• Title/Summary/Keyword: Test for verifying

Search Result 499, Processing Time 0.03 seconds

Development of an Electronic Simulator for Efficiency Improvement to Verify Electro-Hydraulic Servo Controllers in an Examination Set-up (점검환경에서 유압서보제어기 검증효율을 개선하기 위한 유압식 구동장치 시뮬레이터 개발)

  • Han, Seung Chul
    • Journal of Drive and Control
    • /
    • v.14 no.3
    • /
    • pp.50-57
    • /
    • 2017
  • Recently, methods of verification for electro-hydraulic servo controllers are various and the required number of testing controllers is continuously increasing in some specific systems. In this study, a PCB-based electronic simulator of hydraulic actuators is designed and developed to simplify test set-up for controllers and to facilitate alteration for characteristics of the simulator. Several features to reduce required time and manpower for verifying controllers are described. Especially, the simulator is considerably efficient to examine some controllers for different hydraulic actuators in a test. Response characteristics of the simulator are compared with those of real actuators to demonstrate validity of this method. Results reveal utilizing the designed simulator for inspecting controllers is equally effective as using hydraulic actuators.

Simulation of Rotary Forging Process by Model Material Technique (모델재를 이용한 회전단조 공정의 시뮬레이션)

  • 윤덕재;최석우;나경환;김종호
    • Transactions of Materials Processing
    • /
    • v.4 no.1
    • /
    • pp.9-16
    • /
    • 1995
  • Model material technique, which requires only the small space of experimental set-up and low cost for experiment, is used to estimate the deformed profile and the forging load in rotary forging. The materials and working conditions are determined to satisfy the similitude conditions between the model test and the prototype test. The model material of the so-called plasticine and the mild steel are chosen as specimens, and they represent almost the same value of strain gardening exponent in the stress-strain relationship. Lubricant in the model test is also carefully selected so that it gives the same frictional conditions at the tool-specimen interface. Experiments for two kinds of specimens are carried out in each testing equipment at room temperatue. From the experiments the deformed dimensions and the forging loads are measured and compared with each other by using the simulation coefficients. It is shown that there are good agreements between the model test and the prototype test. Finally, for verifying the availability of the model material technique this mathod is applied to forging of bevel gear product. the good result is obained which can demonstrate that the model material technique is very efficent for estimating or developing a new process.

  • PDF

An Angle-Binder Drawbead Simulator for Measuring Drawbead Forces on Inclined Binder Surface (경사진 바인더면의 드로우비드력을 측정하기 위한 모의실험장치)

  • Yang, W.H.;Choi, K.Y.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2009.05a
    • /
    • pp.180-184
    • /
    • 2009
  • A novel set of experimental test tooling for measuring pulling and holding forces for drawbeads on binders inclined at a wide range of angles is introduced. A mechanical design featuring a single load cell, a male-female draw bead set, translation and rotation degrees of freedom, and a screw-driven clamping system has been incorporated into a standard tensile test machine. On a real time basis, restraining and holding force data with respect to draw-in displacement may be directly downloaded into a PC for data processing. The proposed experimental system represents a significant breakthrough in drawbead simulation technology due to its relatively low cost, clever design, and versatility. The system is shown to yield excellent experimental data suitable for verifying theory and numerical model predictions.

  • PDF

Improving Reuse of Test Strategy based on ISO/IEC Standards

  • Min, Kyeongsic;Lee, Jung-Won;Lee, Byungjeong
    • Journal of Internet Computing and Services
    • /
    • v.20 no.6
    • /
    • pp.37-46
    • /
    • 2019
  • A test plan is a high level document detailing objectives, processes, schedules and so on for verifying a developed software. And a test strategy, a component of a test plan, is about how to test software products to guarantee its quality and find bugs in the software in advance. Therefore, establishing effective and suitable test strategies is important for elaborating test processes. However, these tasks are difficult for project managers who write a test plan if they were not trained well in software test processes. And mis-designed test strategies will also mislead entire testing behaviors that testers would do. As a result, there would be a low quality software product in the end. To solve this problem, we propose a new test strategy reuse technique in this paper. By utilizing test plans of already completed software development projects, we lead test planer to reuse suitable and effective test strategies which were used in previous projects. To do so, we evaluate existing test strategies by utilizing ISO/IEC 25010 quality model for evaluating the suitability of test strategies and also use effectiveness metrics for test strategies. And from these evaluations, we predict completeness of new test plan that is written by reused test strategies. It can help the project manager to write an appropriate test plan for the quality characteristics which are selected as objectives for testing and software product. We show the possibility of our approach by implementing a prototype into the existing framework in a case study.

A Test Bench with Six Degrees of Freedom of Motion For Development of Small Quadrotor Drones (소형 쿼드로터 드론 개발을 위한 6 자유도 운동 실험 장치)

  • Jin, Jaehyun;Jo, Jin-Hee
    • Journal of Aerospace System Engineering
    • /
    • v.11 no.1
    • /
    • pp.41-46
    • /
    • 2017
  • A new test bench for small multi-rotor type drones has been developed. Six degrees of freedom (DOF) motion is possible due to a ball bushing, wheels, and rotating plates. An FPGA (field programmable gate array) based controller, that supports realtime parallel processing, is used to measure attitude with an accelerometer and a gyro to adjust motor speed. Several tests were performed to check the operational properties of the test bench and the controller. The results show that this test bench is proper for verifying controllers and the control methods of small multi-rotor drones.

