• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.17-23
• /
• 2004

소프트웨어 자동 테스팅 도구를 이용하여 테스트 프로세스의 전부 또는 일부를 자동화함으로써 테스트시간의 단축과 테스트 비용을 줄일 수 있다 그러나 하나의 테스팅 도구를 이용하여 이질적인 컴퓨팅 환경에서 다양한 종류의 테스트 요구 사항을 모두 충족시킨다는 것은 현실적으로 불가능하다 본 논문에서는 소프트웨어 자동 테스팅 도구의 분류 기준을 제시하고, 이를 기반으로 상용화된 테스팅 도구들의 특성을 조사, 분석하여 테스팅 도구의 발전 로드맵을 제시함으로써 테스팅 도구들 상호간의 관계성 이해와 향후 테스팅 도구들의 발전 방향을 모색하고자 한다.

• 한국컴퓨터정보학회논문지
• /
• 제22권9호
• /
• pp.187-192
• /
• 2017

In this paper, we have studied scale tools for measure programming task value and learning persistence at elementary school students. In order to develop complete test tools, we have improved the completeness by revising tests through stepwise verification. The first scales were constructed based on the previous studies. As a result of the content validity test, 5 out of 14 items of the task value test tool and 1 out of 10 items of the learning persistence test were not suitable. The second test tools were constructed by revising and supplementing the first scale, and consisted of 13 items of task value and 8 items of learning persistence. As a result of the contents validity test, all the items included in the test tool proved to be valid. The reliability of the secondary testing tools were also found to be reliable at ${\alpha}=.970$ and ${\alpha}=.975$, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1477-1478
• /
• 2004

Science the change of development methods and environment of the software is rapidly kept going in industry, previous manual test methods will not be able to guarantee the quality of software. Therefore the software test automation tools is being developed actively. And many of the tools which is reliable is applied and used in domestic organizations. Indirect test techniques currently are used For the improvement of the software quality, such as formal specification and design, structural programming. And also the various do direct test techniques are used to the measurement of software quality through the fault detection and modification, such as black box, which box and test automation tools. In this survey, the software test automation tools which predicate and access the software quality at the software development phase for the improvement of the software quality should be introduced.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.820-823
• /
• 2005

RFID technology offers the possibility that tools and valuable supplies tagged with RFID devices could be tacked down automatically. Such automated tool tracking has the potential to reduce theft, identify underutilized tools to be relocated, insure that crafts have access to the appropriate tools as needed, and reduce overhead labor cost of managing tools. Although other industries have been busy to enhance their supply chain management using RFID technology, construction professionals may be wondering whether it works reliably in construction jobsites as well. This paper presents a field test conducted to determine the reliability of RFID technology in identifying tools in the field storage box. The test indicated that RFID technology is reliable in inventorying tools in field storage.

• 한국과학교육학회지
• /
• 제39권2호
• /
• pp.263-277
• /
• 2019

이 연구는 1989년 이후 30년간 국내 학술지에 발표된 과학 관련 정의적 영역 검사 도구 활용 현황과 이와 관련한 검사 도구의 수정 사례와 내용을 분석했다. 이로써 향후 검사 도구 개발과 개선 과정에 대한 실질적 정보를 제공하고, 타당한 검사 도구 개발을 위한 근거를 마련했다. 연구는 두 단계로 진행되었다. 정의적 영역 검사 도구를 중심으로 한 국내 과학 교육 연구 88편의 현황과 이들이 참고한 국내 외 원도구 57건의 현황을 분석했다. 그 후 원도구가 개정되었던 사례 5건의 특징과 구체적 문항 수정 사례를 비교했다. 연구 결과 국내 연구 현황에서는 지속적으로 나타난 주제와 최근에 출현하기 시작한 주제, 연구 목적과 평가 방법에 따른 연구 상황, 원도구 활용 현황 등이 분석되었다. 분석 대상 연구의 원도구 중 개정 과정이 공개된 5건의 검사 도구인 TOSRA, SAI, PISA 문항, STEBI-A/B, SMQ 등에 대해 개정 배경과 주요 사항을 분석했다. 개정 전후의 문항이 공개된 4개의 검사 문항을 비교해서 문항의 변천 과정을 분석했다. 분석 결과 문항 개선은 하위 구인의 변화에 따른 신설과 삭제, 가독성 향상, 의미를 명료화하는 방향으로 진행되고 있었다. 본 연구 결과의 시사점으로 여러 구인이 혼재된 검사 도구에서 얻은 결과 해석상 유의점, 연구의 지평을 넓혀주는 검사 도구의 가능성, 주관적 자기 보고에서 나타나는 오차 인식, 타학문에서 유래한 검사 도구를 과학과에 적용시킬 때 유의할 점 등을 제안했다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.540-544
• /
• 1996

