• Title/Summary/Keyword: Test research

Search Result 38,171, Processing Time 0.079 seconds

A Study on Leaching Characteristics of $Cr^{6+}$ in Cement Grout Materials (시멘트 그라우트재에서 $Cr^{6+}$용출특성에 관한 연구)

  • 김동우;이재영;천병식
    • Journal of Soil and Groundwater Environment
    • /
    • v.8 no.2
    • /
    • pp.62-69
    • /
    • 2003
  • The aim of research is the evaluation of the $Cr^{6+}$ emission features of the liquid injection through emission experiments in varying conditions, based on a field-mixing ratio. The results showed that the content of $Cr^{6+}$ content in cement measured had an Ordinary Potland Cement (OPC) of 25.3 mg/kg, which constitute the largest portion among the other materials. Likewise, the emission experiment of homo-gel and sand-gel generally satisfied the standard of KSLT (Korea Standard Leaching Test) in waste of 1.5 mg/L, but in case of the standard of KSLT in soil the emission of OPC $Cr^{6+}$ of 4.85 mg/kg. These conditions is a little exceeded the criteria in the ‘Ga’ area in terms of Korea Soil Environmental Preservation Law. In addition, results generated by the mock-up injection facilities revealed that $Cr^{6+}$ emission increased as Water/Cement and injection pressure increased. At injection pressure higher than 4 kg/㎤, $Cr^{6+}$ emission exceeded the water preservation standard of 0.5 mg/L. Similarly, a pattern experiment of C $r^{6+}$ emission according to pH was conducted, in order to evaluate the $Cr^{6+}$ emission features of grout materials in leachate below pH 5 such as pH 4 acid rain or landfill. Results show that $Cr^{6+}$ emission dramatically increased in high acidic or basic state. It indicates that $Cr^{6+}$ emission will probably increase in an environment where grout materials are injected. On the other hand, concentration of leachate was determined in areas where grout materials are used. The results show that the concentration of emission in an ultra purity condition does not manifest intensity, and is affected in the OPC>MC>SC order. It means that the pollutants or $Cr^{6+}$ emission increases with decreasing concentration. As such, $Cr^{6+}$ emission will probably exceed the countermeasure criteria according to the types of gout materials. Similarly, high pressure or injection will cause increased $Cr^{6+}$ emission. Therefore, the selection of materials or mixing ratio should be considered in general as well as according to specific industries, based on the strength and pH of $Cr^{6+}$ emission.

Studies on Anisakis Type Larvae (Anisakis 형(型) 유충(幼蟲)에 관한 연구(硏究))

