• 한국주조공학회지
• /
• 제11권4호
• /
• pp.323-330
• /
• 1991

The relationships between the microstructure changes, retained austenite volume and elevated temperature tensile properties of Mo-Ni-Cu ADI corresponding to various austempering temperatures and time were investigated, After the $250^{\circ}C$ tensile test for the test piece austempered at $270^{\circ}C$ the accicular bainite structure was observed blunted under room temperature microscope. In the case of $370^{\circ}C$ austempering, the feathery bainite lath spacing was observed broadened. But after the $450^{\circ}C$ tensile test, bainitic features could not be observed. As the testing temperature increased, retained austenite volume tested at room temperature decreased. Especially, after the $450^{\circ}C$ tensile test retained austenite volume approached nearly to zero. A little higher tensile properties appeared at $250^{\circ}C$ testing than those at room temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.749-752
• /
• 2004

Unlike OLEDs, there is no lifetime testing procedure for TFTs. In this work, we have defined such a procedure and developed a method for the accelerated stress testing of TFT pixel circuits in a-Si AMOLED displays. The acceleration factors derived are based on high current and temperature stress, and can be used to significantly reduce the testing time required to guarantee a 20000-hour display backplane lifespan.

• 비파괴검사학회지
• /
• 제23권4호
• /
• pp.372-379
• /
• 2003

The problems encountered by ultrasonic testing of austenitic stainless steel weld joints are discussed in the paper. Due to low thermal conductivity and the occurrence of single phase between the melting point and the room temperature, coarse and oriented grains are formed in such weld metals more in thick sections. This leads to higher scattering at the grain boundaries and low signal to noise ratio, and extensive beam skewing. Experimental results to understand these problem are explained.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.85-90
• /
• 2010

절대온도(OK) 이상의 온도를 가지고 물체는 표면온도에 대응하는 적외선 파장대역에서 적외선 에너지를 방출하게 된다. 적외선열화상은 적외선 파장대역에 반응하는 검출기를 이용하여 검출된 적외선 량을 온도로 변환하고 사용자에게 적외선영상을 실시간으로 제공하는 비파괴검사 방법이다 원자력발전소의 배관은 부식, 피로 등으로 인해 두께가 얇아져 큰 사고로 이어질 수 있는 결함이 발생하므로 이를 위한 효율적인 비파괴검사 시스템이 요구되고 있다. 따라서 본 연구에서는 적외선열화상 카메라로 측정한 온도와 배관의 결함 깊이 및 크기와의 상관관계를 알아보고 이를 원자력발전소 배관에 적용하여 결함을 검출하는 연구를 수행하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.481-484
• /
• 2004

A form of measured temperature distribution to estimate condition of a electrical apparatus is a absolute reference for condition of the apparatus, time rate of transition, and difference between reference and currently temperature. Because passive thermography which has not injection of external thermal stimulation shows difference of temperature being on surface of a structure and temperature difference between the structure and back ground, the result could apply only to estimation or monitor for condition of terminal relaxation and overload related with temperature rising. However, a thermal flow in active thermography is differently generated by structure and condition of surface and subsurface. This paper presents the nondestructive testing using the properties and includes the results by heat injection and cooling to the apparatus. The buried discontinuity of subsurface could be detected by these techniques.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.303-306
• /
• 2009

High temperature solid oxide fuel cells (SOFCs) offer a clean, pollution-free technology to electrochemically generate electricity at high efficiencies. Solid oxide fuel cells in several different designs have been investigated; these include planar and tubular geometries. The tubular type cell is widely researched due to it have advantages about thermal expansion and sealing issues. Unfortunately, lab scale tubular cell for testing has thermal expansion and sealing problems. The previous Jig for lab scale tubular cell testing has many sealing problems. When we feed fuel gas to jig inlet, ceramic glue sealant has amount of gas expansion pressure, because temperature of feeding gas changes ambient temperature to high temperature ($700{\sim}900^{\circ}C$). Furthermore, when we carry out long time test, something like degradation test, crack of ceramic glue sealant due to weakness of mechanical properties can make stop working the test. Additionally, we reduce setting process for assembling, because micanite is not required drying or debinding process.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.66-71
• /
• 2017

Purpose: Polymer capacitors are known to have very high reliability as compared with liquid electrolytic capacitors, but their capacity has been reported to decrease in charge and discharge at low temperature. The purpose of this study to clarify these characteristics. Methods: In order to clarify these characteristics, charging-discharging tests were carried out for 200 hours with three different capacities and at 5 different temperature from $5^{\circ}C$ to $100^{\circ}C$. Results: As a result of the test, it was confirmed that the capacity of the polymer capacitor was decreased with higher capacity and lower temperature. Conclusion: Such a failure phenomenon was caused by the shrinkage and expansion characteristics of the polymer used therein, it is presumed that this failure phenomenon is due to the complex pore structure made by etching.

• 센서학회지
• /
• 제14권4호
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• 디지털융복합연구
• /
• 제14권5호
• /
• pp.317-323
• /
• 2016

본 논문에서는 아두이노를 이용하여 온도시험 장비의 오동작이 발생이 되면, 이를 검출하여 주변에 이 정보를 알려 고가의 정밀 전자제품의 훼손을 방지할 수 있는 시스템을 제안한다. 정밀 전자제품은 출고전에 온도시험 장비를 이용하여 극저온, 극고온 온도 상황하에서 정상동작 여부를 확인하게 된다. 만약 이 상황하에서 장비의 오동작이 발생되면 고가의 제품이 손상을 입어 폐기하는 경우가 생긴다. 이 시스템은 특히 야간에 담당자가 없이 자동으로 시험이 진행될 때에 온도시험 장비 내에 온도 센서를 부착하여 시험 대상인 제품이 실제로 받고 있는 온도 정보를 아두이노를 이용하여 실시간으로 감시한다. 만약 시험자가 설정한 온도구간을 벗어날 경우 아두이노의 출력단에서 High 신호를 출력하여 경보 구동회로가 온도시험 장비의 전원을 차단하고 야간 근무부서의 근무자에게 이 정보를 알려, 온도 시험 중 발생할 수 있는 극고온 혹은 극저온 상황에서 고가의 시험대상 제품의 훼손을 방지할 수 있도록 설계 및 구현을 하였다. 본 논문에서 제안한 시스템은 장비의 제조사에 관계없이 모든 온도시험 장비에 적용가능하고, 저비용으로 제작 가능하다.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.525-531
• /
• 2004

본 고는 적외선 열화상의 개념과 적외선열화상 측정윈리 및 카메라 셋팅을 기술하고 적외선열화강(IRT)에 의한 비파괴검사(NDT)의 활용 및 비파괴검사의 진단에 대하여 살펴보았다. 적외선 열화상은 주어진 표면을 따라 온도에 관련된 열패턴의 평가를 통한 정기적인 비접촉, 비파괴 시험의 수행으로 초기에 장비 고장의 예방이 가능하다. 진단 활용으로서, 열적으로 가열된 내부결함이 있는 블록에 대하여 적외선열화상을 이용한 열화상 패턴을 비파괴 기법으로 평가하고, 결함과 열화상패턴간의 특성을 분석하여 열화상 평가 기법에 대하여 논하였다.