A study on the performance test and acoustic design of interference type noise reduction device for railway noise (철도소음 저감을 위한 간섭형 방음장치 음향 설계 및 성능시험에 관한 연구)

  • Cho, Jun-Ho;Koh, Hyo-In
    • Journal of Environmental Impact Assessment
    • /
    • v.20 no.6
    • /
    • pp.787-795
    • /
    • 2011
  • Noise barrier is generally used with welding of joint rail for railway noise reduction in our country. But the noise barrier for high speed railway has weak point in low frequencies about 315Hz band. In this study, For developing of Interference-type Noise Reduction Device(INRD), acoustic analysis were performed using commercial software. For verifying the improvement in the noise reduction, noise measurement before and after installing of INRD were performed in Anechoic Chamber. From these acoustic analysis and noise measurement, it was known that developed INRD has a good noise reduction performance and can be used efficiently with conventional noise barrier.

A Study on Optimization of the Overall Measurement System for HEMU-400X (차세대고속열차 종합계측시스템 최적화 방안 연구)

  • Lee, Young-Yeob;Ryu, Sang-Hyun;Lee, Jin-Jong;Kim, Kyung-Taek
    • Proceedings of the KSR Conference
    • /
    • 2011.10a
    • /
    • pp.1-6
    • /
    • 2011
  • In Korea, high-speed train(HEMU-400X) system with distributed power is being developed, and the highest test speed of this train is 400km/h. This developed the first high-speed train as a distributed power train in Korea, as well as for the development of train system and evaluation system included evaluation technology is needed. Accordingly, a comprehensive and efficient OMS(Overall Measurement System) was build up for verifying the performance of HEMU-400X. By the case study of the G7 and TTX, OMS of HEMU-400X was improved the test performance and maintainability. In particular, the existing Window-based systems has a limit to the control, due to this reason OMS applying enhanced RT(Real-time) system. In this study, compare the advantages and disadvantages of RT systems with Window-based systems, as well as the configuration of the RT systems.

  • PDF

Reliability Analysis of Degradation Data for LEDs (LED 열화데이터의 신뢰성 분석)

  • Park, Chang-Kyu
    • Journal of Applied Reliability
    • /
    • v.9 no.1
    • /
    • pp.59-69
    • /
    • 2009
  • LEDs have rapidly replaced old light devices such as incandescent or fluorescent lamps, and have been widely applied in general lighting, signals, automobile, signs and others. Since LEDs are for both indoor and outdoor use, temperature and humidity inevitably affect its reliability. We explain the result of the degradation life test on LEDs, and guide to reliability analysis procedure. Analysis on reliability measures are performed by Weibull++6 program, and a common shape parameter of Weibull distribution on the LED is suggested. Also, we make a description of reliability analysis procedures for the degradation data using collected test data from degradation tests. Reliability analysis procedures are consisted of estimating degradation models and failure time, verifying of distribution and parameters of the distribution, and estimating of reliability measures. Finally, this paper suggests reliability analysis method for light characteristics on LEDs.

  • PDF

Verifying the factors on fear of crime applying risk interpretation model (위험해석모형을 적용한 범죄두려움의 영향요인 검증)

  • Song, Young-Nam;Lee, Seung-Woo
    • Korean Security Journal
    • /
    • no.48
    • /
    • pp.177-206
    • /
    • 2016
  • The purpose of this study is to verify the factors that affect the fear of crime by applying the risk interpretation model. Especially, whereas previous studies have not proven micro individual factor that the risk interpretation model had presented, This study includes micro individual elements such as neighborhood factor, perceived risk of crime, fears of crime as main variables. This study utilized secondary data of the National Crime Victimization Survey 2012, conducted by the Korean Institute of Criminology. In this study, multiple regression analysis of two stages and Sobel Test were conducted for verifying the individual influence of each independent variables and identifying the causal relationship between the variables set out in the risk analysis model. As the result, it appeared that the higher level of perceived risk of crime, neighborhood factor, crime experience, education, income cause the higher degree of the fear of crime. On the other hand, the lower degree of age was found to induce the higher level of the fear of crime. In addition, female showed the higher degree of the fear of crime than man. The causal relationship between the variables set out in the risk interpretation model was presented significantly in all variables, except for education.

  • PDF

The Effect of a Family Restaurant's Brand Symbol on Brand Image, Preference, and Purchasing Intention (패밀리 레스토랑의 브랜드 심벌이 브랜드 이미지, 선호도 및 구매의도에 미치는 영향)

  • Kim, Ki-Yeong;Lee, Yong-Ho;Choi, Dong-Hee
    • Culinary science and hospitality research
    • /
    • v.17 no.3
    • /
    • pp.33-46
    • /
    • 2011
  • This study is concerned with the effect of a brand symbol of a family restaurant on brand image, preference, and purchasing intention. With regard to analysis methods, the study carried out a reliability test and a validity test concerning a precedent research concept, ahead of verifying the hypothesis by using the SPSS Ver. 16.0. Also, the study conducted a frequency analysis, technical analysis, exploratory factor analysis, and regression analysis for verifying the hypothesis. As a result of the research, regarding a brand symbol as a visual symbol, three factors including a functional factor, a value factor, and an aesthetic factor were extracted, and of them, the functional factor and an aesthetic factor were discovered to influence of the brand image and preference which affected purchasing intention. In addition, consumers preferred a logo type that includes a company name or a brand name rather than a picture or a mark type of a symbol regarding a brand symbol, and they answered that outdoor advertising would raise awareness more than TV advertising. Based on these results, using a logo type symbol and the mix of outdoor advertising and TV advertising should be considered for brand launch.

  • PDF