• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.161-163
• /
• 1997

Heatcycle testing for aluminum connector is very important. But because of connecting or disconnecting the test circuit, measuring resistance is difficult. Also the previous measuring resistance instrument is analog type. So measuring method is difficult. And four measuring points for one test circuit cause difficulty in automation. In this paper we developed the automatic system for measuring resistance. Automation will allow more information to be gathered, which will lead to the connector aging process being better understood and controlled.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2348-2356
• /
• 1997

This paper describes a method of AAL(SSCOP) protocol conformance testing and its result analysis in ATM network. Terminal equipment(TE) that implements protocols for connecting ATM network shall be verified if appropriately implement by conformance testing. The protocol specifications and the testing methodology are recommended or standardized by international standardization organization(ITU-T, ISO, etc.). The ATM AAL (SSCOP) protocol which selected for describing conformance test procedure is standardized in ITU-T Q.2110 and ATM Forum UNI 3.1 which are same in contents. Also Testing standard like ATS for SSCOP is specified in ATM Forum 95-1459R2. Construction of conformance testing environment is necessary to coordinate in relations with standards, then testing must beexecuted at that environment and the results from the test system analyzed. For this, it is necessary to select any test case from standard for testing and to make ETS. The ETS is proted on the test system and conformance testing will execute on that system. Finally the result from the test system is to analyze. This conformance testing procedure is applicable to the same other test cases in SSCOP and protocols in any communcation networks.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.188-193
• /
• 2007

Tracking and erosion of Poly Methyl Methacrylate (PMMA) and the suppression mechanism of alumina trihydrate were investigated in the present study The conventional testing as IEC-60587 is widely used in surface aging measurement of outdoor insulator those testing can carry out very short time for Lab testing. Also IEC-60587 testing is able to offer the standard judgement of relative degradation level of outdoor HV system. Therefore it is very useful method compare to previous conventional tracking testing method, But surface discharges(SD) have very complex characteristics of discharge pattern so it is required estimation research to development of precise analysis method. In recent, the study of IRR-Camera is carrying out discover of temperature of power equipment through condition diagnosis and system development of degradation diagnosis. In this paper, SD occurred from IEC-60587 is measured with the surface temperature of weibull distribution in real time, the degradation grade of SD is analyzed through produced patterns in IEC-60587 using Infrared Radiation(IRR) camera.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.466-468
• /
• 2002

In order to newly define and specify the performance and the testing method of the high-voltage circuit breaker, IEC 62271-100 was published in May, 2001 and took place of IEC 60056 which had been used since 1987. This new standard intensifies the requirement and the test method of the circuit breaker and also domestic manufacturer makes progress the new product development. And, KERI also goes on the build-up project of short-circuit testing facilities for fulfilling the testing method requirements in new IEC 62271-100. This paper introduce the limiting method of short-circuit making current by controlling the time constant of dc component.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.2
• /
• pp.55-59
• /
• 2002

Parallel processing is able to be used effectively on computationally intense power system problems. But this technology is not still available is not only parallel computer but also parallel processing scheme. Testing these algorithms to ensure accuracy, and evaluation of their performance is also an issue. Although a significant amount of parallel algorithms of power system problem have been developed in last decade, actual testing on parallel computer architectures lies in the beginning stages because no clear cut paths. This paper presents Jacobian modeling method to supply the base being able to treat power flow by newton's method by the computer. This method is to assign and to compute teared blocks of sparse matrix at each parallel processors. The testing to insure accuracy of developed method have been done on serial computer by trying to simulate a parallel environment.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.174-179
• /
• 2016

In this paper, a novel full-aperture reflective null measuring method is proposed to detect the transmission wavefront of a conformal dome surface. An aspheric compensator is designed and placed behind the dome to reflect the aspheric testing wave back to the same path. To ensure the feasibility of this method, tolerance analysis is conducted, and guidance to assembly is given accordingly. The accuracy of this method is verified to be λ/30 (λ =3.39 μm) by Monte Carlo algorithm. In addition, the influence of different error factors, including the thickness error and decenter error of the dome, on the testing wavefront is analyzed. Simulation and experiment indicate that this method is practical and simple, and can measure the conformal domes precisely and comprehensively.

• Journal of Engineering Education Research
• /
• v.4 no.1
• /
• pp.57-78
• /
• 2001

Due to developments in information technology and ensuing changes in the concept of time and space, the significance of national boundaries has been weakened, bringing to attention the heightened competition among nations. In order to respond to these transformations, the Korean government is increasing its efforts to raise the authenticity of the National Technology Qualification System(NTQS) by closely linking NTQS testing method and procedure to practical knowledge and skills in the industry field. This initiative is based on the recognition that the human resources development is a crucial factor in determining a nation's competitiveness. This study aimed, first of all, to diagnose the problems directly and indirectly affecting the testing method in the current NTQS. And then, differentiated solutions according to grade and improvements in the testing infrastructure were suggested. The ultimate purpose was to provide a blueprint for enhancing national competitiveness through increased authenticity and efficiency of the NTQS. Research methods applied during this study include: the collection and review of qualification-related literature; a series of conferences with leading experts; interviews with vocational educators and researchers from qualification-related institutes; a survey of national qualification holders from a variety of professions and industries; and participatory observation at qualification exam centers. This research suggested policy recommendations as follows; First, measures to improve for testing method of professional engineer Second, measures to improve for testing method of Master craftsman Third, measures to improve for testing method of Engineer, Industrial Engineer, Craftsman Fourth, plans for the establishment of operation system for a computerized testing Fifth, institutional perspective on establishing qualification infrastructure Sixth, operational perspective on establishing qualification infrastructure

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.587-591
• /
• 2012

Review of practical vibration test methods those applied in various industrial fields - such as automotive industry, electrics and electronics industry, defense industry and aerospace industry - is described on this paper. Swept sine test, random vibration test and advanced vibration techniques are explained according to their parametric values and also application fields of each test method are suggested by the characteristic of each method. For more proper application of each test method, standardized test specifications should be always reviewed and revised according to the transition of environmental factors.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.293-301
• /
• 2009

Analytical results of a fixed concentration of Pb, Cd and Cr in the synthetic copper standard solution (RMs) for using the matrix no matched standard calibration curve at various wavelength by ICP showed that accuracy (140 $\sim$ 1,070% in case of Pb) is very poor at all wavelengths because of the Cu matrix effect. Analytical results of a fixed concentration of Pb, Cd and Cr in the different concentration solutions of Cu showed that found values were on the increase or decrease as the rate of a regular equation as the concentration of Cu was increased. Accuracies by the Cu matching method in the analysis of Pb, Cd and Cr in the synthetic copper standard solution (RMs) were higher than 99.9%.

• Journal of The Korean Association For Science Education
• /
• v.28 no.6
• /
• pp.664-674
• /
• 2008

The purpose of this study was to analyze the effects of the teaching and learning programs for science teachers' scientific hypothesis testing-method invention. Subjects were 30 secondary school science teachers. The potato juice task was administered to the subjects before and after instructional treatments. The four-step strategy including the steps of identifying factors, identifying variables, selecting variables and inventing methods, was applied to the development of the teaching and learning programs for the science teachers. The programs were developed by 6 experts through the R&D method. The results of this study revealed that the number and elaborateness of science teachers' scientific hypothesis testing-methods increased after the instructional treatments. The testing ability of testing-methods invented by science teachers in the posttest was stronger than the one of the methods invented in the pretest. This study also discussed the implications of these findings for teaching and learning in science education.