• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.312-316
• /
• 2015

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.3
• /
• pp.166-171
• /
• 2011

PURPOSE. The purpose of this study is to evaluate and compare the shear bond strength of the gingiva-colored composite resin and the tooth-colored composite resin to porcelain, metal and zirconia. MATERIALS AND METHODS. Sixty cylindrical specimens were fabricated and divided into the following 6 groups (Group 1-W: tooth-colored composite bonded to porcelain, Group 1-P: gingiva-colored composite bonded to porcelain, Group 2-W: tooth-colored composite bonded to base metal, Group 2-P: gingiva-colored composite bonded to base metal, Group 3-W: tooth-colored composite bonded to zirconia, Group 3-P: gingiva-colored composite bonded to zirconia). The shear bond strength was measured with a universal testing machine after thermocycling and the failure mode was noted. All data were analyzed using the two-way analysis of variance test and the Bonferroni post-hoc test at a significance level of 0.05. RESULTS. The mean shear bond strength values in MPa were 12.39, 13.42, 8.78, 7.98, 4.64 and 3.74 for Group 1-W, 1-P, 2-W, 2-P, 3-W and 3-P, respectively. The difference between the two kinds of composite resin was not significant. The shear bond strength of Group 1 was the highest and that of Group 3 was the lowest. The differences among Group 1, 2 and 3 were all significant (P<.05). CONCLUSION. The shear bond strength of the gingiva-colored composite was not less than that of the tooth-colored composite. Thus, repairing or fabricating ceramic restorations using the gingiva-colored composite resin can be regarded as a practical method. Especially, the prognosis would be fine when applied on porcelain surfaces.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1087-1092
• /
• 2003

As an experimental reference population, crosses between Korean native pig and Landraces were established and information on growth traits was recorded. Animals were genotyped for 24 microsatellite markers covering chromosomes 2, 6, and 7 for partial-genome scan to identify chromosomal regions that have effects on growth traits. quantitative trait loci (QTL) effects were estimated using interval mapping by the regression method under the line cross models with a test for imprinting effects. For test of presence of QTL, chromosome-wide and single position significance thresholds were estimated by permutation test and normal significance threshold for the imprinting test were derived. For tests against the Mendelian model, additive and dominance coefficients were permuted within individuals. Thresholds (5% chromosome-wide) against the no-QTL model for the analyzed traits ranged from 4.57 to 4.99 for the Mendelian model and from 4.14 to 4.67 for the imprinting model, respectively. Partial-genome scan revealed significant evidence for 4 QTL affecting growth traits, and 2 out of the 4 QTLs were imprinted. This study demonstrated that testing for imprinting should become a standard procedure to unravel the genetic control of multi-factorial traits. The models and tests developed in this study allowed the detection and evaluation of imprinted QTL.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.8
• /
• pp.3383-3389
• /
• 2014

Background: Prostate cancer is rapidly increasing in Korea and professional societies have requested adding prostate specific antigen (PSA) testing to the National Cancer Screening Program (NCSP), but this started a controversy in Korea and neutral evidence on this issue is required more than ever. The purpose of this study was to provide economic evidence to the decision makers of the NCSP. Materials and Methods: A cost-utility analysis was performed on the adoption of PSA screening program among men aged 50-74-years in Korea from the healthcare system perspective. Several data sources were used for the cost-utility analysis, including general health screening data, the Korea Central Cancer Registry, national insurance claims data, and cause of mortality from the National Statistical Office. To solicit the utility index of prostate cancer, a face-to-face interview for typical men aged 40 to 69 was conducted using a Time-Trade Off method. Results: As a result, the increase of effectiveness was estimated to be very low, when adopting PSA screening, and the incremental cost effectiveness ratio (ICER) was analyzed as about 94 million KRW. Sensitivity analyses were performed on the incidence rate, screening rate, cancer stage distribution, utility index, and treatment costs but the results were consistent with the base analysis. Conclusions: Under Korean circumstances with a relatively low incidence rate of prostate cancer, PSA screening is not cost-effective. Therefore, we conclude that adopting national prostate cancer screening would not be beneficial until further evidence is provided in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1746-1750
• /
• 2004

The PBM ${BioSign}^{TM}$ Salmonella (PBMS) test kit based on an mmunochromatographic method was evaluated for the screening of Salmonella spp. in pure cultures, and 80, 15, and 10 artificially and naturally contaminated, and negative controlled food samples, respectively. The PBMS test involves presumptive qualitative procedures, detecting the presence of Salmonella spp. in foods within 26 h total testing period and allowing the user to release negative products 70 h earlier than the conventional methods. The PBMS test using Buffered Peptone Water and Rappaport-Vassiliadis broth was evaluated for 10 different food types for various Salmonella spp. It showed detection limits of 1 to 25 colony forming units (CFU)/25 g. No cross-reaction was observed, particularly to other gramnegative bacteria. These results indicate the PBMS test is a rapid and inexpensive procedure for the screening of Salmonella spp. present at low concentrations (1 to 25 CFU/25 g) in foods.