  • Lim, Jung Teck
    • Korean Journal of Veterinary Research
    • /
    • v.15 no.2
    • /
    • pp.293-307
    • /
    • 1975
  • As it has been known recently that anisakis type larvae harbouring in marine fishes are a causal agent of zoonosis to human and probably to land living mammal animals, attention was focused on the study on the larvae in an aspect of epidemiology or epizootiology. The present work was conducted from 1966 to 1975 for i) survey on the harbouring status of anisakis type larvae in marine fishes of this country, ii) observation on the response to the experimental infestation of the larvae to the pigs, in the reason that they could well fetid raw fish viscera occasionally containing the larvae as a high protein source of swine food, and iii) observation on the larval resistance and response to vermicidal agents for the purpose of prevention of the larval infection to the mammal animals. The data obtained in the studies were summarized as follows: 1. In the survey on the status of larvae harbouring in main species of marine fishes of this country, 15 species, a total of 1,940 fishes, were observed and the result was summarized in table 2. Average number of larvae, in upper rank of 5 out of all 15 species of fishes, were as highest as 156 larvae ranging 74 to 450 in Pseudosciaena manchurica (chamjogi), 54.5 ranging 15 to 240 in Trichiurus haumela (kalchi), 35.6 ranging 8 to 112 in Trachurus japonica (junggengi), 30.6 ranging 4 to 65 in Parapristipama trilineatum (benjari) and 20.5 ranging 3 to 48 in Nibea argentata (boguchi) respectively. In morphological observation, size of the larvae in the fishes were varied, ranging from 2 to 32mm long, and a tendency to larger size and number of larvae in the fishes, which were wider sea migration, higher age and lager bodily size, was observed The favorite places harbouring the larvae in fishes were mainly around the intraperitoneal viscera such as mesentery, omentum, liver, pyloric suspensory, fat tissue and cloaca, and rarely in body muscles of fish. Fishes heartily infested with the larvae showed stunted growth decreased egg formation and severe damage of liver. 2. In the experimental infestation of the larvae to normal pigs, as illustrated in table 3, a group with large dose of larvae (a total of 1,800 larvae, 300 larvae Per dose, twice in a dart for 3 days) showed acute clinical syndrome terminatine death with a week course, whereas two groups with less dose of larvae (a total of 180~360 larvae, 10 larvae per dose, at 5 days interval for 70~180 days) showed subclinical syndrome with remarkably stunted growth as. much as approximately one half of body size in contest to the control pigs. In the pathological findings, a group with large dose of larvae showed macroscopically larvae penetrating to the gastric wall with severe gastroenteritis, and histopathologically various acute lesions caused by active larvae penetration into the wall of stomach and interstine, whereas two groups with less dose of larvae showed chronic lesions such as hypertrophy and verminous granulomatous swelling of gastric wall, suggesting strongly the possibility of natural infestation of larvae to swine. 3. In the resistance of the larvae to the chemical solutions, the larvae tolerated for 2 days in 15 percent solution of sodium chloride and acetic acid, and for 7 days in 70 percent solution of ethyl alcohol. In the resistance to the temperature, the larvae died within 1 second at $62^{\circ}C$ and tolerated for 24 hours at $-3^{\circ}C$, 12 hours $-5^{\circ}C$ respectively. 4. For the experiment on the vermicidal effect to larvae, general vermicidal drugs such as Neguvon, Combantrin, antimony Potassium, piperazine adipate and piperazine dihydrochloride, oxidizer such as potassium permanganate and potassium chlorate, and dyes such as gentian violet and crystal violet were used, and among them, as illustrated in table 6, potassium permanganate was proved as the best. In the successive test for the practical use of potassium permanganate, vermicidal effect in seawater solution of potassium permanganate and common-water solution of potassium permanganate were compared, and then retested by dipping the fish viscera including the larvae into the two different solutions of potassium permanganate. The result through these tests indicated that 0.01 percent common water and sea-water solution of potassium permanganate could be apparently recommended as a preventive vermicidal solution, having 90 to 100 percent vermicidal effect by dipping for 12 to 24 hours even though sea-water solution of potassium permanganate had a tendency to slightly less effect than the common-water solution of potassium permanganate (Table 8).

  • PDF

Surgical Treatment of MDR Pulmonary Tuberculosis (다제내성 폐결핵의 수술적 치료)

