• Korean Institute of Interior Design Journal
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2016

Street is the most fundamental component of city and place to promote diverse actions of people. Pedestrians gaze at various street environments. A visual gaze means that there are interesting elements and these elements need to be preferentially improved in the street environment improvement project. Therefore, this study aims to set up the priorities of street environment components by analyzing eye movements from a pedestrian perspective. In this study, street environment components were classified into road, street facility, building(facade) and sky and as street environment images, three "Streets of Youth" situated in Gwangbok-ro, Seomyeon and Busan University of Busan were selected. The experiment targeted 30 males and females in their twenties to forties. After setting the angle of sight through a calibration test, an eye-tracking experiment regarding the three images was conducted. Lastly, the subjects were asked to fill in questionnaires. The following three conclusions were obtained from the results of the eye-tracking experiment and the survey. First, building was the top priority of street environment components and it was followed by street facility, road and sky. Second, as components to be regarded as important, fast 'Sequence', many 'Fixation Counts' and 'Visit Counts', short 'Time to First Fixation' and long 'Fixation Duration' and 'Visit Duration' were preferred. Third, after voluntary eye movements, the subjects recognized the objects with the highest gaze frequency and the lowest gaze frequency.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.30-32
• /
• 2004

With 3-D vision measuring, camera calibration is necessary to calculate parameters accurately. Camera calibration was developed widely in two categories. The first establishes reference points in space, and the second uses a grid type frame and statistical method. But, the former has difficulty to setup reference points and the latter has low accuracy. In this paper we present an algorithm for camera calibration using perspective ratio of the grid type frame with different line widths. It can easily estimate camera calibration parameters such as lens distortion, focal length, scale factor, pose, orientations, and distance. The advantage of this algorithm is that it can estimate the distance of the object. Also, the proposed camera calibration method is possible estimate distance in dynamic environment such as autonomous navigation. To validate proposed method, we set up the experiments with a frame on rotator at a distance of 1, 2, 3, 4[m] from camera and rotate the frame from -60 to 60 degrees. Both computer simulation and real data have been used to test the proposed method and very good results have been obtained. We have investigated the distance error affected by scale factor or different line widths and experimentally found an average scale factor that includes the least distance error with each image. The average scale factor tends to fluctuate with small variation and makes distance error decrease. Compared with classical methods that use stereo camera or two or three orthogonal planes, the proposed method is easy to use and flexible. It advances camera calibration one more step from static environments to real world such as autonomous land vehicle use.

• Journal of the Korea Concrete Institute
• /
• v.23 no.4
• /
• pp.503-509
• /
• 2011

ECC is a micro-mechanically designed cementitious composite which exhibits tightly controlled crack width and strain hardening behavior in uniaxial tension while using a moderate amount of reinforcing fiber, typically less than 2% fiber volume fraction. Recently, a variety of applications of this material ranging from repair and retrofit of structures, cast-in-place structures, to precast structural elements requiring high ductility are developed. In the present study, a retrofitting method using ECC reinforced with high strength rebar was proposed to enhance load-carrying capacity and crack control performance of deteriorated reinforced concrete (RC) beams. Six beam specimens were designed and tested under a four-point loading setup. The flexural test revealed that load-carrying capacity and crack control performance were significantly enhanced by the use of ECC and high strength rebar. This result will be useful for practical field applications of the proposed retrofitting method.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.421-428
• /
• 2013

Voice over IP refers to technology that enables routing of voice conversations over the Internet or a TCP/IP network. VoIP communication costs cheaper than traditional analog phone. Phone calls can be made to anywhere / anyone: Both to VoIP numbers as well as people with normal phone numbers. VoIP protocol equipment available today follows the SIP standard. Older VoIP equipment though would follow H 323, MGCP, Megaco/H.248. A SIP server is the main component of an IP PBX, dealing with the setup of all SIP calls in the TCP/IP network. A SIP server is also referred to a Asterisk IP-PBX. A VoIP telephone, also known as a SIP phone or a softphone, allows the user to make phone calls to any softphone, mobile or PC by using App store. A VoIP telephone can be a simple software-based softphone. However, the SIP Server and the program is vulnerable to VoIP attacks. In this paper, eavesdropping attacks tested by using the Asterisk SIP server. Eavesdropping attacks and TLS security methods apply to VoIP system. TLS can be applied to determine whether the eavesdropping available for VoIP Environments.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1070-1081
• /
• 1996

In this research, a model was developed for estimating the queue length of vehicles, based on occupancy time of each vehicle collected by loop detectors which were setup at the upstream of urban street. The estimation model suggestes a method which minimizes architectural effects of the street, such as existence of pedestrian crossing, for future applications to the field. The estimation model suggested in this research was established based on real traffic data collected at up-stream detectors in Kangnam Subway station, Seoul, and the formula of the model is based on Multi-Polynomial equations. Consequence of the experiments showed that the model can adequately and in real-time mode measure length of the queue which were constructed at the 80 to 90 meters away from the upstream detectors. The estimation accuracy of the model was verified in statistical analysis conducted by regressing analysis and test results in real traffic situation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1399-1406
• /
• 2009

