: a manipulator, a water-chamber entering and leaving device for the manipulator and a manipulator base pose adjusting device. A software program to control and manage the robotic system has been developed on the NT based OS to increase the usability. The software program provides a robot installation function, a robot calibration function, a managing and arranging function for the eddy-current test, a real time 3-D graphic simulation function which offers remote reality to operators and so on. The image information acquired from the camera attached to the end-effecter is used to calibrate the end-effecter pose error and the time-delayed control algorithm is applied to calculate the optimal PID gain of the position controller. The developed robotic system has been tested in the Ulchin NPP type steam generator mockup in a laboratory.