To apply the CVD diamond film to coated tools, it is necessary to make adhesion strength between diamond film and substrate stronger. So adhesion strength of diamond coated WC-Co tools using Microwave Plasma CVD and cutting test of Al-18mass%Si alloy using diamond cutting tools were studied. Diamond coating was carried out using Microwave Plasma CVD apparatus. Reaction gas was used mixture of methane and hydrogen. Substrate temperature were varied from 673K to 1173K by control of microwave output power and reaction pressure. By observation of SEM, grain size became larger and larger as substrate temperature became higher and higher. Also all deposits were covered with clear diamond crystals. XRD results, the deposits were identified to cubic diamond. An analysis using Raman spectroscopy, the deposit synthesized at lower substrate temperature (673K) showed higher quality than deposit synthesized at higher substrate temperature (1173K). As a result of scratch adhesion strength test, from 873K to 1173K adhesion strength decreased by rising of substrate temperature. The deposit synthesized at 873K showed best adhesion strength. In the cutting test of Al-18mass%Si alloy using diamond coated tools and the surface machinability of Al-Si works turned with diamond coating tools which synthesized at 873K presented uniform roughness. Cutting performance of Al-18mass%Si alloys using diamond coated WC-Co tools related to the adhesion strength.

• 대한물리치료과학회지
• /
• 제3권2호
• /
• pp.1037-1045
• /
• 1996

The purposes of this survey are to investigate which inventory are used to assess the disables children, to give information and basic data for developing new inventory for disabled children. 1. 8 institutes (40 %) have no test or evaluate tools. 2. Number of tools of rehabilitation institutes have more than hospital. 3. 86.8% of tools are made in United States. 4. 52.2 % of tools do not test validity and reliability 5. 43.5% of tools are tested for gross and fine motor functions. 6. The interval of reassesstment are very irregulary(43.5 %). So, We suggest that Korean physical therapist should be made tools which is tested motor, perception and cognition with validity and relability for CNS dysfuntion patients.

• 한국생활과학회지
• /
• 제17권1호
• /
• pp.35-43
• /
• 2008

The purpose of this study is to develop evaluation tools for young children's mathematical ability based on the content standards of NCTM and to verify the suitability of the tools. The tools consist of 5 sub-tests with 90 items, including number and operation, algebra, geometry, measurement, data analysis and probability. The tool analysis was examined with 300 three-to five-years-old children and 31 math education professionals. The results of this research are as follows : First, in order of age the passing rate increased. The gap between high and low score group reveals a statistically meaningful difference. Second, the internal consistency reliability coefficient, Cronbach ${\alpha}$, is .96. Test-retest reliability is around .90. The concurrent validity correlation between this tools and Choi Hye-Jin's test(2003) is .85. The analysis of the content validity was proved appropriately by math education professionals.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.126-137
• /
• 1993

This paper presents an efficient method for the identification of motion error sources in NC machine tools by making use of the circular interpolation test, which is often used in estimating the motion accuracy of NC machine tools. Mathematical formulae are described for motion errors due to various kinds of error sources. Two identification formulae are proposed: one is based on the frequency analysis and the other is formulated with the weithted residual method. Motion error signal is classified into two patterns, mean errors(mean of CW and CCW test signals from mean errors). The sources of the mean errors are identified by using the frequency analysis technique and the sources of the deviation errors by the weighted residual formulaltion. A menu driven, user oriented, computer program is written to realize the full steps of the proposed identificationprocedure. Then, the identification method is applied to two NC machine tools.