  • Seo, Young-Jun;Park, Hoon;Park, Chang-Kwon;Keum, Dong-Yoon;Yoo, Young-Sun
    • Journal of Chest Surgery
    • /
    • v.36 no.11
    • /
    • pp.839-845
    • /
    • 2003
  • Background: Even today when chemotherapy has been established as a treatment for tuberculosis and the prevalence of tuberculosis is gradually decreasing, multi-drug resistance tuberculosis still results in poor treatment performance and lowered survival periods. This research sought to analyze the surgery of multi-drug resistance tuberculosis, and determine the usefulness and danger of surgery in connection with this disease. Material and Method: Starting from February 1990 to February 2002, retrospective surveys were conducted targeted at 21 cases involving 20 patients who underwent surgery due to multi-drug resistance tuberculosis. The survey included 14 males cases and 6 females cases with the age averaging 42.8$\pm$12.1 years. 10.3$\pm$7.6 years on average passed after patients were initially diagnosed with tuberculosis. 13 patients (65%) tested positive in the pre-operative sputum AFB test, and all showed resistance against an average of 3.5 anti-tuberculosis agents including INH and RFP. Pre-operative radiologic examinations revealed cavitary lesions in 15 patients (75%), and three patients had lesions in the both lung fields, with the major lesions existing in the unilateral area. 13 patients (75%) failed negative conversion with medical treatment, while two patients (10%) with recurrent hemoptysis and five patients (25%) with lesions involving high recurrence-rate received the operation. Operations included nine cases (40%) of pneumonectomy, nine cases (45%) of lobectomy, and three cases of lobectomy with segmentectomy. The average follow-up period of patients stood at 23 months. Result: There was no post-operative death, and found were a total of eleven cases involving complications were found: three cases of long-term air leakage, three cases of bleeding requiring re-operation, two cases of empyemas due to broncho-pleural fistula, and one case of atelectasis, wound infection and chest wall fistula each. Eleven cases (85%) of negative conversion were completed immediately after the operation, and two cases failed negative conversion. Eleven months after the operation, the disease recurred in one case of negative conversion patients, and the patient was cured by completion pneumonectomy. Conclusion: If patients' lung function was sufficient and appropriate resection was possible, multi-drug resistance tuberculosis could achieve high-rate negative conversion and cure using combination of surgical and medical treatment, and also there were not many serious complications.

Morphological and Growth Characteristics of Collected Coix lacryma-jopbi mayuen STAF in Korea (율무 국내수집종(國內蒐集種)의 형태(形態) 및 생육(生育) 특성(特性))

  • Lee, Hyo-Sung;Kim, Ki-Jung;Lee, Eun-Sub;Song, Byung-Yurl
    • Korean Journal of Medicinal Crop Science
    • /
    • v.5 no.1
    • /
    • pp.56-61
    • /
    • 1997
  • This research was conducted to investigate morpological and growth characteristics of 358 Coix lacryma-jopbi mayuen STAF collected in Korea. The test collections contained 76% medium wide-type leaf, 59% medium size-type seed, 34% large size-type seed, 70% elliptical-type shell, 50% brown shell color, 92% low stem color and hardness of seed coat averaged $3.4kg/cm^2$ with the range of $1.1{\sim}18.7kg/cm^2$. 24% adaptable plant height ranged from 156cm to 170cm, days to heading after seeding averaged 83.2% with the range of $74{\sim}94$ days, early maturating varietes was 24.9% below 80 days. Rate to leaf blight 48.5% with the range of $9{\sim}92%$ and rate to stem borer averaged 8% with the range of $0{\sim}17%$. The weight of 1000 seeds showed positive correlation with days to flowering and plant height and number of seeds per plant showed positive corrleation with percentage of ripness, but weight of 1000 seeds showed negative correlation with occurrence of leaf blight and stem borer plant. Therefore we are expecting useful germplasm and selectable index for effective breeding.

  • PDF

Development of Dust Recycling System and Dust Cleaner in Pipe during Vitrification of Simulated Non-Radioactive Waste (모의 비방사성폐기물의 유리화시 발생 분진의 재순환처리장치 및 배관 내 침적분진에 의한 막힘 방지용 제진장치의 개발)

  • Choi Jong-Seo;You Young-Hwan;Park Seung-Chul;Choi Seok-Mo;Hwang Tae-Won;Shin Sang-Woon
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2005.06a
    • /
    • pp.110-120
    • /
    • 2005
  • For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

  • PDF

Antibacterial and Antimutagenic Effects of Sweetpotato Tips Extract (고구마 끝순 추출물의 항균 및 항돌연변이 효과)