In the internet broadcast, efficient and scalable mechanism of multicast is needed for the communication between groups. Furthermore, Optimization of the multicast tree is required to improve the performance of overlay multicast. This optimization is well-known as NP-complete. If a node in the tree has limited out-degree, a user who wants to join the group has to find parent user who has already joined. In this paper, the users who want to join the group need to setup their level using delay test from source node. And then new users can find candidate parent nodes effectively using ACK-SEND approach and take proper position by comparing level. The closer node of the user to root node should be located in lower level. Also, even if a barrier is caused, fast recovery will be guaranteed using ACK-SEND approach. Through this, the newcomer node can fine their location in the multicast tree and join the group fast and effectively.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.421-426
• /
• 2011

This research was accomplished to assess dose effects on image quality at computed radiography (CR). The ultimate target of the research was finding optimized exposure that provides necessary image quality for the clinical chest diagnosis. Modulation transfer function (MTF), normalized noise power spectrum (NNPS), and Noise equivalent quanta (NEQ) corresponding to the different doses were measured for the assessment of image quality. The preparation of "edge test device" used in MTF measurement and experimental geometry setup were followed by the recommendations of International Electrotechnical Commission (IEC). The experimental results show the necessary image quality can be achieved even at a half of the automatic exposure control (AEC) setting dose for chest diagnosis. It means that the patient exposure can be reduced dramatically by using optimized dose.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.32-38
• /
• 2007

This paper represents a Doherty amplifier (DPA) with analog predistorter (PD) to improve the linearity of the DPA while preserving the high efficiency. A third-order PD cancels fifth-order intermodulation (IM5) as well as third-order intermodulation (IM3) components by their same phase difference in the PD and DPA. This is accomplished by independently controlling their phase by using the phase-controlled error generator in the PD. Also, we confirm the phase-control ability of the error generator experimentally with a simple and accurate phase measurement setup. For experimental verification, a third-order PD has been implemented and tested in a 180-W DPA at the wide-band code division multiple access (WCDMA) band of 2.11-2.17 GHz. Two-tone test results show that significant cancellation of IM3 and IM5 components can be obtained. For four-carrier WCDMA applications, significant adjacent channel leakage ratio (ACLR) improvement is achieved over a wide range of output power levels. This technique is cost-effective and convenient due to its simple structure, compact size, and three control parameters.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.294-301
• /
• 2017

PURPOSE. Temperature increase of $5.5^{\circ}C$ can cause damage or necrosis of the pulp. Increasing temperature can be caused not only by mechanical factors, e.g. grinding, but also by exothermic polymerization reactions of resin materials. The aim of this study was to evaluate influences of the form material on the intrapulpal temperature during the polymerization of different self-curing resin materials for temporary restorations. MATERIALS AND METHODS. 30 provisonal bridges were made of 5 resin materials: Prevision Temp (Pre), Protemp 4 (Pro), Luxatemp Star (Lux), Structure 3 (Str) and an experimental material (Exp). Moulds made of alginate (A) and of silicone (S) and vacuum formed moulds (V) were used to build 10 bridges each on a special experimental setup. The intrapulpal temperatures of three abutment teeth (a canine, a premolar, and a molar,) were measured during the polymerization every second under isothermal conditions. Comparisons of the maximum temperature ($T_{Max}$) and the time until the maximum temperature ($t_{TMax}$) were performed using ANOVA and Tukey Test. RESULTS. Using alginate as the mould material resulted in a cooling effect for every resin material. Using the vacuum formed mould, $T_{Max}$ increased significantly compared to alginate (P<.001) and silicone (P<.001). In groups Lux, Pro, and Pre, $t_{TMax}$ increased when the vacuum formed moulds were used. In groups Exp and Str, there was no influence of the mould material on $t_{TMax}$. CONCLUSION. All of the mould materials are suitable for clinical use if the intraoral application time does not exceed the manufacturer's instructions for the resin materials.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.3-10
• /
• 2013

This study, with a space of cafeteria for the object, selected adjective and space for space evaluation based on existing dissertations and experts' survey so as to analyze the perception features by adjective into perception types. At space evaluation, the purpose of visiting the cafeteria was setup for test. Analysis of what perceptual information on the space was acquired enables to set up any features at a space and the direction of designing. The approach through the evaluation of space perception assigning this kind of observing intentionality can be applied to emotion technique which connects a designer to customers. From this study, the following conclusion has been reached. Frist, the difference at perception type by gender is formality, which is higher with women than men. When it is considered that other types are identical, it can be seen that the formality is the perception type to decide the selection of gender and has the highest average value among all the three types. On the whole, men have the tendency for regarding spaciality as the most important, while women have that for looking upon formality as such. Second, to the question what element they would see first when visiting for conversation, men and women answered respectively that they would see partition (35.6%) and chairs (38.0%). Men had a very strong propensity for the element of area section(partition) supporting the activity of purpose and women regarded the element of behavior support(chair) carrying out the activity of purpose as important. Third, the analysis of deviance shown at the formality of perception type showed that men had dispersive selection at the process of selecting all adjectives and their features at the process of space perception were higher than spaciality and fancine.