• CELLMED
• /
• v.10 no.4
• /
• pp.30.1-30.4
• /
• 2020

Background: Tiryaq-e-arba is a polyherbal Unani antidote/antivenom formulation used in the management of poisoning due to snake bite, scorpion bite as well as in cold poisons since time immemorial. Objectives: Tiryaq-e-arba was not evaluated scientifically before this study carried out, therefore it was studied for antivenom activity by testing on plasma fibrinogen level in Russell's Viper envenomation in rabbits. Material &Methods: The anti-venom activity of the test drug was studied by observing its effect on plasma fibrinogen level in Russell's Viper envenomation in rabbits by the method of Netelson. Results: The plasma fibrinogen level was found to be 171±665.04 mg/100 ml of blood, 36.18±1.12 mg/100 ml of blood, 33.14±0.52 mg/100 ml of blood and 17.9±1.65 mg/100 ml of blood at 0, 1, 3 and 6 hours respectively in control animals while in the test animal it was found to be 157.13±3.44 mg/100 ml of blood, 41.13±2.69 mg/100 ml of blood, 62.09±1.65 mg/100 ml of blood and 54.39±0.73 mg/100 ml of blood respectively. The test showed that though the plasma fibrinogen level in the test lower at 0 hour but it was greater in the control animals at 1, 3 and 6 hours. The increase in plasma fibrinogen level in the test animals at 3 and 6 hours was statistically significant (P<0.001). Conclusions: The finding of the present study was that Tiryaq-e-arba possesses antivenom activity which scientifically support the Unani claim that it is Dafe-Sumoom-al-Hevan (Antivenom or Antidote) and the use of this preparation in corresponding diseases.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.2063-2068
• /
• 2012

Aim: Liquid-based cytology is the most often used method for cervical cancer screening, but it is relatively insensitive and frequently gives equivocal results. Used as a complementary procedure, the high-risk human papillomavirus (HPV) DNA test is highly sensitive but not very specific. The human telomerase RNA gene (TERC) is the most often amplified oncogene that is observed in cervical precancerous lesions. We assessed genomic amplification of TERC in liquid-based cytological specimens to explore the optimal strategy of using this for cervical cancer screening. Methods: Six hundred and seventy-one residual cytological specimens were obtained from outpatients aged 25 to 64 years. The specimens were evaluated by the Digene Hybrid Capture 2 (HC2) HPV DNA test and fluorescence in situ hybridization (FISH) with a chromosome probe to TERC (3q26). Colposcopic examination and histological evaluation were performed where indicated. Results: The TERC positive rate was higher in the CIN2+ (CIN2, CIN3 and SCC) group than in the normal and CIN 1 groups (90.0% vs. 10.4%, p < 0.01). In comparison with the HC2 HPV DNA test, the TERC amplification test had lower sensitivity but higher specificity (90.0% vs. 100.0%, 89.6% vs. 44.0%, respectively). TERC amplification test used in conjunction with the HC2 HPV DNA test showed a combination of 90.0% sensitivity and 92.2% specificity. Conclusion: The TERC amplification test can be used to diagnose cervical precancerous lesions. TERC and HPV DNA co-testing shows an optimal combination of sensitivity and specificity for cervical cancer screening.

• Journal of The Korean Association of Information Education
• /
• v.8 no.2
• /
• pp.261-268
• /
• 2004

The Government has established the infrastructure for knowledge and information-oriented society, strengthening the ICT technology education. Although information knowledge ability of learners is prerequisite to educate ICT, but systematic educating courses and time for that are insufficient, and many difficulties have been pointed out. In order to solve such problems, this study developed Web-based computerized adaptive testing system using the item response theory. This system enables the learners to evaluate their own ICT knowledge abilities in their school or home by using familiar web interface and to perform supplementary or deepening study according to the results, and consequently, smooth education of ICT application will be achieved. In addition, this system will be a very effective method for the elementary/middle/high-school ICT knowledge ability certification system.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.569-582
• /
• 2005

As information and business communication via Internet are growing up, web-based software is wide spread and more important on the viewpoint of software qualify than stand-alone. Research on verification of web content links and web-based Program was tried, but has short on covering various types of web based software and making experiments to be applied in real testing practice. This paper suggests a modeling technique to be applied to dynamic and various types of web-based software. First, it identifies each elements consisting of web-based software and then construct a model of Object Control Flow Graph and Object Relationship Diagram. We can generate test cases covering all test paths of ORD or invoking key points test route. Suggested modeling method and test case selection technique are verified by applying five types of web-based software and compared with other web-based test techniques.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.82-86
• /
• 2016

This paper proposes a method for the immobilization of motorbike brakes in conjunction with near-field communication (NFC) technology in order to meet the increasing demand for security and convenience of motorbike drivers. We thought about the concept of wireless key, NFC security devices and automatic solenoid valve for setting the lock and unlock module. This paper propose the design and development of an innovative anti-theft alarm system for motorcycles using NFC smart devices based on RFID system, the basis of IoT and AES(advanced encryption standard) encryption Algorithm. The design concept is based on NFC communication strategy between the vehicle and owner. To do this concept, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.