  • Lee, Joon-Seol;Shin, Mee-Jin;Park, Yang-Kyun;Ahn, Young-Sup;Chung, Mi-Nam;Kim, Hag-Sin;Kim, Jeong-Mok
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.52 no.3
    • /
    • pp.303-310
    • /
    • 2007
  • Sweetpotato shoot tops (leaves, tips and petioles) are known to be very useful parts as vegetables because of their high nutritive values and great biomass yield. In this study, the phenolic compound contents, antibacterial activity, mutagenic activity, and antimutagenic activity were investigated in sweetpotato tips that were 10-15cm of shoot top including stems, petioles and tender leaves after sprout of storage roots. The study was done by extracting sweetpotato tips with 80% ethanol and the ethanol fraction was re-extracted with hexane, chloroform, ethyl acetate, butanol and water. In ethyl acetate and butanol fractions, total phenolic compounds contained 95. 6mg/g extract and 69.3 mg/g extract, respectively, The antibacterial activity was measured using the paper disk method with concentrations of 1, 2, 5 and 10 mg/disk of butanol and ethyl acetate fractions against L. monocytogenes and S. Typhimurium strains. Higher doses of solvent extracts showed the higher antibacterial activities. In addition, 5, 10 and 20 mg/mL of the extracts were tested to determine the antibacterial activity in liquid culture. The sweetpotato leaf extract by ethyl acetate showed 1 log reduction compared to control after 24 hrs on Listeria monocytogenes, but 20 mg/ml of butanol extract completely inhibited the growth of the pathogen after 12 hrs. The extracts from ethyl acetate or butanol on Salmonella Typhimurium did less than 1 log reduction during cultivation compared to control. The numbers of S. Typhimirium TA98 and TA100 revertant colonies were 29-33 and 159-188 CFU/plate, respectively, indicating that solvent extracts were no mutagenic activity. The antimutagenic test was performed by adding direct mutagen 2-NF and MMS, and butanol and ethyl acetate showed antimutagenic effect. Thus, this study showed that sweetpotato tips had high phenolic contents and both antimicrobiol and antimutagenic properties. Sweetpotato tips would be good nutritive source because of their high nutrient content without any toxicity in consuming.

Shipborne Mobile LiDAR(Light Detection and Ranging) System for the Monitoring of Coastal Changes (해안지형 모니터링을 위한 해상모바일라이다 지형 측정 시스템 구축)

  • Kim, ChangHwan;Kim, HyunWook;Kang, GilMo;Kim, GiYoung;Kim, WonHyuck;Park, ChanHong;Do, JongDae;Lee, MyoungHoon;Choi, SoonYoung;Park, HyeonYeong
    • Economic and Environmental Geology
    • /
    • v.49 no.4
    • /
    • pp.281-290
    • /
    • 2016
  • Coastal areas, used as human utilization areas like leisure space, medical care, ports and power plants, etc., are regions that are continuously changing and interconnected with oceans and land. Regular monitoring of coastal changes is essential at key locations with such volatility. But the survey method of terrestial LiDAR(Light Detection and Ranging) system has much time consuming and many restrictions. For effective monitoring coastal changes, KIOST(Korea Institute of Ocean Science & Technology) has constructed a shipborne mobile LiDAR system. The shipborne mobile LiDAR system, installed in a research vessel, comprised a land based LiDAR(RIEGL LMS-420i), an IMU(MAGUS Inertial+), a RTKGNSS(LEICA GS15 GS25), and a fixed platform. The shipborne mobile LiDAR system is much more effective than a land based LiDAR system in the measuring of fore shore areas without shadow zone. Because the vessel with the shipborne mobile LiDAR system is continuously moved along the shoreline, it is possible to efficiently survey a large area in a relatively short time. We conducted test measurements in the Anmok-Songjung beach around the Gangneung port. Effective monitoring of the changes using the constructed shipborne mobile LiDAR system for seriously eroded coastal areas will be able to contribute to coastal erosion management and response.

A Preliminary Study for Expending of Hospital-Based Home Health Care Coverage - Focused on Car Accident Inpatients Who has the Compensation Insurance - (병원중심 가정간호관리대상 범위 확대를 위한 기초연구(II) - 자동차보험가입 입원환자를 대상으로 -)

  • Park, Eun-Sook;Lee, Sook-Ja;Park, Young-Ju;Ryu, Ho-Sihn
    • Journal of Home Health Care Nursing
    • /
    • v.7 no.1
    • /
    • pp.58-72
    • /
    • 2000
  • This study was an attempt to encourage the development of a rehabilitation delivery system and programs as a substitute service for hospitalization on the case of car accident patients, such as hospital based home health care nursing services. Various substitute services for hospitalization are required to curtail the length of stay for inpatients who were hospitalized with car accident compensation insurance. It focused on developing an estimation an early discharge day for car accident inpatients based on detailed statements of treatment for 111 inpatients who were hospitalized at the General Hospital in 1997. This study had four specific purposes as follows. First. to find out the utilization of medical services. Second, to estimate the time of early discharge and income increasing effect based on early discharge for those patients. Third, to identify the factors affecting total medical expenditure and the length of stay for those inpatients. Forth, to figure out the need of utilizing home health care nursing service for accident patients. In order to analyze the length of stay and medical expenditure for inpatients who were hospitalized due to car accidents, the authors conducted micro- and macro-analysis of medical and medical expenditure records. Micro-analysis was done by nominal group discussion of 4 expertise with the critical criteria, such as a decrease in the amount of treatment after surgery, treatments, tests, drugs and changes in the test consistency, drug methods, vital signs, start of ROM exercise, doctor's order, patient's outside visiting ability, and stable conditions. In addition to identifying variables affecting medical expenditure, and the length of stay and income effect due to early discharge day, the data was analyzed with a multiple regression analysis and linear regression analysis model by SPSS-PC for windows and Excell program. Results of this study were as follows. First. the mean length of stay was 50.3 days. whereas the mean length of stay due to early discharge was 34.3 days at the hospital. The estimation of time of early discharge depended on the length of stay. The longer the length of stay, the longer the length of time of early discharge : for instance a length of stay under 10 days was estimated as correlating to a mean length of stay of 6.6 days and early discharge of 6.5. The mean length of stay was 217.4 days and the time of early discharge was 110.1 respectively. The mean medical expenditure per day was found to be 169.085 Won and the mean medical expenditure per day showed negative linear trends according to the length of stay at the hospital. The estimation results of the income effect due to being discharged 16 days early was around 2,244,000 won per bed. However. this sum does not represent the real benefits resulting from early discharge, but rather the income increasing amount without considering medical prime cost in the general hospital. Therefore, further analysis is required on the cost containments and benefits as turn over rate per bed as the medical prime costs. The length of stay was most significant and was positive to the total medical expenditure, as expected. Surgery and patient's residential area was also an important variable in explaining medical expenditure. The level of complications was the most significant variable in explaining the length of stay. There was a high level for need a home health care nursing service which further supports early discharge for accident patients. In addition, when the patient was discharged. they needed follow up care for complications suffered during the car accident. $86.8\%$ of discharged patients responded that they needed home health services after early discharge. From these research findings, the following suggestions have been drawn. Strategies on a health care delivery system must be developed in order to focus on the consumer's needs and being planned for 21 century health policy in Korea. Community based intermediate facilities or home health care should be developed for rehabilitation services as a substitute for hospitalization in order to shorten the length of stay would be. A hospital based home health care nursing service. it would be available immediately to utilize by patients who want rehabilitation services as a substitute for hospitalization with the cooperation of car insurance companies.

  • PDF

Air Sampling and Isotope Analyses of Water Vapor and CO2 using Multi-Level Profile System (다중연직농도시스템(Multi-Level Profile System)을 이용한 수증기와 이산화탄소 시료채취 및 안정동위원소 조성 분석)

  • Lee, Dong-Ho;Kim, Su-Jin;Cheon, Jung-Hwa;Kim, Joon
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.12 no.4
    • /
    • pp.277-288
    • /
    • 2010
  • The multi-level $H_2O/CO_2$ profile system has been widely used to quantify the storage and advection effects on energy and mass fluxes measured by eddy covariance systems. In this study, we expanded the utility of the profile system by accommodating air sampling devices for isotope analyses of water vapor and $CO_2$. A pre-evacuated 2L glass flask was connected to the discharge of an Infrared Gas Analyzer (IRGA) of the profile system so that airs with known concentration of $H_2O$ and $CO_2$ can be sampled. To test the performance of this sampling system, we sampled airs from 8 levels (from 0.1 to 40 m) at the KoFlux tower of Gwangneung deciduous forest, Korea. Air samples in the 2L flask were separated into its component gases and pure $H_2O$ and $CO_2$ were extracted by using a vacuum extraction line. This novel technique successfully produced vertical profiles of ${\delta}D$ of $H_2O$ and ${\delta}^{13}C$ of $CO_2$ in a mature forest, and estimated ${\delta}D$ of evapotranspiration (${\delta}D_{ET}$) and ${\delta}^{13}C$ of $CO_2$ from ecosystem respiration (${\delta}^{13}C_{resp}$) by using Keeling plots. While technical improvement is still required in various aspects, our sampling system has two major advantages over other proposed techniques. First, it is cost effective since our system uses the existing structure of the profile system. Second, both $CO_2$ and $H_2O$ can be sampled simultaneously so that net ecosystem exchange of $H_2O$ and $CO_2$ can be partitioned at the same temporal resolution, which will improve our understanding of the coupling between water and carbon cycles in terrestrial ecosystems.

Research of Statistical Model for Genetic Evaluation of Hanwoo Carcass Traits (한우 도체형질의 유전능력평가를 위한 통계모형 탐색)

  • Koo, Yang-Mo;Kim, Si-Dong;Kim, Jung-Il;Song, Chi-Eun;Lee, Ki-Hwan;Jeoung, Yeoung-Ho;Lee, Jae-Youn;Jang, Hyun-Gi;Park, Byoung-Ho;Choi, Te-Jong;Cho, Kwang-Hyun;Lee, Seung-Soo;Lee, Jung-Gyu;Kim, Hyo-Sun
    • Journal of Animal Science and Technology
    • /
    • v.53 no.4
    • /
    • pp.283-288
    • /
    • 2011
  • This study was conducted to study the environment effects on live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score, which are the carcass traits of Hanwoo, based on the estimates and all the possible regression for the selection of variable and significance test for 231,382 heads that underwent the carcass measurements. The average and standard deviation for the live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score were 654.79${\pm}$91.61 kg, 362.30${\pm}$67.15 kg, 59.52${\pm}$0.03%, 81.79${\pm}$12.21 $cm^2$, 11.39${\pm}$5.40 mm, 4.38${\pm}$2.29, respectively. The live weight, carcass weight, dressing percentage, eye muscle area, backfat thickness, and marbling score for cow were 532.79${\pm}$78.38 kg, 313.40${\pm}$44.90 kg, 56.50${\pm}$0.03%, 75.24${\pm}$10.69 $cm^2$, 11.82${\pm}$5.10 mm, 4.30${\pm}$2.06, respectively, while for bull were 619.74${\pm}$93.27 kg, 376.89${\pm}$48.62 kg, 58.61${\pm}$0.02%, 85.61${\pm}$10.46 $cm^2$, 5.64${\pm}$2.71 mm, 1.41${\pm}$0.83, respectively, and for steer were 681.78${\pm}$70.72 kg, 415.23${\pm}$49.43 kg, 60.19${\pm}$0.02%, 88.29${\pm}$10.27 $cm^2$, 12.71${\pm}$5.23 mm, 5.42${\pm}$1.99, respectively. In the environmental variables selection based on the variables selection method, the examination by carcass traits suggested that the most appropriate model could be determined when five variables were selected for the live weight, carcass weight, dressing percentage, eye muscle area, and four variables for backfat thickness, and marbling score. When they were considered at a time altogether based on multiple traits, it was deemed to be desirable to insert all five variables into the variables for analysis. In addition, high significance was found by carcass traits.